FreeBSD Manual Pages
tin(5) Usenet newsreader tin(5) NAME tin, rtin - related files DESCRIPTION This man page describes the various (config) files and their formats used by the tin(1) newsreader. All files are expected to have unix style ('\n' aka LF) line endings. FILES $MAILCAPS ~/.mailcap /etc/mailcap /usr/etc/mailcap /usr/local/etc/mailcap /etc/mail/mailcap mailcap(5) files as defined in RFC1524. The mailcap files are read by tin(1) to determine how to display non-text messages at the local site. Any line that starts with "#" is a comment. Blank lines are ignored. Otherwise, each line defines a single mailcap entry for a single content type. Long lines may be con- tinued by ending them with a backslash character, "\". Each individual mailcap entry consists of a content-type speci- fication, a command to execute, and (possibly) a set of optional "flag" values. The "type" field is simply any legal content type name. It is the string that will be matched against the ''Content-Type:'' header to decide if this is the mailcap entry that matches the current message. Additionally, the type field may specify a sub- type or a wildcard to match all subtypes. The "command" field is any UNIX command and is used to specify the interpreter for the given type of message. It will be passed to the shell via the system(3) facility. Semicolons and backslashes within the command or any flag field must be quoted with backslashes. If the field contains "%s", those two characters will be replaced by the name of a file that contains the body of the message. If it contains "%t", those two characters will be replaced by the content-type field, including the subtype, if any. If it contains "%{" followed by a parameter name and a closing "}", then all those characters will be re- placed by the value of the named parameter, if any, from the ''Content-Type:'' header. Finally, if the field contains "\%", those two characters will be replaced by a single "%" character. Besides the type and command field the following "flags" are de- fined: compose The "compose" field may be used to specify a program that can be used to compose a new body or body part in the given format. Its intended use is to support mail compos- ing agents that support the composition of multiple types of mail using external composing agents. As with the view-command, the semantics of program execution are op- erating system dependent. The result of the composing program may be data that is not yet suitable for mail transport -- that is, a Content-Transfer-Encoding may need to be applied to the data. composetyped The "composetyped" field is similar to the "compose" field, but is to be used when the composing program needs to specify the ''Content-Type:'' header field to be ap- plied to the composed data. The "compose" field is sim- pler, and is preferred for use with existing (non-mail- oriented) programs for composing data in a given format. The "composetyped" field is necessary when the Con- tent-Type information must include auxiliary parameters, and the composition program must then know enough about mail formats to produce output that includes the mail type information. edit The "edit" field may be used to specify a program that can be used to edit a body or body part in the given for- mat. In many cases, it may be identical in content to the "compose" field, and shares the operating-system depen- dent semantics for program execution. print The "print" field may be used to specify a program that can be used to print a message or body part in the given format. As with the view-command, the semantics of pro- gram execution are operating system dependent. test The "test" field may be used to test some external condi- tion (e.g., the machine architecture, or the window sys- tem in use) to determine whether or not the mailcap line applies. It specifies a program to be run to test some condition. The semantics of execution and of the value returned by the test program are operating system depen- dent. If the test fails, a subsequent mailcap entry should be sought. Multiple test fields are not permitted -- since a test can call a program, it can already be ar- bitrarily complex. needsterminal The "needsterminal" field indicates that the view-command must be run on an interactive terminal. This is needed to inform window-oriented user agents that an interactive terminal is needed. (The decision is not left exclusively to the view-command because in some circumstances it may not be possible for such programs to tell whether or not they are on interactive terminals.) The needsterminal command should be assumed to apply to the compose and edit commands, too, if they exist. Note that this is NOT a test - it is a requirement for the environment in which the program will be executed, and should typically cause the creation of a terminal window when not executed on either a real terminal or a terminal window. copiousoutput The "copiousoutput" field indicates that the output from the view-command will be an extended stream of output, and is to be interpreted as advice to the UA (User Agent mail-reading program) that the output should be either paged or made scroll-able. Note that it is probably a mistake if needsterminal and copiousoutput are both spec- ified. description The "description" field simply provides a textual de- scription, optionally quoted, that describes the type of data, to be used optionally by mail readers that wish to describe the data before offering to display it. textualnewlines The "textualnewlines" field, if set to any non-zero value, indicates that this type of data is line-oriented and that, if encoded in base64, all newlines should be converted to canonical form (CRLF) before encoding, and will be in that form after decoding. In general, this field is needed only if there is line-oriented data of some type other than text/* or non-line- oriented data that is a subtype of text. x11-bitmap The "x11-bitmap" field names a file, in X11 bitmap (xbm) format, which points to an appropriate icon to be used to visually denote the presence of this kind of data. nametemplate The "nametemplate" field gives a filename format, in which %s will be replaced by a short unique string to give the name of the temporary file to be passed to the viewing command. This is only expected to be relevant in environments where filename extensions are meaningful, e.g., one could specify that a GIF file being passed to a gif viewer should have a name ending in ".gif" by using "nametemplate=%s.gif" tin(1) currently only respects the "test", "description", "name- template" and partly the "needsterminal" flags, all other flags are internally ignored. It also can't handle the "%F" and "%n" expansions yet. Example: # mailcap file example image/*;\ xv -8 -geometry +0 '%s';\ description=%{name} %t-Image;\ test=test "$DISPLAY" != "";\ nametemplate=%s.IMAGE message/rfc822;\ ${PAGER:-"more"} '%s';\ edit=${EDITOR:-"vi"} '%s';\ compose=${EDITOR:-"vi"} '%s';\ print=a2ps '%s';\ needsterminal /usr/local/etc/nntpserver default NNTP-server to read news from if not reading from the local spool. '-g server', $NNTPSERVER have higher priority (in that order), the default server given at compile time has lower priority. ${TIN_HOMEDIR:-"$HOME"}/.cancelsecret secret to be used for cancel-locks if tin(1) is built with sup- port for it. An empty secret file disables the cancel-lock cre- ation in that case. This file should be readable only by the user. ${TIN_HOMEDIR:-"$HOME"}/.mime.types /usr/local/etc/mime.types /etc/tin/mime.types mime type / filename extension pairs ${TIN_HOMEDIR:-"$HOME"}/.newsauth "nntpserver[:port] password [user]" pairs for NNTP servers that require authorization. If the password contains a space or a tab it must be enclosed in double quotes ("). Usernames must not be enclosed in double quotes and thus can't contain spaces or tabs. Any line that starts with "#" is a comment. Blank lines are ig- nored. This file should be readable only for the user as it con- tains the user's unencrypted password for reading news! nntpserver full qualified domain name of the news server. Addition- ally, a port can be specified by appending :portnumber. password user's unencrypted password for reading news. user username on the news server if it differs from the local login. This field is optional. Example: # sample .newsauth file news.example.org secret news.example.net arcane guest news.example.com "top secret" james.bond@example.com ${TIN_HOMEDIR:-"$HOME"}/.newsrc "newsgroupflag [article[,article | -article]...]" lines. newsgroup the name of the newsgroup. flag a flag indicating if the group is subscribed ':' or not '!'. article range of already read articles from that group; numbers separated by commas with sequential numbers collapsed with hyphens. Empty lines and lines which start with "#" are ignored and not written back. Example: # sample .newsrc file news.software.b! 1-666,669 news.software.nntp: 1-13245,13247,13249 news.software.readers: 1-19567,19571-19597 ${TIN_HOMEDIR:-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/.oldnewsrc backup of ${TIN_HOMEDIR:-"$HOME"}/.newsrc ${TIN_HOMEDIR:-"$HOME"}/.signature ${TIN_HOMEDIR:-"$HOME"}/.Sig signature ${TIN_HOMEDIR:-"$HOME"}/.sigfixed fixed part of a randomly generated signature, this will be added first ${TIN_HOMEDIR:-"$HOME"}/.tin/.inputhistory history of last used strings ${TIN_INDEX_MAILDIR:-"${TIN_HOMEDIR:-"$HOME"}/.tin"}/.mail/ mailgroups index files ${TIN_INDEX_NEWSDIR:-"${TIN_HOMEDIR:-"$HOME"}/.tin"}/.news${NNTPSERVER:+"-$NNTPSERVER"}/ newsgroups index files ${TIN_INDEX_SAVEDIR:-"${TIN_HOMEDIR:-"$HOME"}/.tin"}/.save/ saved newsgroups index files ${TIN_HOMEDIR:-"$HOME"}/.tin/active.mail active file ("mailgroupname maxnum minnum mailspool" quadruples) of user's mailgroups (requires tin(1) to be built with mh-mail- handling support). mailgroupname must be the pathname of the mailbox relative to field #4 with '/' changed to '.' maxnum just put a large number here, something higher than the highest message in the mailbox minnum put 0 here mailspool path of mail spool directory. This must be the full path- name to the root of the mail folder area. Example: Mail.inbox 12345 00000 /home/foo Mail.outbox 23456 00000 /home/foo This allows access to the 'inbox' and 'outbox' folders of user foo. They are accessed via /home/foo/Mail/inbox and /home/foo/Mail/outbox ${TIN_HOMEDIR:-"$HOME"}/.tin/active.save active file of user's saved newsgroups, used by tin -R. /etc/tin/attributes ${TIN_HOMEDIR:-"$HOME"}/.tin/attributes The group attributes files may be used to override some global settings from ${TIN_HOMEDIR:-"$HOME"}/.tin/tinrc on a per group basis. Order is important as last match counts; this allows one to refine attributes for narrowed scopes. Note that the scope=<grouplist> line has to be specified before the attributes are specified for that list and each attribute can only be set once per scope section. All attributes are set to a reasonable default so you only have to specify the attribute that you want to change. All toggle attributes are set by specifying ON/OFF. Otherwise, they function exactly as their global equivalents. The following group attributes are available: scope This changes the list of groups to which the attributes that follow will be applied. See the section NEWSGROUP LISTS & WILDCARDS in tin(1) for the types of pattern that can be used here. add_posted_to_filter Identical to the tinrc variable of the same name advertising Identical to the tinrc variable of the same name alternative_handling Identical to the tinrc variable of the same name ask_for_metamail Identical to the tinrc variable of the same name auto_cc_bcc Identical to the tinrc variable of the same name auto_list_thread Identical to the tinrc variable of the same name auto_select Automatically perform the GroupMarkUnselArtRead ('X') command after entering the group. batch_save Can be used to override the global setting in tinrc on a per group basis. For more information read section AUTO- MATIC MAILING AND SAVING NEW NEWS in tin(1). date_format Identical to the tinrc variable of the same name delete_tmp_files If this is set to ON, then saved article files that have been post-processed will be automatically deleted, other- wise the user will be asked whether to delete the post- processed files. Automatic processing of marked articles using GroupAutoSave ('S') will suppress prompting. editor_format Identical to the tinrc variable of the same name extquote_handling Identical to the tinrc variable of the same name fcc Mailbox to save sent mails. The format of the mailbox is controlled via the tinrc mailbox_format variable. followup_to Set ''Followup-To:'' header to the specified group(s). from Identical to the tinrc variable mail_address group_catchup_on_exit Identical to the tinrc variable of the same name group_format Identical to the tinrc variable of the same name mail_8bit_header Identical to the tinrc variable of the same name mail_mime_encoding Identical to the tinrc variable of the same name maildir Identical to the tinrc variable of the same name mailing_list Used when a group is a mailing list. All responses to the group will be directed to this email address instead mark_ignore_tags Identical to the tinrc variable of the same name mark_saved_read Identical to the tinrc variable of the same name mime_forward Determines whether usenet articles are forwarded as at- tachment or inline. When set to OFF, the forwarded arti- cle will be included in the body of the mail, while set- ting this variable to ON will cause the article to be at- tached as a separate MIME part. Enabling mime_forward is particularly useful for articles consisting of multiple MIME parts such as PGP/MIME signed messages or being en- coded in a different character set than your local one. It is also useful if the receiver should be able to oper- ate on the entire forwarded article (i.e., view or save it without your comments). On the other hand, if you want to forward only some parts of the article or to insert 'inline' annotations, you might want to disable this op- tion. Currently mime_forward is forced if the article to be attached is a multipart MIME article, this may change in a future version. Please note that for this option to have effect, the tinrc variable interactive_mailer has to be set to 0 (which is the default). mime_types_to_save A comma separated list of MIME major/minor Content-Types that will be saved when using the view/save and save/au- tosave features. A single * can be used to wildcard the major and/or minor type and a ! as the first character in an entry will negate it, eg: image/*,!im- age/bmp,!text/html. Default is */* news_headers_to_display Identical to the tinrc variable of the same name news_headers_to_not_display Identical to the tinrc variable of the same name news_quote_format Identical to the tinrc variable of the same name organization This can be used to set the article header field ''Orga- nization:''. It overrides the setting (if any) of organi- zation in /etc/tin/tin.defaults and $ORGANIZATION (or $NEWSORG on Apollo DomainOS). If it points to a readable file a random line from that file will be used. Note that some news servers might still overwrite the ''Organiza- tion:'' header. pos_first_unread Identical to the tinrc variable of the same name post_8bit_header Identical to the tinrc variable of the same name post_mime_encoding Identical to the tinrc variable of the same name post_process_type Identical to the tinrc variable of the same name post_process_view Identical to the tinrc variable of the same name print_header Identical to the tinrc variable of the same name process_only_unread Identical to the tinrc variable of the same name prompt_followupto Identical to the tinrc variable of the same name quote_chars Identical to the tinrc variable of the same name savedir Identical to the tinrc variable of the same name savefile show_art_score Identical to the tinrc variable of the same name show_author Identical to the tinrc variable of the same name show_only_unread_arts Identical to the tinrc variable of the same name show_signatures Identical to the tinrc variable of the same name sigdashes Identical to the tinrc variable of the same name sigfile Identical to the tinrc variable of the same name signature_repost Identical to the tinrc variable of the same name sort_article_type Identical to the tinrc variable sort_article_type sort_threads_type Identical to the tinrc variable of the same name tex2iso_conv Identical to the tinrc variable of the same name thread_articles Identical to the tinrc variable of the same name thread_catchup_on_exit Identical to the tinrc variable of the same name thread_format Identical to the tinrc variable of the same name thread_perc Identical to the tinrc variable of the same name trim_article_body Identical to the tinrc variable of the same name suppress_soft_hyphens Identical to the tinrc variable of the same name verbatim_handling Identical to the tinrc variable of the same name wrap_on_next_unread Identical to the tinrc variable of the same name x_body A piece of text that will be added at the start of a mes- sage body. If this string starts with a / or ~ then it is assumed to be the name of a file containing the text to insert. If the string starts with a ! then what follows is assumed to be the path to a program to be executed to generate the content. %G is expanded to the current news.group.name and %P is expanded to the news.group.name with all '.' replaced by '/'. x_comment_to Insert ''X-Comment-To:'' header, this is only useful in FIDO groups. x_headers A string including header-name and the contents of the header that will be automatically added when posting. If the string starts with a / or ~ then it is assumed to be the name of a file containing the header and its content to be inserted. If the string starts with a ! then what follows is assumed to be the path to a program to be exe- cuted to generate the header and its content. %G is ex- panded to the current news.group.name and %P is expanded to the news.group.name with all '.' replaced by '/'. quick_kill_scope A comma-separated list of newsgroup patterns (wildmat- style) to which groups the filter rule added by QuickFil- terKill will be applied. If unset the default from the tinrc variable default_filter_kill_global will be used. quick_kill_expire Identical to the tinrc variable default_filter_kill_ex- pire quick_kill_case Identical to the tinrc variable default_filter_kill_case quick_kill_header Identical to the tinrc variable default_fil- ter_kill_header quick_select_scope A comma-separated list of newsgroup patterns (wildmat- style) to which groups the filter rule added by QuickFil- terSelect will be applied. If unset the default from the tinrc variable default_filter_select_global will be used. quick_select_expire Identical to the tinrc variable default_filter_select_ex- pire quick_select_case Identical to the tinrc variable default_filter_se- lect_case quick_select_header Identical to the tinrc variable default_filter_se- lect_header ispell Path and options for ispell(1)-like spell-checker, e.g., "aspell --mode=email --dont-backup check" mm_network_charset Identical to the tinrc variable of the same name undeclared_charset Assume (broken) articles without MIME charset declaration have this charset -- default is US-ASCII. This attribute works only on systems with working iconv(3) or ucnv_*(), others might have to compile tin(1) with --dis- able-mime-strict-charset. undeclared_cs_guess Guess charset for (broken) articles without MIME charset declaration. This attribute works only on systems with working iconv(3) or ucnv_*() and ucsdet_getName() from libicui18n. It has no effect if undeclared_charset is also set. Example: # include extra headers # assume ISO-8859-1 as charset if no charset is declared # in all but fido7.* groups scope=*,!fido7.* x_headers=~/.tin/headers undeclared_charset=ISO-8859-1 # in *sources* set post process type to shar only scope=*sources* post_process_type=1 # in *binaries* turn on full post processing, # remove tmp files and set Followup-To: poster scope=*binaries* post_process_type=2 delete_tmp_files=ON followup_to=poster # in fido.* newsgroups change quote_chars # and add X-Comment-To: line scope=fido.* quote_chars=%I>_ x_comment_to=ON # in fido7.* newsgroups guess charset scope=fido7.* undeclared_cs_guess=ON # in *.test newsgroups, don't append signature # and preset Subject scope=*.test sigfile=--none x_headers=Subject: test - ignore - no reply # assume ISO-2022-JP-2 as charset scope=fj.*,japan.* undeclared_charset=ISO-2022-JP-2 ${TIN_HOMEDIR:-"$HOME"}/.tin/filter The filter file is used to assign scores to certain articles. Based on the score an article can be filtered out (hidden) or marked hot. Empty lines or lines beginning with a '#' are ig- nored. Multiple matching-rules in the same scope are all applied individually and not only when they all hit at the same time (logical OR not AND). comment Every entry (rule) in the filter file might get a com- ment. Multiple lines are allowed (but only for comments yet). Every line must start with the "comment=" keyword. Comments must appear first in the rule. Comment lines placed within a rule will be moved to the begin of the next rule. This might be changed in the future. Don't use '#' to mark comments as those lines are ignored and your comments will get lost on the next write of the file. group A comma-separated list of newsgroup patterns in wildmat- style to which groups the filter rule will be applied. This line is mandatory! case 0=case-sensitive, 1=case-insensitive score Score value of the rule; can also be one of the magic words "kill" or "hot". subj Match against ''Subject:''. The matching type used (wild- mat or regex) depends on the setting of the tinrc vari- able wildcard. from Match against ''From:''. tin(1) converts the contents of the ''From:'' header to an old style e-mail address, e.g., ''some@body.example (John Doe)'' instead of ''John Doe <some@body.example>'', before trying to match the patterns in the filter rule. The matching type used (wildmat or regex) depends on the setting of the tinrc variable wildcard. msgid Match against ''Message-ID:'' and full ''References:''. The matching type used (wildmat or regex) depends on the setting of the tinrc variable wildcard. msgid_last Match against ''Message-ID:'' and last ''References:'' entry (direct responses) only. The matching type used (wildmat or regex) depends on the setting of the tinrc variable wildcard. msgid_only Match against ''Message-ID:''. The matching type used (wildmat or regex) depends on the setting of the tinrc variable wildcard. refs_only Match against ''References:''. The matching type used (wildmat or regex) depends on the setting of the tinrc variable wildcard. lines Match against ''Lines:'', <num matches less than, >num matches more than. gnksa Match against ''From:'' address parser return codes. <num matches less than, >num matches more than the returned numeric value. GNKSA_LOCAL_DOMAIN_LITERAL or GNKSA_IN- VALID_DOMAIN are only returned if disable_gnksa_do- main_check is set to false. As the built in domain list is outdated this should be considered carefully. 0 GNKSA_OK 1 GNKSA_INTERNAL_ERROR 100 GNKSA_LANGLE_MISSING 101 GNKSA_LPAREN_MISSING 102 GNKSA_RPAREN_MISSING 103 GNKSA_ATSIGN_MISSING 104 GNKSA_RANGLE_MISSING 200 GNKSA_SINGLE_DOMAIN 201 GNKSA_INVALID_DOMAIN 202 GNKSA_ILLEGAL_DOMAIN 203 GNKSA_UNKNOWN_DOMAIN 204 GNKSA_INVALID_FQDN_CHAR 205 GNKSA_ZERO_LENGTH_LABEL 206 GNKSA_ILLEGAL_LABEL_LENGTH 207 GNKSA_ILLEGAL_LABEL_HYPHEN 208 GNKSA_ILLEGAL_LABEL_BEGNUM 209 GNKSA_BAD_DOMAIN_LITERAL 210 GNKSA_LOCAL_DOMAIN_LITERAL 211 GNKSA_RBRACKET_MISSING 300 GNKSA_LOCALPART_MISSING 301 GNKSA_INVALID_LOCALPART 302 GNKSA_ZERO_LENGTH_LOCAL_WORD 400 GNKSA_ILLEGAL_UNQUOTED_CHAR 401 GNKSA_ILLEGAL_QUOTED_CHAR 402 GNKSA_ILLEGAL_ENCODED_CHAR 403 GNKSA_BAD_ENCODE_SYNTAX 404 GNKSA_ILLEGAL_PAREN_CHAR 405 GNKSA_INVALID_REALNAME 406 GNKSA_MISSING_REALNAME xref Match against ''Xref:'' line. Before any matching is done the line is turned into the same format ''Newsgroups:'' has that is it is turned into a comma separated newsgroup list with all other information (i.e., the article counter) removed. The matching type used (wildmat or regex) depends on the setting of the tinrc variable wild- card. path Match against ''Path:'' line. This may not work on some servers. The matching type used (wildmat or regex) de- pends on the setting of the tinrc variable wildcard. time time_t value when rule expires Example: comment=mark all articles about tin, rtin, comment=tind, ktin or cdtin as hot group=* case=1 score=hot subj=\b(cd|[rk]?)?tin(d|pre)?[-.0-9]*\b comment=downscore postings in nsr from google based on comment=message-id or path, if both hit they end up with comment=a score of -66 which is enough to mark them killed group=news.software.readers case=1 score=-33 path=\.googlegroups\.com!not-for-mail$ msgid_only=@googlegroups\.com> ${TIN_HOMEDIR:-"$HOME"}/.tin/keymap${${LC_ALL:-"${LC_MESSAGES:-"${LC_CTYPE:-"$LANG"}"}"}:+".${LC_ALL:-"${LC_MESSAGES:-"${LC_CTYPE:-"$LANG"}"}"}"} /etc/tin/keymap${${LC_ALL:-"${LC_MESSAGES:-"${LC_CTYPE:-"$LANG"}"}"}:+".${LC_ALL:-"${LC_MESSAGES:-"${LC_CTYPE:-"$LANG"}"}"}"} Keymap-file, containing "keyname value [value]" pairs separated by spaces or tabs. If the keymap-file named with full specified locale(5) is not found, less specific ones are looked for. Vari- ous parts will be stripped off the name, in the following order codeset, normalized codeset, territory and modifier when looking for the keymap-file. Below is a list of all rebindable keynames and their defaults. If a keyname is bound to NULL it is unas- signed. ShellEscape ! SetRange # LastPage $ ToggleColor & LastViewed - SearchRepeat \ SearchSubjF / SearchSubjB ? SearchAuthB A SearchBody B CatchupNextUnread C EditFilter E ToggleHelpDisplay H ToggleInverseVideo I ConnectionInfo J LookupMessage L OptionMenu M Postponed O ^O QuitTin Q BugReport R DisplayPostHist W MarkThrUnread Z FirstPage ^ SearchAuthF a Catchup c Help h ToggleInfoLastLine i Down j ^N Up k ^P Print o Quit q Version v Post w MarkArtUnread z QuickFilterSelect [ QuickFilterKill ] Pipe | ScrollUp < ScrollDown > PageUp b ^B ^U PageDown ^D ^F SPACE RedrawScr ^L Postponed ^O MenuFilterSelect ^A MenuFilterKill ^K MarkFeedRead ^X MarkFeedUnread ^W AttachSelect ^J ^M AttachPipe p AttachSave s AttachTag t AttachUntag U AttachTagPattern = AttachToggleTagged @ ConfigToggleAttrib TAB ConfigSelect ^J ^M ConfigLastPage G ConfigNoSave Q ConfigScopeMenu S ConfigFirstPage g ConfigResetAttrib r FeedTag T FeedArt a FeedHot h FeedPat p FeedRepost r FeedSupersede s FeedThd t FilterEdit e FilterSave s GroupNextUnreadArtOrGrp TAB GroupReadBasenote ^J ^M GroupSelThd * GroupDoAutoSel + GroupToggleThdSel . GroupSelThdIfUnreadSelected ; GroupSelPattern = GroupReverseSel @ GroupCancel D GroupToggleGetartLimit G GroupMarkThdRead K GroupNextUnreadArt N GroupPrevUnreadArt P GroupAutoSave S GroupTagParts T GroupUntag U GroupMarkUnselArtRead X GroupToggleSubjDisplay d GroupGoto g GroupListThd l GroupMail m GroupNextGroup n GroupPrevGroup p GroupToggleReadUnread r GroupSave s GroupTag t GroupToggleThreading u GroupRepost x GroupUndoSel ~ HelpLastPage G HelpFirstPage g PageReplyQuoteHeaders ^E PagePGPCheckArticle ^G PageToggleRaw ^H PageNextUnread TAB PageNextThd ^J ^M PageToggleTabs ^T PageFollowupQuoteHeaders ^W PageToggleTex2iso " PageToggleAllHeaders * PageArticleInfo ' PageToggleRot % PageToggleUue ( PageReveal ) PageSkipIncludedText : PageTopThd < PageBotThd > PageCancel D PageFollowup F PageLastPage G PageKillThd K PageNextUnreadArt N PagePrevUnreadArt P PageReply R PageAutoSave S PageGroupSel T PageViewUrl U PageViewAttach V PageToggleHighlight _ PageEditArticle e PageFollowupQuote f PageFirstPage g PageListThd l PageMail m PageNextArt n PagePrevArt p PageReplyQuote r PageSave s PageTag t PageGotoParent u PageRepost x PgpEncSign b PgpEncrypt e PgpIncludekey i PgpSign s PostAbort a PostContinue c PostCancel d PostEdit e PostPGP g PostIspell i PostIgnore i PostMail m PostPostpone o PostPost p y PostSupersede s PostSend s y PostedArticlesSelect ^J ^M PostponeOverride Y PostponeAll A PromptYes y Y PromptNo n N PProcNone n PProcShar s PProcYes y SaveAppendFile a SaveOverwriteFile o SelectEnterNextUnreadGrp TAB n SelectReadGrp ^J ^M SelectResetNewsrc ^R SelectSortActive . SelectNextUnreadGrp N SelectSubscribePat S SelectUnsubscribePat U SelectQuitNoWrite X SelectSyncWithActive Y SelectToggleDescriptions d SelectGoto g SelectMoveGrp m SelectToggleReadDisplay r SelectSubscribe s SelectUnsubscribe u SelectYankActive y SelectMarkGrpUnread z Z ScopeSelect ^J ^M ScopeEditAttributesFile E ScopeAdd a ScopeDelete d ScopeMove m ScopeRename r ThreadReadNextArtOrThread TAB ThreadReadArt ^J ^M ThreadSelArt * ThreadToggleArtSel . ThreadReverseSel @ ThreadCancel D ThreadFollowup F ThreadMarkArtRead K ThreadAutoSave S ThreadUntag U ThreadToggleSubjDisplay d ThreadFollowupQuote f ThreadMail m ThreadSave s ThreadTag t ThreadTagParts T ThreadUndoSel ~ UrlSelect ^J ^M ${TIN_HOMEDIR:-"$HOME"}/.tin/mailgroups This file provides short descriptions of each mailgroup. (re- quires tin(1) to be built with mh-mail-handling support). Each line consist of two tab-separated fields "mailgroupname one-line description". mailgroupname is the name of the newsgroup description is a short single-line description of the group ${TIN_HOMEDIR:-"$HOME"}/.tin/newsrctable "nntpserver[:port] newsrc [shortname [...]]" pairs to use with the ''-g'' command-line switch. The matching is case-insensitive and any line that starts with "#", ";" or " " is treated as a comment. This is only available if reading via NNTP. nntpserver full qualified domain name of the news server. Plain IPv6 address must be enclosed in square brackets. Addition- ally, a port can be specified by appending :portnumber. Be aware that if a port is given it will override any port given with ''-g'' or ''-p'' or implied by ''-T'' or ''-k'' or set via $NNTPPORT. The string "default" or "*" acts as wildcard to match any name, such a line should be placed last. newsrc related newsrc. A file specified via ''-f'' has a higher priority. shortname nickname(s) for the nntpserver. Nicknames must not con- tain ":" and must be unique. Example: # sample newsrctable file news.tin.org .newsrc-tin.org tinorg news.example.org /tmp/nrc-ex example ex [::1]:1119 /tmp/localhost6-1119 lh6 # catch all rules should go last # with the more specific one on top *:563 ~/.tin/newsrcs/${NNTPSERVER-localhost}:563/newsrc * ~/.tin/newsrcs/${NNTPSERVER-localhost}/newsrc ${TIN_HOMEDIR:-"$HOME"}/.tin/posted Posting history. The file is written by tin(1) and used by Dis- playPostHist ('W') command. It should not be altered manually. Any line that starts with "#" is a comment. Blank lines are ig- nored. All other lines shall consist of at least four pipe-sepa- rated fields, starting with a time stamp "dd-mm-yy", a single letter indicating the action which initiated the message, a group name or a mail address the message was sent to, the sub- ject of the message and optionally the messages ''Message-ID'' if known. ${TIN_HOMEDIR:-"$HOME"}/Mail/posted Copy of all posted articles in mbox(5) format. The filename can be changed by setting posted_articles_file. ${TIN_HOMEDIR:-"$HOME"}/.tin/postponed.articles Pool of postponed articles. This file is in mbox(5) format. ${TIN_HOMEDIR:-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/motd This file is a copy of the servers message of the day (MOTD) message. It is automatically created on startup except when us- ing the ''-Q'' command-line option and is unlinked on exit. ${TIN_HOMEDIR:-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/msglog File to store $NNTPSERVER and $NNTPPORT related info- and error- messages. The file is overwritten on startup and meant for de- bugging. ${TIN_HOMEDIR:-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/newsgroups This file is a copy of the servers newsgroups file which pro- vides short descriptions of each newsgroup. It is automatically updated on startup except when using the ''-X''or ''-q'' com- mand-line option and an old copy exists. Each line consist of two tab-separated fields "group.name one-line description". group.name is the name of the newsgroup one-line description is a short single-line description of the group ${TIN_HOMEDIR:-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/serverrc File to store $NNTPSERVER and $NNTPPORT related data via a list of "variable=value" pairs. Currently there are only a few vari- ables, all are not meant to be changed by the user. version Internal version number. motd_hash Internal hash of the servers MOTD, so displaying it can be skipped if it is unchanged. last_newnews Internal timestamp used by tin(1) to keep track of new newsgroups on the server. /etc/tin/tinrc ${TIN_HOMEDIR:-"$HOME"}/.tin/tinrc At startup, tin(1) reads in the configuration file. This con- tains a list of "variable=value" pairs that can be used to con- figure the way tin(1) works. value strings are limited to 1022 chars and will be discarded if exceeding this limit. If it ex- ists, the global configuration file, ${TIN_LIBDIR:-NEWSLIB- DIR}/tinrc is read first. After that, the user's own configura- tion file ${TIN_HOMEDIR:-"$HOME"}/.tin/tinrc is read. The global file is useful for distributing system-wide defaults to new users who have no private tinrc yet (see also /etc/tin/tin.de- faults). abbreviate_groupname If ON abbreviate long newsgroup names at group selection level and article level (if necessary) like this: news.software.readers -> n.software.readers -> n.s.read- ers -> n.s.r. Default is OFF. add_posted_to_filter If ON add posted articles which start a new thread to filter for highlighting follow-ups. Default is ON. advertising Turn ON advertising in header (''User-Agent:''). Default is ON. alternative_handling If ON strip multipart/alternative messages automatically. Default is ON. art_marked_deleted The character used to show that an article was deleted. Default is 'D'. art_marked_inrange The character used to show that an article is in a range. Default is '#'. art_marked_return The character used to show that an article will return as an unread article when the group is next entered. Default is '-'. art_marked_selected The character used to show that an article/thread is auto-selected (hot). Default is '*'. art_marked_recent The character used to show that an article/thread is re- cent (not older than X days). See also recent_time. De- fault is 'o'. art_marked_unread The character used to show that an article has not been read. Default is '+'. art_marked_read The character used to show that an article was read. De- fault is ' '. art_marked_killed The character used to show that an article was killed. Default is 'K'. kill_level must be set accordingly. art_marked_read_selected The character used to show that an article was hot before it was read. Default is ':'. kill_level must be set ac- cordingly. Ask before using MIME viewer (ask_for_metamail) If ON tin(1) will ask before using a MIME viewer (meta- mail_prog) to display MIME messages. This only occurs if a MIME viewer is set. Default is OFF. attachment_format Format string tin(1) uses for Attachment level represen- tation. Default is "%t%s%e%c%d". auto_cc_bcc Automatically put your name in the ''Cc:'' and/or ''Bcc:'' field when mailing an article. Default is No. auto_list_thread If ON automatically list thread when entering it using right arrow key. Default is ON. auto_reconnect Reconnect to server automatically. Default is OFF. batch_save If set ON articles/threads will be saved in batch mode when save ''-S'' or mail ''-M, -N'' is specified on the command line. Default is ON. beginner_level If set ON a mini menu of the most useful commands will be displayed at the bottom of the screen for each level. Also a short posting etiquette will be displayed after composing an article. Default is ON. cache_overview_files If ON, create local copies of NNTP overview files. This can be used to considerably speed up accessing large groups when using a slow connection. Default is OFF. compress_overview_files If ON, locally cached NNTP overview files (cache_overview_files) are saved in compressed form (RFC- 1952). Useful to reduce local disk space used. Default is OFF. cancel_lock_algo Use this hash algorithm for cancel-locks. Only available when built with cancel-lock support. none disables the generation of cancel-locks. Valid values are none, sha1, sha256 and sha512. Default is sha1. catchup_read_groups If set ON the user is asked when quitting if all groups read during the current session should be marked read. Default is OFF. col_back Standard background color col_extquote Color of quoted text from external sources col_from Color of sender (From:) col_head Color of header-lines col_help Color of help pages col_invers_bg Color of background for inverse text col_invers_fg Color of foreground for inverse text col_markdash Color of words emphasized like _this_. See also word_h_display_marks and word_highlight. col_markslash Color of words emphasized like /this/. See also word_h_display_marks and word_highlight. col_markstar Color of words emphasized like *this*. See also word_h_display_marks and word_highlight. col_markstroke Color of words emphasized like -this-. See also word_h_display_marks and word_highlight. col_message Color of status messages in last line col_minihelp Color of mini help menu col_newsheaders Color of actual news header fields col_normal Standard foreground color col_quote Color of quoted lines col_quote2 Color of twice quoted lines col_quote3 Color of >=3 times quoted lines col_response Color of response counter. This is the text that says "Response x of y" in the article viewer. col_signature Color of signatures col_score_neg Color of negative score col_score_pos Color of positive score col_urls Color of urls highlight col_verbatim Color of verbatim blocks col_subject Color of article subject col_text Color of text-lines col_title Color of help/mail sign confirm_choice tin(1) can ask for manual confirmation to protect the user. Available choices: commands: Ask for confirmation before executing cer- tain dangerous commands (e.g., Catchup ('c')). Com- mands that this affects are marked in this manual with '[after confirmation]'. quit: You'll be asked to confirm that you wish to exit tin(1) when you use the Quit ('q') command. select: Ask for confirmation before marking all not selected (with GroupMarkUnselArtRead ('X') command) articles as read. Default is commands & quit. date_format Format string used for date representation. A description of the different format options can be found at strftime(3). tin(1) uses strftime(3) when available and supports most format options in his fallback code. De- fault is "%a, %d %b %Y %H:%M:%S". default_art_search default_author_search default_config_search The last article/author/config option that was searched for. default_filter_days Default is 28. default_filter_kill_case Default for quick (1 key) kill filter case. ON = filter case sensitive, OFF = ignore case. Default is OFF. default_filter_kill_expire Default for quick (1 key) kill filter expire. ON = limit to default_filter_days, OFF = don't ever expire. Default is OFF. default_filter_kill_global Default for quick (1 key) kill filter global. ON=apply to all groups, OFF=apply to current group. Default is ON. default_filter_kill_header Default for quick (1 key) kill filter header. 0 ''Subject:'' (case sensitive) 1 ''Subject:'' (ignore case) 2 ''From:'' (case sensitive) 3 ''From:'' (ignore case) 4 ''Message-ID:'' & full ''References:'' line 5 ''Message-ID:'' & last ''References:'' entry only 6 ''Message-ID:'' entry only 7 ''Lines:'' default_filter_select_case Default for quick (1 key) auto-selection filter case. ON=filter case sensitive, OFF=ignore case. Default is OFF. default_filter_select_expire Default for quick (1 key) auto-selection filter expire. ON = limit to default_filter_days, OFF = don't ever ex- pire. Default is OFF. default_filter_select_global Default for quick (1 key) auto-selection filter global. ON=apply to all groups, OFF=apply to current group. De- fault is ON. default_filter_select_header Default for quick (1 key) auto-selection filter header. 0 ''Subject:'' (case sensitive) 1 ''Subject:'' (ignore case) 2 ''From:'' (case sensitive) 3 ''From:'' (ignore case) 4 ''Message-ID:'' & full ''References:'' line 5 ''Message-ID:'' & last ''References:'' entry only 6 ''Message-ID:'' entry only 7 ''Lines:'' default_goto_group default_group_search default_mail_address default_move_group default_pattern default_pipe_command default_post_newsgroups default_post_subject default_range_group default_range_select default_range_thread default_repost_group default_save_file default_save_mode default_select_pattern default_shell_command default_subject_search dont_break_words Do not break long lines inside a word. This applies to the body except for verbatim blocks. See also wrap_col- umn. Default is OFF. draw_arrow Allows groups/articles to be selected by an arrow '->' if set ON or by a highlighted bar if set OFF. Default is OFF. editor_format The format string used to create the editor start command with parameters. Default is '%E +%N %F' with %E=Editor, %N=Linenumber and %F=Filename (e.g., /bin/vi +7 .arti- cle). See also $VISUAL and $EDITOR under "ENVIRONMENT" in tin(1) extquote_handling If ON quotes from external sources will be detected. De- fault is OFF. extquote_regex A regular expression that will be applied when reading articles. All matching lines are shown in col_extquote. If extquote_regex is blank, then tin(1) uses a built-in default. force_screen_redraw Specifies whether a screen redraw should always be done after certain external commands. Default is OFF. getart_limit If getart_limit is > 0 not more than the last getart_limit articles/group are fetched from the server. If getart_limit is < 0 tin(1) will start fetching arti- cles from your first unread minus absolute value of getart_limit. Default is 0, which means no limit. goto_next_unread Which keys tin(1) should accept to jump to the next un- read article. Possible is any combination of PageDown and PageNextUnread. When PageDown is set tin(1) jumps to the next article at the end of the current one. When Pa- geNextUnread is set tin(1) jumps immediately to the next article when PageNextUnread ('<TAB>') is pressed. Default is PageNextUnread. group_catchup_on_exit If ON catchup group when leaving with the left arrow key. Default is ON. group_format The format string used for the Group level. Default is "%n %m %R %L %s %F". The following substitutions are supported: %D date %F from, name and/or address %I initials %L line count %M message-id %R number of responses in thread %S score %m article marks %n current thread number %s subject %% % hide_uue If set to 'No' then raw uuencoded data is displayed. If set to 'Yes' then sections of uuencoded data will be shown with a single tag line showing the size and file- name (much the same as a MIME attachment). If set to 'Hide all' then any line that looks like uuencoded data will be folded into a tag line. This is useful when uuen- coded data is split across more than one article but can also lead to false positives. This setting can also be toggled in the article viewer. Default is 'No'. inews_prog Path, name and options of external inews(1). If you are reading via NNTP the default value is "--internal" (use built-in NNTP inews), else it is "inews -h". The article is passed to inews_prog on STDIN via '< article'. info_in_last_line If ON, show current group description or article subject in the last line (not in the pager and global menu) -- ToggleInfoLastLine ('i') toggles setting. This facility is useful as the full width of the screen is available to display long subjects. Default is OFF. interactive_mailer If greater than 0 your mailreader will be invoked earlier for reply so you can use more of its features (e.g., MIME, pgp, ...). 1 means include headers, 2 means don't include headers (old use_mailreader_i=ON option). 0 turns off usage. This option has to suit mailer_format. Default is 0. inverse_okay If ON use inverse video for page headers and URL high- lighting. Default is ON. keep_dead_articles If ON keep all failed postings in ${TIN_HOME- DIR:-"$HOME"}/dead.articles besides keeping the last failed posting in ${TIN_HOMEDIR:-"$HOME"}/dead.article. Default is ON. kill_level This option controls the processing and display of arti- cles that are killed. There are 3 options, default is 0 (Kill only unread arts). 0 Kill only unread arts is the 'traditional' behavior of tin(1). Only unread articles are killed once only by marking them read. As filtering only hap- pens on unread articles with kill_level set to 0, art_marked_killed and art_marked_read_selected are only shown once. When you reenter the group the mark will be gone. 1 Kill all arts & show with K will process all arti- cles in the group and therefore there is a process- ing overhead when using this option. Killed arti- cles are threaded as normal but they will be marked with art_marked_killed. 2 Kill all arts and never show will process all arti- cles in the group and therefore there is a process- ing overhead when using this option. Killed arti- cles simply does not get displayed at all. mail_8bit_header Allows 8bit characters unencoded in the header of mail message. Default is OFF. Turning it ON is effective only if mail_mime_encoding is also set to 8bit. Leaving it OFF is safe for most users and compliant to Internet Mail Standard (RFC5322 and RFC2047). Default is OFF. mail_address User's mail address (and full name), if not user- name@host. This is used when creating articles, sending mail and when pgp(1) signing. mail_mime_encoding MIME encoding of the body in mail message, if necessary (8bit, base64, quoted-printable, 7bit). Default is quoted-printable. mail_quote_format Format of quote line when replying (via mail) to an arti- cle (%A=Address, %D=Date, %F=Fullname+Address, %G=Group- name, %M=Message-ID, %N=Fullname, %C=Firstname, %I=Ini- tials). If the article has multiple addresses only the first is evaluated. Default is "In article %M you wrote:" mailbox_format Select one of the following mailbox-formats: MBOXO (de- fault, except on SCO), MBOXRD or MMDF (default on SCO). See mbox(5) and RFC4155 for more details on MBOXO and MBOXRD and mmdf(5) for more details about MMDF. maildir The directory where articles/threads are to be saved in mbox(5) format. This feature is mainly for use with the mutt(1) mail program. It allows the user to save arti- cles/threads/groups simply by giving '=' as the filename to save to. Default is ${TIN_HOMEDIR:-"$HOME"}/Mail. mailer_format The format string used to create the mailer command with parameters that is used for mailing articles to other people. Default is '%M "%T" < %F' (e.g., /bin/mail "iain" < ~/.article). The flexible format allows other mailers with different command line parameters to be used such as sendmail -oem -t < %F mutt -H %F claws-mail --compose "mailto:%T?subject=%S&insert=%F" interactive_mailer must be set adequate. The following substitutions are supported: %F filename %M default_mailer %S subject-field %T to-filed %U username %% % mark_saved_read If ON mark articles that are saved as read. Default is ON. mark_ignore_tags When this is ON, the GroupMarkThdRead ('K'), Thread- MarkArtRead ('K'), MarkThdUnread ('Z') at Group level and MarkArtUnread ('z') at Thread level functions mark just the current article or thread, ignoring other tagged, (un)read articles. When OFF, the same function presents a menu with choices of the current thread or article, all tagged, unread articles, or nothing. metamail_prog Path, name and options of external metamail(1) program used to view non-textual parts of articles. To use the built-in viewer, set to --internal. This is the default value when metamail(1) is not installed. Leave it blank if you don't want any automatic viewing of non-textual attachments. The PageViewAttach ('V') command can always be used to manually view any attachments. See also ask_for_metamail. mm_charset Charset supported locally, which is also used for MIME header (charset parameter and charset name in header en- coding) in mail and news postings. If MIME_STRICT_CHARSET is defined at compile time, text in charset other than the value of this parameter is considered not displayable and represented as '?'. Otherwise, all character sets are regarded as compatible with the display. If it's not set, the value of the environment variable $MM_CHARSET is used. US-ASCII or compile-time default is used in case neither of them is defined. If your system supports iconv(3) or ucnv_*(), this option is disabled and you should use mm_network_charset instead. mm_network_charset Charset used for posting and MIME headers; replaces mm_charset. Conversion between mm_network_charset and local charset (determined via nl_langinfo(3)) is done via iconv(3) or ucnv_*(), if none of these functions are available on your system this option is disabled and you have to use mm_charset instead. mm_network_charset is limited to one of the following charsets: US-ASCII, ISO-8859-{1,2,3,4,5,7,9,10,13,14,15,16}, KOI8-{R,U,RU} EUC-{CN,JP,KR,TW}, ISO-2022-{CN,CN- EXT,JP,JP-1,JP-2}, Big5, UTF-8 Not all values might work on your system, see iconv_open(3) for more details. If it's not set, the value of the environment variable $MM_CHARSET is used. US-ASCII or compile-time default is used in case neither of them is defined. mono_markdash Character attribute of words emphasized like _this_. It depends on your terminal which attributes are usable. See also word_h_display_marks and word_highlight. mono_markslash Character attribute of words emphasized like /this/. It depends on your terminal which attributes are usable. See also word_h_display_marks and word_highlight. mono_markstar Character attribute of words emphasized like *this*. It depends on your terminal which attributes are usable. See also word_h_display_marks and word_highlight. mono_markstroke Character attribute of words emphasized like -this-. It depends on your terminal which attributes are usable. See also word_h_display_marks and word_highlight. newnews These are internal timers used by tin(1) to keep track of new newsgroups. Do not change them unless you understand what they are for. news_headers_to_display Which news headers you wish to see. If you want to see _all_ the headers, place an '*' as this value. This is the only way a wildcard can be used. If you enter 'X-' as the value, you will see all headers beginning with 'X-' (like X-Alan or X-Pape). You can list more than one by delimiting with spaces. Not defining anything turns off this option. news_headers_to_not_display Same as news_headers_to_display except it denotes the op- posite. An example of using both options might be if you thought 'X-' headers were A Good Thing(tm), but thought Alan and Pape were miscreants... well then you would do something like this: news_headers_to_display=X- news_headers_to_not_display=X-Alan X-Pape Not defining anything turns off this option. news_quote_format Format of quote line when posting/following up an article (%A=Address, %D=Date, %F=Fullname+Address, %G=Groupname, %M=Message-ID, %N=Fullname, %C=Firstname, %I=Initials). If the article has multiple addresses only the first is evaluated. Default is "%F wrote:". nntp_read_timeout_secs Time in seconds to wait for a response from the server. Default is 120. normalization_form The normalization form which should be used to normalize unicode input. The possible values are: 0 None: no normalization 1 NFKC: Compatibility Decomposition, followed by Canonical Composition 2 NFKD: Compatibility Decomposition 3 NFC: Canonical Decomposition, followed by Canonical Composition 4 NFD: Canonical Decomposition 5 NFKC_CF: Compatibility Decomposition, followed by Canonical Composition and Case Folding Some normalization modes are only available if they are sup- ported by the library tin(1) uses to do the normalization. NFC should be used if possible (RFC5198). page_mime_format Format string tin(1) uses for mime header at Page level. Default is "[-- %T%S%*n%z%*l%!c%!d%*e --]". page_uue_format Format string tin(1) uses for uue header at Page level. Default is "[-- %T%S%*n%I%!d%*e --]". pos_first_unread If ON put cursor at first unread article in group other- wise at last article. Default is ON. post_8bit_header Allows 8bit characters unencoded in the header of a news article, if set this also disables the generation of MIME-headers when they are usually required. Default is OFF. Only enacted if post_mime_encoding is also set to 8bit. In a number of local hierarchies where 8bit charac- ters are used, using unencoded (raw) 8bit characters in header is acceptable and sometimes even recommended so that you need to check the convention adopted in the lo- cal hierarchy of your interest to determine what to do with this and post_mime_encoding. post_mime_encoding MIME encoding of the body in news message, if necessary. (8bit, base64, quoted-printable, 7bit). Default is 8bit, which leads to no encoding. base64 and quoted-printable are usually undesired on usenet. post_process_view If ON, then tin(1) will start an appropriate viewer pro- gram to display any files that were post processed and uudecoded. The program is determined using the mailcap(5) file. Default is ON. post_process_type This specifies whether to perform post processing on saved articles. Because the shell archive may contain commands you may not want to be executed, be careful when extracting shell archives. The following values are al- lowed: 0 No (default), no post processing is done. 1 Shell archives, unpacking of multi-part shar(1) files only. 2 Yes, binary attachments and data will be decoded and saved. posted_articles_file Keep posted articles in given file. If the given filename does not contain any expandable strings it will be pre- fixed with ${TIN_HOMEDIR:-"$HOME"}/Mail/. If no filename is set then postings will not be saved. See the section "MAILING PIPING PRINTING REPOSTING AND SAVING ARTICLES" for more information about the various expansion charac- ters. Default is 'posted'. print_header If ON, then the full article header is sent to the printer. Otherwise only the ''Subject:'' and ''From:'' fields are output. Default is OFF. printer The printer program with options that is to be used to print articles. The default is lpr(1) for BSD machines and lp(1) for SysV machines. Printing from tin(1) may have been disabled by the System Administrator. process_only_unread If ON only save/print/pipe/mail unread articles (tagged articles excepted). Default is OFF. prompt_followupto If ON show empty ''Followup-To:'' header when editing an article. Default is OFF. quote_chars The character used in quoting included text to article followups and mail replies. The '_' character represents a blank character and is replaced with ' ' when read, %I is replaced by author's initials. If the article has mul- tiple addresses only the first is evaluated. Default is '>_'. quote_style This bit coded integer value controls how articles are to be quoted when following up or replying to them. Any of the following options can be combined by adding all rele- vant values. Default is 5, which means that quote charac- ters are compressed and empty lines are quoted. 0 Nothing special Non empty lines are quoted. 1 Compress quotes Compress quote characters together when quoting multiple times (for example, '> > >' will be turned into '>>>'). This option is on by default. 2 Quote Signatures This option is off by default. Signatures are always quoted regardless of this op- tion when you are viewing an article in raw mode PageToggleRaw ('^H') and followup or reply to it. Signatures are never quoted regardless of this op- tion when show_signatures is off. 4 Quote empty lines This option is on by default. quote_regex A regular expression that will be applied when reading articles. All matching lines are shown in col_quote. If quote_regex is blank, then tin(1) uses a built-in de- fault. quote_regex2 A regular expression that will be applied when reading articles. All matching lines are shown in col_quote2. If quote_regex2 is blank, then tin(1) uses a built-in de- fault. quote_regex3 A regular expression that will be applied when reading articles. All matching lines are shown in col_quote3. If quote_regex3 is blank, then tin(1) uses a built-in de- fault. recent_time If set to 0, this feature is deactivated, otherwise it means the number of days. Default is 2. render_bidi If ON tin(1) does the rendering of bi-directional text. If OFF tin(1) leaves the rendering of bi-directional text to the terminal. Default is OFF. reread_active_file_secs The news ${TIN_LIBDIR:-NEWSLIBDIR}"/"${TIN_ACTIVE- FILE:-active} file is reread at regular intervals to show if any new news has arrived. Default is 1200. Setting this to 0 will disable this feature. savedir Directory where articles/threads are saved. Default is ${TIN_HOMEDIR:-"$HOME"}/News. score_limit_kill If the score of an article is below or equal this value the article gets marked as killed. score_limit_select If the score of an article is above or equal this value the article gets marked as hot. score_kill Score of an article which should be killed, this must be <= score_limit_kill. score_select Score of an article which should be marked hot, this must be >= score_limit_select. scroll_lines The number of lines that will be scrolled up/down in the article pager when using cursor-up/down. The default is 1 (line-by-line). Set to 0 to get traditional tin(1) page- by-page scrolling. Set to -1 to get page-by-page scrolling where the top/bottom line is carried over onto the next page. This setting supersedes show_last_line_prev_page=ON. Set to -2 to get half-page scrolling. This setting supersedes full_page_scroll=OFF. select_format The format string used for the Selection level. Default is "%f %n %U %G %d". The following substitutions are supported: %G group name %U unread count %d description %f group flag %n current group number %% % sort_function Function used for sorting articles. Default is 0. 0 Use qsort(3) for sorting. 1 Use heapsort(3) for sorting. This might be faster in large groups with long threads (somewhat presorted data). show_author Which information about the author should be shown. De- fault is 2, authors full name. 0 None, only the ''Subject:'' line will be displayed. 1 Address, ''Subject:'' line & the address part of the ''From:'' line are displayed. 2 Full Name, ''Subject:'' line & the authors full name part of the ''From:'' line are displayed (de- fault). 3 Address and Name, ''Subject:'' line & all of the ''From:'' line are displayed. show_art_score If ON show article score in the lower left corner when displaying articles. Default is OFF. See also col_score_neg and col_score_pos. show_description If ON show a short group description text after newsgroup name at the group selection level. The ''-d'' command- line flag will override the setting and turn descriptions off. The text used is taken from the ${TIN_LIB- DIR:-NEWSLIBDIR}/newsgroups file and if supported (re- quires tin(1) to be built with mh-mail-handling support) from ${TIN_HOMEDIR:-"$HOME"}/.tin/mailgroups for mail- groups. Default is ON. show_help_mail_sign Allows you to select whether tin(1) shows a help indica- tion, a new mail indication, both, or neither in the var- ious level titles. Default is 3. 0 Don't show help or mail sign. 1 Show only help sign. 2 Show only mail sign if new mail, show only the mail sign, and only if new mail has arrived. 3 Show mail if new mail else help s., show mail sign if new mail has arrived otherwise show help sign. show_only_unread_arts If ON show only new/unread articles otherwise show all articles. Default is ON. show_only_unread_groups If ON show only subscribed groups that contain unread ar- ticles. Default is OFF. show_signatures If OFF don't show signatures when displaying articles. Default is ON. sigdashes If ON prepend the signature with sigdashes. Default is ON. sigfile The path that specifies the signature file to use when posting, following up to or replying to an article. If the path is a directory then the signature will be ran- domly generated from files that are in the specified di- rectory. If a file named .sigfixed does exist in that dir or ${TIN_HOMEDIR:-"$HOME"}/.sigfixed does exist it will be prepended to the chosen signature (first match counts). If the path starts with a ! the program the path points to will be executed to generate a signature. In order to pass the group name to the program, %G can be specified. This will be replaced by the name of the cur- rent newsgroup. --none will suppress any signature. De- fault is ${TIN_HOMEDIR:-"$HOME"}/.Sig. See also ${TIN_HOMEDIR:-"$HOME"}/.sigfixed. signature_repost If ON add signature to reposted articles. Default is ON. slashes_regex A regular expression that will be applied when reading articles. All matching words are shown in col_markslash or mono_markslash. If slashes_regex is blank, then tin(1) uses a built-in default. sort_article_type This specifies how articles should be sorted. Sort by as- cending Date (6) is the default. The following sort types are allowed: 0 Nothing, don't sort articles. 1 Subject: (descending), sort articles by ''Sub- ject:'' field descending. 2 Subject: (ascending), sort articles by ''Subject:'' field ascending. 3 From: (descending), sort articles by ''From:'' field descending. 4 From: (ascending), sort articles by ''From:'' field ascending. 5 Date: (descending), sort articles by ''Date:'' field descending. 6 Date: (ascending), sort articles by ''Date:'' field ascending (default). 7 Score (descending), sort articles by filtering score descending. 8 Score (ascending), sort articles by filtering score ascending. 9 Lines: (descending), sort articles by ''Lines:'' field descending. 10 Lines: (ascending), sort articles by ''Lines:'' field ascending. sort_threads_type This specifies how threads will be sorted. Sort by de- scending Score (1) is the default. The following sort types are allowed: 0 Nothing, don't sort threads. 1 Score (descending), sort threads by filtering score descending (default). 2 Score (ascending), sort threads by filtering score ascending. 3 Last posting date (descending), sort threads by date of last posting descending. 4 Last posting date (ascending), sort threads by date of last posting ascending. spamtrap_warning_addresses Set this option to a list of comma-separated strings to be warned if you are replying to an article by mail where the e-mail address contains one of these strings. The matching is case-insensitive. Example: spam,delete,remove stars_regex A regular expression that will be applied when reading articles. All matching words are shown in col_markstar or mono_markstar. If stars_regex is blank, then tin(1) uses a built-in default. strip_blanks Strips the blanks from the end of each line therefore speeding up the display when reading on a slow terminal or via modem. Default is ON. strip_bogus Bogus groups are groups that are present in your ${TIN_HOMEDIR:-"$HOME"}/.newsrc file that no longer exist on the news server. There are 3 options. 0 means do noth- ing & always keep bogus groups. 1 means bogus groups will be permanently removed. 2 means that bogus groups will appear on the Group Selection Menu, prefixed with a 'D'. This allows you to unsubscribe from them as and when you wish. Default is 0 (Always Keep). strip_newsrc If ON, then unsubscribed groups will be permanently re- moved from your ${TIN_HOMEDIR:-"$HOME"}/.newsrc file. De- fault is OFF. strip_re_regex A regular expression to find Subject prefixes like "Re:" to remove If strip_re_regex is blank, then tin(1) uses a built-in default. strip_was_regex A regular expression to find Subject suffixes like "(was:" to remove. If strip_was_regex is blank, then tin(1) uses a built-in default. strokes_regex A regular expression that will be applied when reading articles. All matching words are shown in col_markstroke or mono_markstroke. If strokes_regex is blank, then tin(1) uses a built-in default. tex2iso_conv Decode German style TeX umlaut codes to ISO If ON, show "a as Umlaut-a, etc. Default is OFF. This behavior can also be toggled in the article viewer via PageToggle- Tex2iso ('"'). thread_articles Defines which threading method to use. The choices are: 0 Don't thread 1 Thread on Subject only 2 Thread on References only 3 Thread on References then Subject (default) 4 Thread multipart articles on Subject 5 Thread on Percentage Match of the Subjects It's also possible to set the threading type on a per group ba- sis by setting the group attribute variable thread_articles to 0 - 5 in the file ${TIN_HOMEDIR:-"$HOME"}/.tin/attributes. thread_format The format string used for the Thread level. Default is "%n %m [%L] %T %F". The following substitutions are supported: %D date %F from, name and/or address %I initials %L line count %M message-id %S score %T thread tree %m article marks %n current article number %% % thread_perc Defines how close the subjects must match while threading by Percentage Match for threads to be considered part of a single thread. This value is in the range 0 to 100. The default is 75. thread_catchup_on_exit If ON catchup group/thread when leaving with the left ar- row key. Default is ON. thread_score How the total score of a thread is computed. Default is 0, the maximum score in this thread. 0 Max, the maximum score in this thread. 1 Sum, the sum of all scores in this thread. 2 Average, the average score in this thread. tls_ca_cert_file The name of file containing all trusted CA certificates used for NNTPS (RFC8143) connections. If left empty the system default will be used. translit If ON append //TRANSLIT to the first argument of iconv_open(3) to enable transliteration. This means that when a character cannot be represented in the target character set, it can be approximated through one or sev- eral similarly looking characters. On systems where this extension doesn't exist, this option is disabled. Default is OFF. trim_article_body Allows you to select how tin(1) treats blank lines in ar- ticle bodies. Default is 0. This option does not affect lines within verbatim blocks. 0 Don't trim article body, do nothing. 1 Skip leading blank lines. 2 Skip trailing blank lines. 3 Skip leading and trailing blank l., skip leading and trailing blank lines. 4 Compact multiple between text, replace multiple blank lines between text blocks with one blank line. 5 Compact multiple and skip leading, 4 + 1 6 Compact multiple and skip trailing, 4 + 2 7 Compact mltpl., skip lead. & trai., 4 + 3 suppress_soft_hyphens If ON remove soft hyphens (U+00AD) from non verbatim blocks when displaying articles. Default is OFF. underscores_regex A regular expression that will be applied when reading articles. All matching words are shown in col_markdash or mono_markdash. If underscores_regex is blank, then tin(1) uses a built-in default. unlink_article If ON remove ${TIN_HOMEDIR:-"$HOME"}/.article after post- ing. Default is ON. url_handler The program that will be run when launching URLs in the article viewer using PageViewUrl ('U'). The actual URL will be appended. Default is tinurl_handler.pl. url_highlight Enable highlighting URLs in message body. Default is ON. use_color If enabled tin(1) uses ANSI-colors. Default is OFF. use_keypad Use scroll keys on keypad. Default is OFF. use_mouse Allows the mouse button support in an xterm(1x) to be en- abled/disabled. Default is OFF. use_slrnface If enabled slrnface(1) will be used to interpret the ''X-Face:'' header. For this option to have any effect, tin(1) must be running in an xterm(1x) and slrnface(1) must be in your $PATH. Default is OFF. utf8_graphics If ON use UTF-8 characters for indicator ('->'), thread/attachment tree and ellipsis ('...'). Default is OFF. verbatim_begin_regex A regular expression that tin(1) will use to find the be- gin of a verbatim block. Default is #v+ verbatim_end_regex A regular expression that tin(1) will use to find the end of a verbatim block. Default is #v- verbatim_handling If ON verbatim blocks will be detected. Default is ON. wildcard Allows you to select how tin(1) matches strings. The de- fault is 0 and uses the wildmat(3) notation, which is how this has traditionally been handled. Setting this to 1 allows you to use perl(1) compatible regular expressions pcre(3) or pcre2(3). (see also perlre(1) and pcrepattern(3) or pcre2pattern(3)). You will probably want to update your filter file if you use this regu- larly. NB: Newsgroup names will always be matched using the wildmat(3) notation. word_h_display_marks Should the leading and ending stars, slashes, strokes and dashes also be displayed, even when they are highlighting marks? 0 no 1 yes, display mark 2 print a space instead word_highlight Enable word highlighting. See word_h_display_marks for the options available. If use_color is enabled the colors specified in col_markdash, col_markslash, col_markstar and col_markstroke are used for word highlighting else the character attributes specified in mono_markdash, mono_markslash, mono_markstar and mono_markstroke are used. Default is ON. wrap_column Sets the column at which a displayed article body should be wrapped. If this value is equal to 0, it defaults to the current screen width. If this value is greater than your current screen width and dont_break_words is unset the part off-screen is not displayed. Thus setting this option to a large value can be used to disable wrapping. If this value is negative the wrap margin is the current screen width plus the given value (as long as the result is still positive, otherwise it will fall back to the current screen width). Default is 0, wrapping at the cur- rent screen width. wrap_on_next_unread If enabled a search for the next unread article will wrap around all articles to find also previous unread arti- cles. If disabled the search stops at the end of the thread list. Default is ON. xpost_quote_format Format is the same as for news_quote_format, this is used when answering to a crossposting to several groups with no ''Followup-To:'' set. /etc/tin/tin.defaults Yet another global configuration file with "variable=value" pairs. This one is for the more general options which usually can't be controlled via ${TIN_LIBDIR:-NEWSLIBDIR}/tinrc and/or ${TIN_HOMEDIR:-"$HOME"}/.tin/tinrc like resetting (to override the built-in default) the newslibdir. domainname Sets a global domain name used in From lines organization Defines the name of your organization. $ORGANIZATION overrides any specified value. newslibdir Defines the default place for some configuration files, common values are /usr/local/news/lib, /var/lib/news, /usr/local/lib/news or /news/db. $TIN_LIBDIR overrides any specified value. bugaddress Defines the email address to which users can send bug re- ports using a built-in function. The default points to a developers mailing list located at tin.org. You might want to change this address to one of your local adminis- tration if you want to deal with your lusers problems on your own. inewsdir Defines the directory containing the inews(1) executable. mm_charset Default charset to be used in MIME's ''Content-Type:'' header. $MM_CHARSET overrides any specified value. post_mime_encoding Default encoding scheme used in MIME articles. 8bit might be the best value. mail_mime_encoding Default encoding scheme used in MIME letters. quoted-printable is a good choice here. disable_gnksa_domain_check Allow unregistered top level domains. As the list of valid TLDs is no longer actively maintained the default was changed to ON starting with tin(1) version 2.1.5 disable_sender Don't generate a ''Sender:'' header. This has an effect only if inews_prog is set to --internal. spooldir Base of your newsspool (Bnews, Cnews and INN traditional spool style), common values are /var/news, /usr/spool/news, /news/spool. $TIN_SPOOLDIR overrides any specified value. overviewdir Base of your NOV database newsoverview(5) (tradspool style; might be the same dir as spooldir), common values are /var/spool/overview, /usr/spool/overview, /news/overview. $TIN_NOVROOTDIR overrides any specified value. overviewfile Name of a single overview file, common values are .overview or over.view. $TIN_NOVFILENAME overrides any specified value. overviewfmtfile Full pathname of your newssystem's overview.fmt file; usually the file resides in newslibdir and is named overview.fmt, so you only have to change this setting if your configuration differs. activefile Full pathname of your newssystem's active file; usually the file resides in newslibdir and is named active, so you only have to change this setting if your configura- tion differs. $TIN_ACTIVEFILE overrides any specified value. activetimesfile Full pathname of your newssystem's active.times file; usually the file resides in newslibdir and is named ac- tive.times, so you only have to change this setting if your configuration differs. newsgroupsfile Full pathname of your newssystem's newsgroups file; usu- ally the file resides in newslibdir and is named news- groups, so you only have to change this setting if your configuration differs. subscriptionsfile Full pathname of your newssystem's subscriptions file; usually the file resides in newslibdir and is named sub- scriptions, so you only have to change this setting if your configuration differs. /usr/local/share/locale/$LC_MESSAGES/LC_MESSAGES/tin.mo translation into language specified in $LC_ALL, $LC_MESSAGES or $LANG ${TIN_LIBDIR:-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:-active} This file lists the newsgroups that the local site receives. Each newsgroup should be listed only once. Each line specifies one group; within each newsgroup, articles are assigned unique names, which are monotonically increasing numbers. If an article is posted to newsgroups not mentioned in this file, those newsgroups are ignored. If no valid newsgroups are specified, the article is rejected. Each line consists of four space-separated fields "name highmark lowmark flags". name is the name of the newsgroup highmark is the highest article number that has been used in that newsgroup lowmark is the lowest article number in the group; this number is not guaranteed to be accurate, and should only be taken to be a hint. Note that because of article cancellations, there may be gaps in the numbering sequence. If the low- est article number is greater than the highest article number, then there are no articles in the newsgroup. flags can be one of those y local postings are allowed n no local postings are allowed, only remote ones m the group is moderated and all postings must be approved j articles in this group are not kept, but only passed on x articles cannot be posted to this newsgroup =foo.bar articles are locally filed into the ''foo.bar'' group tin(1) only tries to read the file if you read directly from the local spool, if you read news via NNTP, tin(1) uses the LIST (RFC3977) or LIST COUNTS (RFC6048) command instead. ${TIN_LIBDIR:-NEWSLIBDIR}/active.times This file provides a chronological record of when newsgroups are created. It is normally updated by the local news server (e.g., innd(8)) whenever a new group is created. Each line consist of three space-separated fields "name time creator". name is the name of the newsgroup time is the time when the group was created, expressed as the number of seconds since the Epoch. creator is the electronic mail address of the person who created the group. tin(1) only tries to read the file if you read directly from the local spool, if you read news via NNTP, tin(1) uses the NEWGROUPS (RFC3977) command instead. ${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups This file provides short descriptions of each newsgroup. It is normally updated by the local news server (e.g., innd(8)) when- ever a new group is created. Each line consist of two tab-sepa- rated fields "group.name one-line description". group.name is the name of the newsgroup one-line description is a short single-line description of the group tin(1) only tries to read the file if you read directly from the local spool, if you read news via NNTP, tin(1) uses the LIST NEWSGROUPS (RFC3977) command instead. ${TIN_LIBDIR:-NEWSLIBDIR}/organization This file might hold a default organization to be used in the ''Organization:'' header. $ORGANIZATION has a higher priority if set. ${TIN_LIBDIR:-NEWSLIBDIR}/overview.fmt This file specifies the organization of the news overview data- base (see also newsoverview(5)). The order of lines in this file is important; it determines the order in which the fields will appear in the database. See also overview.fmt(5). tin(1) only tries to read the file if you read directly from the local spool, if you read news via NNTP, tin(1) uses the LIST OVERVIEW.FMT (RFC3977) command instead. ${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions This file contains a list of newsgroups -- one per line -- which the client should subscribe to when the user has no ${TIN_HOME- DIR:-"$HOME"}/.newsrc for the news server. tin(1) only tries to read the file if you read directly from the local spool, if you read news via NNTP, tin(1) uses the LIST SUBSCRIPTIONS (RFC6048) command instead. SEE ALSO inews(1), ispell(1), lp(1), lpr(1), metamail(1), mutt(1), perl(1), perlre(1), pgp(1), rn(1), shar(1), slrnface(1), tin(1), xterm(1x), heapsort(3), iconv(3), iconv_open(3), nl_langinfo(3), pcre(3), pcre2(3), pcrepattern(3), pcre2pattern(3), qsort(3), strftime(3), system(3), active(5), mailcap(5), mbox(5), mmdf(5), newsoverview(5), overview.fmt(5), innd(8), RFC1524, RFC1952, RFC2045, RFC2046, RFC2047, RFC2231, RFC2980, RFC3977, RFC4155, RFC4643, RFC5198, RFC5322, RFC5536, RFC5537, RFC6048, RFC6838, RFC8143 2.6.4 December 24th, 2024 tin(5)
NAME | DESCRIPTION | FILES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=tin&sektion=5&manpath=FreeBSD+Ports+14.3.quarterly>