FreeBSD Manual Pages
hpct-query(1) General Commands Manual hpct-query(1) NAME hpct-query -- HiPerConTracer Query Tool SYNOPSIS hpct-query database_configuration ping|traceroute [-L level | --loglevel level] [-Z on|off | --logcolor on|off] [-O file | --logfile file] [-q | --quiet] [-v | --verbose] [-o filename | --output filename] [-T table_name | --table table_name] [-V version | --table-version version] [-M mapping_file | --address-to-measurementid mapping_file] [--from-time timestamp] [--to-time timestamp] [--from-measurement-id measurement_identifier] [--to-measurement-id measurement_identifier] DESCRIPTION hpct-query provides a simple query command to query a HiPerConTracer database for Ping or Traceroute results within a given time range. The output format is that same as the uncompressed HiPerConTracer results formant. See the HiPerConTracer manpage for the format description. ARGUMENTS The following argument may be provided: -L level | --loglevel level Sets the minimum logging level to the provided value: 0=trace, 1=debug, 2=info, 3=warning, 4=error, 5=fatal. -Z on|off | --logcolor on|off Enables (on) or disables (off) the usage of ANSI color escape sequences to colorise the log output according to its level. -O file | --logfile file Sets a file name for appending the log output to. If a file is set, no log output is made to the console. Otherwise, all log output will be written to the console. -q | --quiet Sets the minimum logging level to 3 (warning). -v | --verbose Sets the minimum logging level to 0 (trace). -o filename | --output filename Sets the specified filename as output file. Extensions .gz, .bz2, and .xz are recognised to enable compression. -T table_name | --table table_name Sets a custom table name to query from. -V version | --tabl-version version Sets the table version (default is: 2). This option is to be used to read a table from on older HiPerConTracer schema ver- sion. -M mapping_file | --address-to-measurementid mapping_file Sets a mapping file, containing space-separated IP address to measurement ID mappings with one mapping per line. Where mea- surement ID is zero, the measurement ID is looked up from the mappings. This option can be used to later map measurements to a useful measurement ID for export. Example mapping file con- tents: 1.2.3.4 1000 3ffe::1:2:3 1000 5.6.7.8 2222 2001::1:2:3 2222 ... --from-time timestamp Set the beginning of the time range as string in format "%Y-%m-%d %H:%M:%S.%F". If not provided, all results will be queried. --to-time timestamp Set the end of the time range as string in format "%Y-%m-%d %H:%M:%S.%F". If not provided, all results after a given from- time will be queried. Note: data at to-time timestamp is not included in the export, only time stamps less than to-time! That is, the time interval for export is [from-timestamp, to- timestamp). This ensures the possibility to for example export daily batches without having the same value included in two files! --from-measurement-id measurement_identifier Set the beginning of the measurement identifier range. If not provided, all results will be queried. --to-measurement-id measurement_identifier Set the end of the measurement identifier range. If not pro- vided, all results will be queried. EXAMPLES hpct-query hipercontracer-database.conf ping hpct-query hipercontracer-database.conf traceroute hpct-query hipercontracer-database.conf ping --from-time 2022-09-29 13:00:00 hpct-query hipercontracer-database.conf traceroute --from-time 2022-09-29 00:00:00 --to-time 2022-09-29 12:00:00 hpct-query hipercontracer-database.conf traceroute --from-measurement-id 1000 --to-measurement-id 2000 hpct-query hipercontracer-database.conf traceroute --from-measurement-id 1000 --to-measurement-id 2000 --output results.xz hpct-query hipercontracer-database.conf ping --table test_ping_table hpct-query hipercontracer-database.conf traceroute -T Traceroute_v1 -V 1 --from-time 2015-10-16 --to-time 2015-10-17 -o Traceroute-2015-10-16.hpct.xz -M addressmappings.txt AUTHORS Thomas Dreibholz https://www.nntb.no/~dreibh/hipercontracer mailto://dreibh@simula.no hpct-query December 19, 2024 hpct-query(1)
NAME | SYNOPSIS | DESCRIPTION | ARGUMENTS | EXAMPLES | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=hpct-query&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>