Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
OCF_HEARTBEAT_OVSMON(7)	      OCF resource agents      OCF_HEARTBEAT_OVSMON(7)

NAME
       ocf_heartbeat_ovsmonitor	- Monitors ovs bonding bonds

SYNOPSIS

       ovsmonitor [start | stop	| status | monitor | meta-data | validate-all]

DESCRIPTION
       Monitor the vitality of a local ovs bond.

       You may set up this RA as a clone resource to monitor the network bonds
       on different nodes, with	the same bond name. This is not	related	to the
       IP address or the network on which a bond is configured.	You may	use
       this RA to move resources away from a node, which has a faulty bond or
       prevent moving resources	to such	a node.	This gives you independent
       control of the resources, without involving cluster intercommunication.
       But it requires your nodes to have more than one	network	bond.

       The resource configuration requires a monitor operation,	because	the
       monitor does the	main part of the work. In addition to the resource
       configuration, you need to configure some location constraints, based
       on a CIB	attribute value. The name of the attribute value is configured
       in the 'name' option of this RA.

       Example constraint configuration	using crmsh location
       loc_connected_node my_resource_grp rule ="rule_loc_connected_node"
       -INF: ovsmonitor-bond-public eq 0

       Example constraint configuration	using pcs. Only	allow 'my_resource' to
       run on nodes where eth0 ethernet	device is available. pcs constraint
       location	my_resource rule score=-INFINITY ovsmonitor-bond-public	ne 1

       The ethmonitor works in 3 different modes to test the bond vitality. 1.
       call ovs-appctl to see if at least one of the bonding's link status is
       up (if link is down -> error) 2.	call ovs-ofctl and watch the RX
       counter (if packages come around	in a certain time -> success) 3.
       return error

SUPPORTED PARAMETERS
       bond
	   The name of the network bond	which should be	monitored (e.g.
	   bond-public).

	   (unique, required, string, no default)

       bridge
	   The name of the ovs bridge that contains the	bridge.

	   (unique, required, string, no default)

       name
	   The name of the CIB attribute to set. This is the name to be	used
	   in the constraints. Defaults	to "ovsmonitor-'bond_name'".

	   (unique, optional, string, no default)

       multiplier
	   Multiplier for the value of the CIB attriobute specified in
	   parameter name.

	   (optional, integer, default 1)

       repeat_count
	   Specify how often the bond will be monitored, before	the status is
	   set to failed. You need to set the timeout of the monitoring
	   operation to	at least repeat_count *	repeat_interval

	   (optional, integer, default 5)

       repeat_interval
	   Specify how long to wait in seconds between the repeat_counts.

	   (optional, integer, default 10)

       pktcnt_timeout
	   Timeout for the RX packet counter. Stop listening for packet
	   counter changes after the given number of seconds.

	   (optional, integer, default 5)

       link_status_only
	   Only	report success based on	link status. Do	not perform RX counter
	   related connectivity	tests.

	   (optional, boolean, default false)

SUPPORTED ACTIONS
       This resource agent supports the	following actions (operations):

       start
	   Starts the resource.	Suggested minimum timeout: 60s.

       stop
	   Stops the resource. Suggested minimum timeout: 20s.

       status
	   Performs a status check. Suggested minimum timeout: 60s. Suggested
	   interval: 10s.

       monitor
	   Performs a detailed status check. Suggested minimum timeout:	60s.
	   Suggested interval: 10s.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested
	   minimum timeout: 5s.

       validate-all
	   Performs a validation of the	resource configuration.	Suggested
	   minimum timeout: 20s.

EXAMPLE	CRM SHELL
       The following is	an example configuration for a ovsmonitor resource
       using the crm(8)	shell:

	   primitive p_ovsmonitor ocf:heartbeat:ovsmonitor \
	     params \
	       bond=string \
	       bridge=string \
	     op	monitor	depth="0" timeout="60s"	interval="10s"

EXAMPLE	PCS
       The following is	an example configuration for a ovsmonitor resource
       using pcs(8)

	   pcs resource	create p_ovsmonitor ocf:heartbeat:ovsmonitor \
	     bond=string \
	     bridge=string \
	     op	monitor	OCF_CHECK_LEVEL="0" timeout="60s" interval="10s"

SEE ALSO
       http://clusterlabs.org/

AUTHOR
       ClusterLabs contributors	(see the resource agent	source for information
       about individual	authors)

resource-agents	4.13.0		  04/12/2025	       OCF_HEARTBEAT_OVSMON(7)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ocf_heartbeat_ovsmonitor&sektion=7&manpath=FreeBSD+Ports+14.3.quarterly>

home | help