FreeBSD Manual Pages
MSTFLINT(1) User Commands MSTFLINT(1) NAME mstflint - Flash Interface DESCRIPTION NAME mstflint - Flash Interface SYNOPSIS mstflint [OPTIONS] <command> [Parameters] [-d|--device <device>] [-i|--image <image>] [--latest_fw] [--ir] [-h|--help] [--hh] [-y|--yes] [--no] [--guid <GUID>] [--guids <GUIDS...>] [--mac <MAC>] [--macs <MACs...>] [--uid <UID>] [--blank_guids] [--clear_semaphore] [--qq] [--low_cpu] [--flashed_version] [--nofs] [--allow_rom_change] [--over- ride_cache_replacement] [--no_flash_verify] [--use_fw] [-s|--silent] [--vsd <string>] [--use_image_ps] [--use_im- age_guids] [--use_image_rom] [--use_dev_rom] [--ignore_dev_data] [--no_fw_ctrl] [--dual_image] [--striped_image] [--banks <bank>] [--log <log_file>] [--flash_params <type, log2size, num_of_flashes>] [-v|--version] [--private_key <key_file>] [--key_uuid <uuid_file>] [--private_key2 <key_file>] [--hmac_key <hmac_key>] [--key_uuid2 <uuid_file>] DESCRIPTION flint is a FW (firmware) burning and flash memory operations tool for Mellanox Infiniband HCAs,Ethernet NIC cards, and switch devices. OPTIONS -d|--device <device> Device flash is connected to. Commands affected: all -i|--image <image> Binary image file. Commands affected: burn, verify --latest_fw : Commands affected: burn --ir : Commands affected: burn -h|--help Prints this message and exits --hh Prints extended command help -y|--yes Non interactive mode - assume answer "yes" to all questions. Commands affected: all --no Non interactive mode - assume answer "no" to all questions. Commands affected: all --guid <GUID> GUID base value. 4 GUIDs are automatically assigned to the fol- lowing values: guid -> node GUID guid+1 -> port1 guid+2 -> port2 guid+3 -> system image GUID. Note: port2 guid will be assigned even for a single port HCA - The HCA ignores this value. Commands affected: burn, sg --guids <GUIDS...> 4 GUIDs must be specified here. The specified GUIDs are as- signed to the following fields, respectively: node, port1, port2 and system image GUID. Note: port2 guid must be specified even for a single port HCA - The HCA ignores this value. It can be set to 0x0. Commands affected: burn, sg --mac <MAC> MAC address base value. 2 MACs are automatically assigned to the following values: mac -> port1 mac+1 -> port2 Commands affected: burn, sg --macs <MACs...> 2 MACs must be specified here. The specified MACs are assigned to port1, port2, respectively. Commands affected: burn, sg Note: -mac/-macs flags are applicable only for Mellanox Technologies ethernet products. --uid <UID> ConnectIB/SwitchIB only. Derive and set the device UIDs (GUIDs, MACs, WWNs). UIDs are derived from the given base UID according to Mellanox Methodology Commands affected: burn, sg --blank_guids Burn the image with blank GUIDs and MACs (where applicable). These values can be set later using the "sg" command (see de- tails below). Commands affected: burn --clear_semaphore Force clear the flash semaphore on the device. No command is allowed when this flag is used. NOTE: May result in system in- stability or flash corruption if the device or another applica- tion is currently using the flash. Exercise caution. --qq Run a quick query. When specified, flint will not perform full image integrity checks during the query operation. This may shorten execution time when running over slow interfaces (e.g., I2C, MTUSB-1). Commands affected: query --low_cpu : When specified, cpu usage will be reduced. Run time might be increased Commands affected: query --flashed_version : When specified, only flashed fw version is fetched Commands affected: query --nofs Burn image in a non failsafe manner. --allow_rom_change Allow burning/removing a ROM to/from FW image when product ver- sion is present. Use only if you know what you are doing --override_cache_replacement On SwitchX/ConnectIB devices: Allow accessing the flash even if the cache replacement mode is enabled. NOTE: This flag is in- tended for advanced users only. Running in this mode may cause the firmware to hang. --no_flash_verify Do not verify each write on the flash. --use_fw Flash access will be done using FW (ConnectX-3/ConnectX-3Pro only). -s|--silent Do not print burn progress flyer. Commands affected: burn --vsd <string> Write this string, of up to 208 characters, to VSD when burn. --use_image_ps Burn vsd as appears in the given image - do not keep existing VSD on flash. Commands affected: burn --use_image_guids Burn (guids/macs) as appears in the given image. Commands af- fected: burn --use_image_rom Do not save the ROM which exists in the device. Commands af- fected: burn --use_dev_rom Save the ROM which exists in the device. Commands affected: burn --ignore_dev_data Do not attempt to take device data sections from device(sections will be taken from the image. FS3 Only). Commands affected: burn --no_fw_ctrl Do not attempt to work with the FW Ctrl update commands --dual_image Make the burn process burn two images on flash (previously de- fault algorithm). Current default failsafe burn process burns a single image (in alternating locations). Commands affected: burn --striped_image Use this flag to indicate that the given image file is in a "striped image" format. Commands affected: query verify --banks <bank> Set the number of attached flash devices (banks) --log <log_file> Print the burning status to the specified log file --flash_params <type, log2size, num_of_flashes> Use the given parameters to access the flash instead of reading them from the flash. Supported parameters: Type: The type of the flash, such as:M25PXxx, M25Pxx, N25Q0XX, SST25VFxx, W25QxxBV, W25Xxx, W25Qxxx, W25Qxxx, AT25DFxxx, S25FLXXXP, S25FL11xx, MX25L16xxx, MX25Lxxx, S25FLxxx, IS25LPxxx. log2size: The log2 of the flash size.num_of_flashes: the number of the flashes connected to the device. -v|--version Version info. --private_key <key_file> path to PEM formatted private key to be used by the sign command --key_uuid <uuid_file> UUID matching the given private key to be used by the sign com- mand --private_key2 <key_file> path to PEM formatted private key to be used by the sign command --hmac_key <hmac_key> path to file containing key (For FS4 image only). --key_uuid2 <uuid_file> UUID matching the given private key to be used by the sign com- mand COMMANDS SUMMARY burn|b -ir Burn flash. Use "-ir burn" flag to perform image reactivation prior burning. query|q [full] Query misc. flash/firmware characteristics, use "full" to get more information. verify|v [showitoc] Verify entire flash, use "showitoc" to see ITOC headers in FS3/FS4 image only. swreset SW reset the target switch device.This command is supported only in the In-Band access method. brom <ROM-file> : Burn the specified ROM file on the flash. drom Remove the ROM section from the flash. rrom <out-file> : Read the ROM section from the flash. bb Burn Block - Burns the given image as is. No checks are done. sg [guids_num=<num|num_port1,num_port2> step_size=<size|size_port1,size_port2>] | [nocrc] : Set GUIDs. sv : Set the VSD. ri <out-file> : Read the fw image on the flash. dc [out-file] : Dump Configuration: print fw configuration file for the given image. dh [out-file] : Dump Hash: dump the hash if it is integrated in the FW image set_key [key] : Set/Update the HW access key which is used to enable/disable access to HW. The key can be provided in the command line or interactively typed after the command is given NOTE: The new key is activated only after the device is reset. hw_access <enable|disable> [key] : Enable/disable the access to the HW. The key can be provided in the command line or interactively typed after the command is given hw query : Query HW info and flash attributes. erase|e <addr> Erases sector. rw <addr> : Read one dword from flash ww <addr> <data> : Write one dword to flash wwne <addr> <data> : Write one dword to flash without sector erase wbne <addr> <size> <data ...> : Write a data block to flash without sector erase. wb <data-file> <addr> : Write a data block to flash. rb <addr> <size> [out-file] : Read a data block from flash clear_semaphore Clear flash semaphore. qrom query ROM image. checksum|cs perform MD5 checksum on FW. timestamp|ts <set|query|reset> [timestamp] [FW version] : FW time stamping. cache_image|ci : cache FW image(Windows only). sign : Sign firmware image file sign_with_hmac : Sign image with HMAC set_public_keys [public keys binary file] : Set Public Keys (For FS3/FS4 image only). set_forbid- den_versions [forbidden versions binary file] : Set Forbidden Versions (For FS3/FS4 image only). image_reactivate|ir : Reactivate previous flash image. For FW controlled devices only. binary_compare|bc : Binary compare between device firmware and given BIN file. If there is a silent mode, no progress is dis- played. RETURN VALUES 0 Successful completion. 1 An error has occurred. 7 For burn command - FW already updated - burn was aborted. SEE ALSO mstarchive(1) mstflint March 2020 MSTFLINT(1)
NAME | DESCRIPTION | SYNOPSIS | OPTIONS | RETURN VALUES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mstflint&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>