FreeBSD Manual Pages
AUDIT_CONTROL(5) File Formats Manual AUDIT_CONTROL(5) NAME audit_control -- audit system parameters DESCRIPTION The audit_control file contains several audit system parameters. Each line of this file is of the form: parameter:value The parameters are: dir The directory where audit log files are stored. There may be more than one of these entries. Changes to this entry can only be enacted by restarting the audit system. See audit(8) for a description of how to restart the audit system. flags Specifies which audit event classes are audited for all users. audit_user(5) describes how to audit events for individual users. See the information below for the format of the audit flags. host Specify the hostname or IP address to be used when setting the local systems's audit host information. This hostname will be converted into an IP or IPv6 address and will be included in the header of each audit record. Due to the possibility of transient errors coupled with the security issues in the DNS protocol itself, the use of DNS should be avoided. Instead, it is strongly recommended that the hostname be specified in the /etc/hosts file. For more information see hosts(5). naflags Contains the audit flags that define what classes of events are audited when an action cannot be attributed to a specific user. minfree The minimum free space required on the file system audit logs are being written to. When the free space falls below this limit a warning will be issued. If no value for the minimum free space is set, the default of 20 percent is applied by the kernel. policy A list of global audit policy flags specifying various behav- iors, such as fail stop, auditing of paths and arguments, etc. filesz Maximum trail size in bytes; if set to a non-0 value, the audit daemon will rotate the audit trail file at around this size. Sizes less than the minimum trail size (default of 512K) will be rejected as invalid. If 0, trail files will not be automat- ically rotated based on file size. For convenience, the trail size may be expressed with suffix letters: B (Bytes), K (Kilo- bytes), M (Megabytes), or G (Gigabytes). For example, 2M is the same as 2097152. expire-after Specifies when audit log files will expire and be removed. This may be after a time period has passed since the file was last written to or when the aggregate of all the trail files have reached a specified size or a combination of both. If no expire-after parameter is given then audit log files will not expire and be removed by the audit control system. See the in- formation below for the format of the expiration specification. AUDIT FLAGS Audit flags are a comma-delimited list of audit classes as defined in the audit_class(5) file. Event classes may be preceded by a prefix which changes their interpretation. The following prefixes may be used for each class: (none) Record both successful and failed events. + Record successful events. - Record failed events. ^ Record neither successful nor failed events. ^+ Do not record successful events. ^- Do not record failed events. AUDIT POLICY FLAGS The policy flags field is a comma-delimited list of policy flags from the following list: cnt Allow processes to continue running even though events are not being audited. If not set, processes will be suspended when the audit store space is exhausted. Currently, this is not a recoverable state. ahlt Fail stop the system if unable to audit an event--this consists of first draining pending records to disk, and then halting the operating system. argv Audit command line arguments to execve(2). arge Audit environmental variable arguments to execve(2). seq Include a unique audit sequence number token in gener- ated audit records (not implemented on FreeBSD or Dar- win). group Include supplementary groups list in generated audit records (not implemented on FreeBSD or Darwin; supple- mentary groups are never included in records on these systems). trail Append a trailer token to each audit record (not imple- mented on FreeBSD or Darwin; trailers are always in- cluded in records on these systems). path Include secondary file paths in audit records (not im- plemented on FreeBSD or Darwin; secondary paths are never included in records on these systems). zonename Include a zone ID token with each audit record (not im- plemented on FreeBSD or Darwin; FreeBSD audit records do not currently include the jail ID or name). perzone Enable auditing for each local zone (not implemented on FreeBSD or Darwin; on FreeBSD, audit records are col- lected from all jails and placed in a single global trail, and only limited audit controls are permitted within a jail). It is recommended that installations set the cnt flag but not ahlt flag unless it is intended that audit logs exceeding available disk space halt the system. AUDIT LOG EXPIRATION SPECIFICATION The expiration specification can be one value or two values with the logical conjunction of AND/OR between them. Values for the audit log file age are numbers with the following suffixes: s Log file age in seconds. h Log file age in hours. d Log file age in days. y Log file age in years. Values for the disk space used are numbers with the following suffixes: (space) or B Disk space used in Bytes. K Disk space used in Kilobytes. M Disk space used in Megabytes. G Disk space used in Gigabytes. The suffixes on the values are case sensitive. If both an age and disk space value are used they are seperated by AND or OR and both values are used to determine when audit log files expire. In the case of AND, both the age and disk space conditions must be met before the log file is removed. In the case of OR, either condition may expire the log file. For example: expire-after: 60d AND 1G will expire files that are older than 60 days but only if 1 gigabyte of disk space total is being used by the audit logs. DEFAULT The following settings appear in the default audit_control file: dir:/var/audit flags:lo,aa minfree:5 naflags:lo,aa policy:cnt,argv filesz:2M expire-after:10M The flags parameter above specifies the system-wide mask corresponding to login/logout as well as authentication and authorization events. The policy parameter specifies that the system should neither fail stop nor suspend processes when the audit store fills and that command line arguments should be audited for AUE_EXECVE events. The trail file will be automatically rotated by the audit daemon when the file size reaches approximately 2MB. Trail files will expire when their aggregate size exceeds 10MB. FILES /etc/security/audit_control SEE ALSO auditon(2), audit(4), audit_class(5), audit_event(5), audit_user(5), audit(8), auditd(8) HISTORY The OpenBSM implementation was created by McAfee Research, the security division of McAfee Inc., under contract to Apple Computer Inc. in 2004. It was subsequently adopted by the TrustedBSD Project as the foundation for the OpenBSM distribution. AUTHORS This software was created by McAfee Research, the security research di- vision of McAfee, Inc., under contract to Apple Computer Inc. Addi- tional authors include Wayne Salamon, Robert Watson, and SPARTA Inc. The Basic Security Module (BSM) interface to audit records and audit event stream format were defined by Sun Microsystems. FreeBSD ports 15.0 May 14, 2009 AUDIT_CONTROL(5)
NAME | DESCRIPTION | AUDIT FLAGS | AUDIT POLICY FLAGS | AUDIT LOG EXPIRATION SPECIFICATION | DEFAULT | FILES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=audit_control&sektion=5&manpath=FreeBSD+Ports+15.0>