FreeBSD Manual Pages

home | help

sreport(1) Slurm Commands sreport(1)

NAME
sreport - Generate reports from the slurm accounting data.

SYNOPSIS
sreport [OPTIONS...] [COMMAND...]

DESCRIPTION
sreport is used to generate reports of job usage and cluster utiliza-
tion for Slurm jobs saved to the Slurm Database, slurmdbd.

OPTIONS
-a, --all_clusters
Use all clusters instead of only the cluster from which the com-
mand was executed.

-M, --cluster
The cluster(s) to generate reports for. Default is local clus-
ter, unless the local cluster is currently part of a federation
and in that case generate a report for all clusters in the cur-
rent federation. If the clusters included in a federation vary
through time, use this option to identify the clusters to be in-
cluded in report. Implies --local.

--federation
Generate a report for the federation if a member of one.

-h, --help
Print a help message describing the usage of sreport.

--local
Generate a report for the local cluster, even if part of a fed-
eration. Overrides --federation.

-n, --noheader
Don't display header when listing results.

-p, --parsable
Output will be '|' delimited with a '|' at the end.

-P, --parsable2
Output will be '|' delimited without a '|' at the end.

-Q, --quiet
Print no warning or informational messages, only error messages.

-t <time_format>
Specify the output time format. Time format options are case in-
sensitive and may be abbreviated. The default format is Minutes.
Supported time format options are listed in the time command
section below.

-T, --tres=<tres_names>
Trackable resource (TRES) to report values for. By default CPU
resource use is reported (except for reservation reports. All
TRES types reserved by a reservation will be shown by default
unless overridden with this option). Multiple TRES names may be
separated using a comma separated list for all reports except
the job reports, which can only support a single TRES name, or
"ALL" for all TRES.

The "Reported" Billing TRES is calculated from the largest
Billing TRES of each node multiplied by the time frame. For ex-
ample, if a node is part of multiple partitions and each has a
different TRESBillingWeights defined the Billing TRES for the
node will be the highest of the partitions. If TRESBilling-
Weights is not defined on any partition for a node then the
Billing TRES will be equal to the number of CPUs on the node.

TRES node usage is no longer reported in percent format or in
Cluster Utilization. Please use TRES CPU instead. The main is-
sue with using node is in most configurations multiple jobs are
able to run on the same node. This makes TRES node accounting
count the same node multiple times in the same period. In exclu-
sive node configurations, CPU accounting returns the same usage
node accounting would.

-v, --verbose
Print detailed event logging.

-V , --version
Print version information and exit.

COMMANDS
<keyword> may be omitted from the execute line and sreport will execute
in interactive mode. sreport will process commands as entered until ex-
plicitly terminated.

exit Terminate the execution of sreport. Identical to the quit com-
mand.

help Display a description of sreport options and commands.

nonparsable
Return output to normal after parsable or parsable2 has been
set.

parsable
Output will be | delimited with an ending '|'.

parsable2
Output will be | delimited without an ending '|'.

quiet Print no warning or informational messages, only fatal error
messages.

quit Terminate the execution of sreport. Identical to the exit com-
mand.

time <time_format>
Specify the output time format. Time format options are case in-
sensitive and may be abbreviated. The default format is Minutes.
Supported time format options include:

SecPer Seconds/Percentage of Total

MinPer Minutes/Percentage of Total

HourPer Hours/Percentage of Total

Seconds Seconds

Minutes Minutes

Hours Hours

Percent Percentage of Total

verbose
Enable detailed event logging.

version
Display the sreport version number.

!! Repeat the last command executed.

REPORT TYPES
Valid report types are:

cluster <REPORT> <OPTIONS>

job <REPORT> <OPTIONS>

reservation <REPORT> <OPTIONS>

user <REPORT> <OPTIONS>

<REPORT> options for each type include:

cluster
AccountUtilizationByUser, UserUtilizationByAccount,
UserUtilizationByWckey, Utilization, WCKeyUtilization-
ByUser

job SizesByAccount, SizesByAccountAndWcKey, SizesByWckey

reservation
Utilization

user TopUsage

NOTE: If OverSubscribe is configured to FORCE or YES in your slurm.conf
and the system is not configured to use preemption (PreemptMode=OFF)
accounting can easily grow to values greater than the actual utiliza-
tion. It may be common on such systems to get error messages in the
slurmdbd log stating: "We have more allocated time than is possible."

REPORT DESCRIPTION
cluster AccountUtilizationByUser
This report will display account utilization as it appears on
the hierarchical tree. Starting with the specified account or
the root account by default this report will list the underlying
usage with a sum on each level. Use the 'tree' option to span
the tree for better visibility.

NOTE: Idle reservation time will be split evenly among ac-
counts/users given access to it. When a reservation is assigned
to whole accounts, the time will be counted in the association
for the accounts, not the user associations in the accounts. In
this case, the usage of a parent account can be larger than the
sum of its children.

cluster UserUtilizationByAccount
This report will display users by account in order of utiliza-
tion without grouping multiple accounts by user into one, but
displaying them on separate lines.

cluster UserUtilizationByWCKey
This report will display users by wckey in order of utilization
without grouping multiple wckey by user into one, but displaying
them on separate lines.

cluster Utilization
This report will display total usage divided amongst Allocated,
Down, Planned Down, Idle, and Planned time for selected clus-
ters.

Allocated

Time that nodes were in use with active jobs or an
active reservation. This does not include reser-
vations created with the MAINT or IGNORE_JOBS
flags.

Down

Time that nodes were marked as Down or fully
Drained, or time that slurmctld was not responding
(assuming TrackSlurmctldDown is set in slur-
mdbd.conf).

Idle

Time that nodes were not Allocated, Down, Planned-
Down, or Planned.

OverCommitted

Time of eligible jobs waiting in the queue over
the Planned time. Unlike Planned, this has no
limit. It is typically useful to determine whether
your system is overloaded and by how much.

PlannedDown

Time that nodes were in use by a reservation cre-
ated with the MAINT flag but not the IGNORE_JOBS
flag. Also, time that nodes were in the FUTURE or
POWERED_DOWN state.

Planned

Time that nodes were not Allocated, Down or
PlannedDown with eligible jobs in the queue that
were unable to start due to time or size con-
straints. The maximum time is limited to the
amount of time possible on the system. If this
value is not of importance for you then the number
can be grouped with idle time.

TresCount

Configured number of TRESs on the reported nodes.
See also the TresName field.

Note: Reservations created with the IGNORE_JOBS flag are not
tracked in the Cluster Utilization report due to the fact that
allowing any current/active jobs to continue to run in the
reservation introduces the possibility for them to be accounted
for incorrectly. The jobs in these reservations will be tracked
as normal rather than being bundled in the reservation time, as
they are with reservations that do not have the IGNORE_JOBS
flag.

Note: The default view for the "Cluster Utilization" report in-
cludes the following fields: Cluster, Allocated, Down, Planned-
Down, Idle, Planned, Reported. You can include additional fields
like OverCommitted and TresCount fields with the Format option.
The TresName will also be included if using the -T, --tres
<tres_names> option.

cluster WCKeyUtilizationByUser
This report will display wckey utilization sorted by WCKey name
for each user on each cluster.

job SizesByAccount
This report will display the amount of time used for job ranges
specified by the 'grouping=' option. Only a single level in the
tree is displayed defaulting to the root dir. If you specify
other accounts with the 'account=' option sreport will use those
accounts as the root account and you will receive the aggregated
totals of each listed account plus their sub accounts.

job SizesByAccountAndWckey
This report is very similar to SizesByAccount with the differ-
ence being each account is pair with wckeys so the identifier is
account:wckey instead of just account so there will most likely
be multiple accounts listed depending on the number of wckeys
used.

job SizesByWckey
This report will display the amount of time for each wckey for
job ranges specified by the 'grouping=' option.

reservation Utilization
This report will display total usage for reservations on the
systems. Note: Time requests on this report will not truncate
the time the reservation used, only the reservations that ran at
any time during the period requested.

user TopUsage
Displays the top users on a cluster, i.e. users with the highest
usage. By default users are sorted by CPUTime, but the -T,
--tres option will sort users by the first TRES specified.

Use the group option to group accounts together. The default is
to have a different line for each user account combination.

Each report type has various options...

OPTIONS FOR ALL REPORT TYPES

All_Clusters
Use all monitored clusters. Default is local cluster.

Clusters=<OPT>
List of clusters to include in report. Default is local
cluster.

End=<OPT>
Period ending for report. Default is 23:59:59 of previous
day. Valid time formats are...

HH:MM[:SS] [AM|PM]
MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
MM/DD[/YY]-HH:MM[:SS]
YYYY-MM-DD[THH:MM[:SS]]
now[{+|-}count[seconds(default)|min-
utes|hours|days|weeks]]

Format=<OPT>
Comma separated list of fields to display in report.

When using the format option for listing various fields
you can put a %NUMBER afterwards to specify how many
characters should be printed.

e.g. format=name%30 will print 30 characters of field
name right justified. A -30 will print 30 characters left
justified.

Start=<OPT>
Period start for report. Default is 00:00:00 of previous
day. Valid time formats are...

HH:MM[:SS] [AM|PM]
MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
MM/DD[/YY]-HH:MM[:SS]
YYYY-MM-DD[THH:MM[:SS]]
now[{+|-}count[seconds(default)|min-
utes|hours|days|weeks]]

OPTIONS SPECIFICALLY FOR CLUSTER REPORTS

Accounts=<OPT>
When used with the UserUtilizationByAccount, or AccountU-
tilizationByUser, List of accounts to include in report.
Default is all.

Tree When used with the AccountUtilizationByUser report will
span the accounts as they are in the hierarchy.

Users=<OPT>
When used with any report other than Utilization, List of
users to include in report. Default is all.

Wckeys=<OPT>
When used with the UserUtilizationByWckey or WCKeyUti-
lizationByUser, List of wckeys to include in report. De-
fault is all.

OPTIONS SPECIFICALLY FOR JOB REPORTS

Accounts=<OPT>
List of accounts to use for the report. Default is all
which will show only one line corresponding to the totals
of all accounts in the hierarchy. This explanation does
not apply when ran with the FlatView or AcctAsParent op-
tions.

AcctAsParent
When used with the SizesbyAccount(*) will take specified
accounts as parents and the next layer of accounts under
those specified will be displayed. Default is root if no
specific Accounts are requested. When FlatView is used,
this option is ignored.

FlatView
When used with the SizesbyAccount(*) will not group ac-
counts in a hierarchical level, but print each account
where jobs ran on a separate line without any hierarchy.

GID=<OPT>
List of group ids to include in report. Default is all.

Grouping=<OPT>
Comma separated list of size groupings. (e.g. 50,100,150
would group job cpu count 1-49, 50-99, 100-149, > 150).
grouping=individual will result in a single column for
each job size found.

Jobs=<OPT>
List of jobs/steps to include in report. Default is all.

Nodes=<OPT>
Only show jobs that ran on these nodes. Default is all.

Partitions=<OPT>
List of partitions jobs ran on to include in report. De-
fault is all.

PrintJobCount
When used with the Sizes report will print number of jobs
ran instead of time used.

Users=<OPT>
List of users jobs to include in report. Default is all.

Wckeys=<OPT>
List of wckeys to use for the report. Default is all. The
SizesbyWckey report all users summed together. If you
want only certain users specify them with the Users= op-
tion.

OPTIONS SPECIFICALLY FOR RESERVATION REPORTS

Names=<OPT>
List of reservations to use for the report. Default is
all.

Nodes=<OPT>
Only show reservations that used these nodes. Default is
all.

OPTIONS SPECIFICALLY FOR USER REPORTS

Accounts=<OPT>
List of accounts to use for the report. Default is all.

Group Group all accounts together for each user. Default is a
separate entry for each user and account reference.

TopCount=<OPT>
Used in the TopUsage report. Change the number of users
displayed. Default is 10.

Users=<OPT>
List of users jobs to include in report. Default is all.

FORMAT OPTIONS FOR EACH REPORT
FORMAT OPTIONS FOR CLUSTER REPORTS

AccountUtilizationByUser
Accounts, Cluster, Login, Proper, TresCount, Used

UserUtilizationByAccount
Accounts, Cluster, Login, Proper, TresCount, Used

UserUtilizationByWckey
Cluster, Login, Proper, TresCount, Used, Wckey

Utilization
Allocated, Cluster, Down, Idle, OverCommitted, Planned-
Down, Reported, Planned, TresCount, TresName

WCKeyUtilizationByUser
Cluster, Login, Proper, TresCount, Used, Wckey

FORMAT OPTIONS FOR JOB REPORTS

SizesByAccount
Account, Cluster

SizesByAccountAndWckey
Account, Cluster

SizesByWckey
Wckey, Cluster

FORMAT OPTIONS FOR RESERVATION REPORTS

Utilization
Allocated, Associations, Cluster, End, Flags, Idle, Name,
Nodes, ReservationId, Start, TotalTime, TresCount, Tres-
Name, TresTime

FORMAT OPTIONS FOR USER REPORTS

TopUsage
Account, Cluster, Login, Proper, Used

All commands and options are case-insensitive.

PERFORMANCE
Executing sreport sends a remote procedure call to slurmdbd. If enough
calls from sreport or other Slurm client commands that send remote pro-
cedure calls to the slurmdbd daemon come in at once, it can result in a
degradation of performance of the slurmdbd daemon, possibly resulting
in a denial of service.

Do not run sreport or other Slurm client commands that send remote pro-
cedure calls to slurmdbd from loops in shell scripts or other programs.
Ensure that programs limit calls to sreport to the minimum necessary
for the information you are trying to gather.

ENVIRONMENT VARIABLES
Some sreport options may be set via environment variables. These envi-
ronment variables, along with their corresponding options, are listed
below. (Note: Command line options will always override these set-
tings.)

SREPORT_CLUSTER Same as -M, --cluster

SREPORT_FEDERATION Same as --federation

SREPORT_LOCAL Same as --local

SREPORT_TRES Same as -t, --tres

SLURM_CONF The location of the Slurm configuration file.

EXAMPLES
Report number of jobs per account according to different job size bins:

$ sreport job sizesbyaccount

Report cluster utilization:

$ sreport cluster utilization

Report top usage:

$ sreport user top

Report number of jobs by user gore1 within the environ account:

$ sreport job sizesbyaccount All_Clusters users=gore1 account=environ PrintJobCount

Report cluster account utilization with the specified fields during the
specified 24 hour day of February 23, 2009, by user gore1:

$ sreport cluster AccountUtilizationByUser cluster=zeus user=gore1 start=2/23/09 end=2/24/09 format=Accounts,Cluster,TresCount,Login,Proper,Used

Report cluster account utilization by user in the LC account on cluster
zeus:

$ sreport cluster AccountUtilizationByUser cluster=zeus accounts=lc start=2/23/09 end=2/24/09

Report top usage in percent of the lc account during the specified
week:

$ sreport user topusage start=2/16/09 end=2/23/09 -t percent account=lc

COPYING
Copyright (C) 2009-2010 Lawrence Livermore National Security. Produced
at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
Copyright (C) 2010-2022 SchedMD LLC.

This file is part of Slurm, a resource management program. For de-
tails, see <https://slurm.schedmd.com/>.

Slurm is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your op-
tion) any later version.

Slurm is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages