FreeBSD Manual Pages
flowgrind(1) Flowgrind Manual flowgrind(1) NAME flowgrind - advanced TCP traffic generator for Linux, FreeBSD, and Mac OS X SYNOPSIS flowgrind [OPTION]... DESCRIPTION flowgrind is an advanced TCP traffic generator for testing and bench- marking Linux, FreeBSD, and Mac OS X TCP/IP stacks. In contrast to other performance measurement tools it features a distributed architec- ture, where throughput and other metrics are measured between arbitrary flowgrind server processes, flowgrind daemon flowgrindd(1). Flowgrind measures besides goodput (throughput), the application layer interarrival time (IAT) and round-trip time (RTT), blockcount and net- work transactions/s. Unlike most cross-platform testing tools, flow- grind collects and reports the TCP metrics returned by the TCP_INFO socket option, which are usually internal to the TCP/IP stack. On Linux and FreeBSD this includes among others the kernel's estimation of the end-to-end RTT, the size of the TCP congestion window (CWND) and slow start threshold (SSTHRESH). Flowgrind has a distributed architecture. It is split into two compo- nents: the flowgrind daemon, flowgrindd(1), and the flowgrind con- troller. Using the controller, flows between any two systems running the flowgrind daemon can be setup (third party tests). At regular in- tervals during the test the controller collects and displays the mea- sured results from the daemons. It can run multiple flows at once with the same or different settings and individually schedule every one. Test and control connection can optionally be diverted to different in- terfaces. The traffic generation itself is either bulk transfer, rate-limited, or sophisticated request/response tests. Flowgrind uses libpcap to auto- matically dump traffic for qualitative analysis. OPTIONS They are two important groups of options: controller options and flow options. Like the name suggests, controller options apply globally and potentially affect all flows, while flow-specific options only apply to the subset of flows selected using the -F option. Mandatory arguments to long options are mandatory for short options too. General options -h, --help[=WHAT] display help and exit. Optional WHAT can either be 'socket' for help on socket options or 'traffic' traffic generation help -v, --version print version information and exit Controller options -c, --show-colon=TYPE[,TYPE]... display intermediated interval report column TYPE in output. Allowed values for TYPE are: 'interval', 'through', 'transac', 'iat', 'kernel' (all show per default), and 'blocks', 'rtt', 'delay' (optional) -d, --debug increase debugging verbosity. Add option multiple times to in- crease the verbosity -e, --dump-prefix=PRE prepend prefix PRE to dump filename (default: "flowgrind-") -i, --report-interval=#.# reporting interval, in seconds (default: 0.05s) --log-file[=FILE] write output to logfile FILE (default: flowgrind-'time- stamp'.log) -m report throughput in 2**20 bytes/s (default: 10**6 bit/s) -n, --flows=# number of test flows (default: 1) -o overwrite existing log files (default: don't) -p don't print symbolic values (like INT_MAX) instead of numbers -q, --quiet be quiet, do not log to screen (default: off) -s, --tcp-stack=TYPE don't determine unit of source TCP stacks automatically. Force unit to TYPE, where TYPE is 'segment' or 'byte' -w write output to logfile (same as --log-file) Flow options All flows have two endpoints, a source and a destination. The distinc- tion between source and destination endpoints only affects connection establishment. When starting a flow the destination endpoint listens on a socket and the source endpoint connects to it. For the actual test this makes no difference, both endpoints have exactly the same capabil- ities. Data can be sent in either direction and many settings can be configured individually for each endpoint. Some of these options take the flow endpoint as argument, denoted by 'x' in the option syntax. 'x' needs to be replaced with either 's' for the source endpoint, 'd' for the destination endpoint or 'b' for both endpoints. To specify different values for each endpoints, separate them by comma. For instance -W s=8192,d=4096 sets the advertised window to 8192 at the source and 4096 at the destination. -A x use minimal response size needed for RTT calculation (same as -G s=p:C:40) -B x=# set requested sending buffer, in bytes -C x stop flow if it is experiencing local congestion -D x=DSCP DSCP value for type-of-service (TOS) IP header byte -E enumerate bytes in payload instead of sending zeros -F #[,#]... Flow options following this option apply only to the given flow IDs. Useful in combination with -n to set specific options for certain flows. Numbering starts with 0, so -F 1 refers to the second flow. With -1 all flow can be referred -G x=(q|p|g):(C|U|E|N|L|P|W):#1:[#2] activate stochastic traffic generation and set parameters ac- cording to the used distribution. For additional information see section 'Traffic Generation Option' -H x=HOST[/CONTROL[:PORT]] test from/to HOST. Optional argument is the address and port for the CONTROL connection to the same host. An endpoint that isn't specified is assumed to be localhost -J # use random seed # (default: read /dev/urandom) -I enable one-way delay calculation (no clock synchronization) -L call connect() on test socket immediately before starting to send data (late connect). If not specified the test connection is established in the preparation phase before the test starts -M x dump traffic using libpcap. flowgrindd(1) must be run as root -N shutdown() each socket direction after test flow -O x=OPT set socket option OPT on test socket. For additional information see section 'Socket Options' -P x do not iterate through select() to continue sending in case block size did not suffice to fill sending queue (pushy) -Q summarize only, no intermediated interval reports are computed (quiet) -R x=#.#(z|k|M|G)(b|B) send at specified rate per second, where: z = 2**0, k = 2**10, M = 2**20, G = 2**30, and b = bits/s (default), B = bytes/s -S x=# set block (message) size, in bytes (same as -G s=q:C:#) -T x=#.# set flow duration, in seconds (default: s=10,d=0) -U x=# set application buffer size, in bytes (default: 8192) truncates values if used with stochastic traffic generation -W x=# set requested receiver buffer (advertised window), in bytes -Y x=#.# set initial delay before the host starts to send, in seconds TRAFFIC GENERATION OPTION Via option -G flowgrind supports stochastic traffic generation, which allows to conduct besides normal bulk also advanced rate-limited and request-response data transfers. The stochastic traffic generation option -G takes the flow endpoint as argument, denoted by 'x' in the option syntax. 'x' needs to be replaced with either 's' for the source endpoint, 'd' for the destination end- point or 'b' for both endpoints. However, please note that bidirec- tional traffic generation can lead to unexpected results. To specify different values for each endpoints, separate them by comma. -G x=(q|p|g):(C|U|E|N|L|P|W):#1:[#2] Flow parameter: q request size (in bytes) p response size (in bytes) g request interpacket gap (in seconds) Distributions: C constant (#1: value, #2: not used) U uniform (#1: min, #2: max) E exponential (#1: lamba - lifetime, #2: not used) N normal (#1: mu - mean value, #2: sigma_square - variance) L lognormal (#1: zeta - mean, #2: sigma - std dev) P pareto (#1: k - shape, #2: x_min - scale) W weibull (#1: lambda - scale, #2: k - shape) Advanced distributions like weibull are only available if flow- grind is compiled with libgsl support. -U # specify a cap for the calculated values for request and response sizes, needed because the advanced distributed values are un- bounded, but we need to know the buffersize (it's not needed for constant values or uniform distribution). Values outside the bounds are recalculated until a valid result occurs but at most 10 times (then the bound value is used) SOCKET OPTION Flowgrind allows to set the following standard and non-standard socket options via option -O. All socket options take the flow endpoint as argument, denoted by 'x' in the option syntax. 'x' needs to be replaced with either 's' for the source endpoint, 'd' for the destination endpoint or 'b' for both end- points. To specify different values for each endpoints, separate them by comma. Moreover, it is possible to repeatedly pass the same endpoint in order to specify multiple socket options. Standard socket options -O x=TCP_CONGESTION=ALG set congestion control algorithm ALG on test socket -O x=TCP_CORK set TCP_CORK on test socket -O x=TCP_NODELAY disable nagle algorithm on test socket -O x=SO_DEBUG set SO_DEBUG on test socket -O x=IP_MTU_DISCOVER set IP_MTU_DISCOVER on test socket if not already enabled by system default -O x=ROUTE_RECORD set ROUTE_RECORD on test socket Non-standard socket options -O x=TCP_MTCP set TCP_MTCP (15) on test socket -O x=TCP_ELCN set TCP_ELCN (20) on test socket -O x=TCP_LCD set TCP_LCD (21) on test socket EXAMPLES flowgrind testing localhost IPv4 TCP performance with default settings, same as flowgrind -H b=127.0.0.1 -T s=10,d=0. The flowgrind dae- mon needs to be run on localhost flowgrind -H b=::1/127.0.0.1 same as above, but testing localhost IPv6 TCP performance with default settings flowgrind -H s=host1,d=host2 bulk TCP transfer between host1 and host2. Host1 acts as source, host2 as destination endpoint. Both endpoints need to be run the flowgrind daemon. The default flow options are used, with a flow duration of 10 seconds and a data stream from host1 to host2 flowgrind -H s=host1,d=host2 -T s=0,d=10 same as the above but instead with a flow sending data for 10 seconds from host2 to host1 flowgrind -n 2 -F 0 -H s=192.168.0.1,d=192.168.0.69 -F 1 -H s=10.0.0.1,d=10.0.0.2 setup two parallel flows, first flow between 192.168.0.1 and 192.168.0.69, second flow between 10.0.0.1 to 10.0.0.2 flowgrind -p -H s=10.0.0.100/192.168.1.100,d=10.0.0.101/192.168.1.101 -A s setup one flow between 10.0.0.100 and 10.0.0.101 and use 192.168.1.x IP addresses for controll traffic. Activate minimal response for RTT calculation flowgrind -i 0.001 -T s=1 | egrep ^S | gnuplot -persist -e 'plot "-" using 3:5 with lines title "Throughput" ' setup one flow over loopback device and plot the data of the sender with the help of gnuplot flowgrind -G s=q:C:400 -G s=p:N:2000:50 -G s=g:U:0.005:0.01 -U 32000 -G s=q:C:400 : use constant request size of 400 bytes -G s=p:N:2000:50 : use normal distributed response size with mean 2000 bytes and variance 50 -G s=g:U:0.005:0.01 : use uniform distributed interpacket gap with min 0.005s and and max 10ms -U 32000: truncate block sizes at 32 kbytes (needed for normal distribution) TRAFFIC SCENARIOS The following examples demonstrate how flowgrind's traffic generation capability can be used. These have been incorporated in different tests for flowgrind and have been proven meaningful. However, as Internet traffic is diverse, there is no guarantee that these are appropriate in every situation. Request Response Style (HTTP) This scenario is based on the work in http://www.3gpp2.org/Pub- lic_html/specs/C.R1002-0_v1.0_041221.pdf. flowgrind -M s -G s=q:C:350 -G s=p:L:9055:115.17 -U 100000 -r 42: use random seed 42 to make measurements reproducible -M s: dump traffic on sender side -G s=q:C:350 : use constant requests size 350 bytes -G s=p:L:9055:115 : use lognormal distribution with mean 9055 and variance 115 for response size -U 100000: Truncate response at 100 kbytes For this scenario we recommend to focus on RTT (lower values are bet- ter) and Network Transactions/s as metric (higher values are better). Interactive Session (Telnet) This scenario emulates a telnet session. flowgrind -G s=q:U:40:10000 -G s=q:U:40:10000 -O b=TCP_NODELAY -G s=q:U:40:10000 -G s=q:U:40:10000 : use uniform distributed request and response size between 40B and 10kB -O b=TCP_NODELAY: set socket options TCP_NODELAY as used by tel- net applications For this scenario RTT (lower is better) and Network Transactions/s are useful metrics (higher is better). Rate Limited (Streaming Media) This scenario emulates a video stream transfer with a bitrate of 800 kbit/s. flowgrind -G s=q:C:800 -G s=g:N:0.008:0.001 Use normal distributed interpacket gap with mean 0.008 and a small variance (0.001). In conjunction with a request size of 800 bytes an average bitrate of approx 800 kbit/s is achieved. The variance is added to emulate a variable bitrate like it's used in todays video codecs. For this scenario the IAT (lower is better) and minimal throughput (higher is better) are interesting metrics. OUTPUT COLUMNS Flow/endpoint identifiers # flow endpoint, either 'S' for source or 'D' for destination ID numerical flow identifier begin and end boundaries of the measurement interval in seconds. The time shown is the elapsed time since receiving the RPC message to start the test from the daemons point of view Application layer metrics through transmitting goodput of the flow endpoint during this measure- ment interval, measured in Mbit/s (default) or MB/s (-m) transac number of successfully received response blocks per second (we call it network transactions/s) requ/resp number of request and response block sent during this measure- ment interval (column disabled by default) IAT block inter-arrival time (IAT). Together with the minimum and maximum the arithmetic mean for that specific measurement inter- val is displayed. If no block is received during report inter- val, 'inf' is displayed. DLY and RTT 1-way and 2-way block delay respectively the block latency and the block round-trip time (RTT). For both delays the minimum and maximum encountered values in that measurement interval are dis- played together with the arithmetic mean. If no block, respec- tively block acknowledgment is arrived during that report inter- val, 'inf' is displayed. Both, the 1-way and 2-way block delay are disabled by default (see option -I and -A). Kernel metrics (TCP_INFO) All following TCP specific metrics are obtained from the kernel through the TCP_INFO socket option at the end of every report interval. The sampling rate can be changed via option -i. cwnd (tcpi_cwnd) size of TCP congestion window (CWND) in number of segments (Linux) or bytes (FreeBSD) ssth (tcpi_snd_sshtresh) size of the slow-start threshold in number of segments (Linux) or bytes (FreeBSD) uack (tcpi_unacked) number of currently unacknowledged segments, i.e., number of segments in flight (FlightSize) (Linux only) sack (tcpi_sacked) number of selectively acknowledged segments (Linux only) lost (tcpi_lost) number of segments assumed lost (Linux only) retr (tcpi_retrans) number of unacknowledged retransmitted segments (Linux only) tret (tcpi_retransmits) number of retransmissions triggered by a retransmission timeout (RTO) (Linux only) fack (tcpi_fackets) number of segments between SND.UNA and the highest selectively acknowledged sequence number (SND.FACK) (Linux only) reor (tcpi_reordering) segment reordering metric. The Linux kernel can detect and cope with reordering without significant loss of performance if the distance a segment gets displaced does not exceed the reordering metric (Linux only) rtt (tcpi_rtt) and rttvar (tcpi_rttvar) TCP round-trip time and its variance given in ms rto (tcpi_rto) the retransmission timeout given in ms bkof (tcpi_backoff) number of RTO backoffs (Linux only) ca state (tcpi_ca_state) internal state of the TCP congestion control state machine as implemented in the Linux kernel. Can be one of open, disorder, cwr, recovery or loss (Linux only) Open is the normal state. It indicates that no duplicate ac- knowledgment (ACK) is received and no segment is consid- ered lost Disorder is entered upon the reception of the first consecutive duplicate ACK or selective acknowledgment (SACK) CWR is entered when a notification from Explicit Congestion Notification (ECN) is received Recovery is entered when three duplicate ACKs or a equivalent num- ber of SACKs are received. In this state congestion con- trol and loss recovery procedures like Fast Retransmit and Fast Recovery (RFC 5861) are executed Loss is entered if the RTO expires. Again congestion control and loss recovery procedures are executed smss and pmtu sender maximum segment size and path maximum transmission unit in bytes Internal flowgrind state (only enabled in debug builds) status state of the flow inside flowgrind for diagnostic purposes. It is a tuple of two values, the first for sending and the second for receiving. Ideally the states of both the source and desti- nation endpoints of a flow should be symmetrical but since they are not synchronized they may not change at the same time. The possible values are: c Direction completed sending/receiving d Waiting for initial delay f Fault state l Active state, nothing yet transmitted or received n Normal activity, some data got transmitted or received o Flow has zero duration in that direction, no data is go- ing to be exchanged AUTHORS Flowgrind was original started by Daniel Schaffrath. The distributed measurement architecture and advanced traffic generation were later on added by Tim Kosse and Christian Samsel. Currently, flowgrind is devel- oped and maintained by Arnd Hannemann and Alexander Zimmermann. BUGS The development and maintenance of flowgrind is primarily done via github <https://github.com/flowgrind/flowgrind>. Please report bugs via the issue webpage <https://github.com/flowgrind/flowgrind/issues>. NOTES Output of flowgrind is gnuplot compatible, so you can easily plot flowlogs flowgrind's output (aka flowlogs) SEE ALSO flowgrindd(1), flowgrind-stop(1), gnuplot(1) January 2021 flowgrind(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | TRAFFIC GENERATION OPTION | SOCKET OPTION | EXAMPLES | TRAFFIC SCENARIOS | OUTPUT COLUMNS | AUTHORS | BUGS | NOTES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=flowgrind&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>