FreeBSD Manual Pages
BAR(1) General Commands Manual BAR(1) NAME bar - show information about a data transfer SYNOPSIS bar [ I/O-options ] [ display-options ] [ color-options ] [ input-file ] [ output-file ] [ -h | --help ] [ -v | --version ] DESCRIPTION Bar is a simple tool to process a stream of data and print a display for the user on stderr showing (a) the amount of data passed, (b) the throughput of the data transfer, and, if the total size of the data stream is known, (c) estimated time remaining, percent complete, and a progress bar. Bar was originally written for the purpose of estimating the amount of time needed to transfer large amounts (many, many gigabytes) of data across a network. (Usually in an SSH/tar pipe.) I/O COMMAND LINE OPTIONS -if input-file --in-file input-file Read input from input-file. Default: stdin -of output-file --out-file output-file Write output to output-file. If the output file is a directory, then bar will attempt to create a file in the output directory with the same name as the input file, and attempt to copy the input file mode as well as it's data. Default: stdout Please notice that if no -if, --in-file, -of, or --out-file options are specified on the command line, and an unknown command line option is encountered, then bar will assume that the first unknown command line option is a path to an input file, and the second (if found) is a path to an output file. -s size --size size Expect an input stream of size bytes. When reading a regular file or a link to a regular file, bar will ex- tract the file size on it's own. However, this flag is useful for reading from a character- or block-special device file, or from a pipe. size may be followed by 'k', 'm', 'g', 't', 'p', or 'e' for kilobytes, megabytes, gigabytes, terabytes, petabytes, or exabytes, respectively (see also the -k option below). Alternatively, size may also be specified in terms of 'b' for blocks (see the -bl option be- low). See examples below. -c size --completed size Instruct bar that size bytes of the data stream have already been copied, and that this is a continuation of a previous data stream. Note that use of this option will throw off throughput and ETA calcu- lations at first, but they should settle down as the transfer contin- ues. -bs buffer-size --buffer-size buffer-size Allocate an I/O buffer of buffer-size bytes. The same modifiers may apply here ('k', 'm', 'g', 't', 'p', 'e' and 'b') as for the -s flag above. Changing the buffer size can improve throughput, de- pending on your application of bar. For fast I/O operations, say from a ramdisk for instance, it might be worth your while to exper- iment with a large buffer (circa 1MB for instance). But for slow I/O operations, like from a tape drive, you could merely be wasting your memory. Default: 52488 (512KB) -th rate --throttle rate Restrict I/O throughput to rate bytes per second. The same modi- fiers apply here ('k', 'm', 'g', 't', 'p', 'e' and 'b') as for the -s flag above. -i seconds --interval seconds Update the display every seconds seconds. Default: 1 second -t microseconds --timeout microseconds The number of microseconds to wait for a change in I/O state before select() times out. Default: 250000 (1/4 second) -k 1000|1024 --kilo 1000|1024 Use either 1000 or 1024 as the definition of a kilobyte. Default: 1024 -bl size --block-size size When reading sizes from the command line that are specified in terms of blocks, assume a single block is size bytes. Size may be followed by 'k', 'm', 'g', 't', 'p', or 'e' for kilobytes, megabytes, gigabytes, terabytes, petabytes, or exabytes, respec- tively. Block size must be set before specifying any sizes in terms of blocks or the default value will be used instead. Speci- fying size in terms of 'b' for blocks is not allowed for this op- tion. Default: 512 DISPLAY COMMAND LINE OPTIONS -sw width --screen-width width Assume a screen width of width characters. Bar will attempt to retrieve the width of the terminal it is running on, and will adjust that width if the terminal is resized. If bar cannot determine the terminal width, then bar will assume a default width of 79 characters. Use the --screen-width command line option to override this behavior and specify a fixed width for bar to use. (When this option is used, bar will ignore terminal resized signals and continue to use the value provided by the user.) -sw-1 | --screen-width-minus-one -sw-0 | --screen-width-minus-zero Instruct bar to use either the entire column width reported by termio, or one less than reported by termio. I.e. If termio reports that you are running bar in a terminal that's 80 characters wide, us- ing the command line option --screen-width-minus-one instructs bar to only use 79 characters to print the display. If you're using a ter- minal or shell that wraps the line whenever bar prints the last char- acter then this should alleviate that problem. Default is to use the full terminal's width. -sh height --screen-height height Assume a screen height of height characters. Bar will attempt to retrieve the height of the terminal it is running on, and will adjust that height if the terminal is resized. If bar cannot determine the terminal height, then bar will assume a default height of 23 characters. Use the --screen-height command line option to override this behavior and specify a fixed height for bar to use. (When this option is used, bar will ignore terminal resized signals and continue to use the value provided by the user.) Please note that this option is only useful when used in conjunction with the --info-file command line option. Otherwise bar has no need to know the screen height in order to perform it's function. -sh-1 | --screen-height-minus-one -sh-0 | --screen-height-minus-zero Instruct bar to use either the entire row height reported by termio, or one less than reported by termio. I.e. If termio reports that you are running bar in a terminal that's 24 rows characters high, using the command line option --screen-height-minus-one instructs bar to only use 23 rows to print the display. If you're using a terminal or shell that wraps the line whenever bar prints the last character then this should alleviate that problem. Default is to use the full ter- minal's height. Please note that this option is only useful when used in conjunction with the --info-file command line option. Otherwise bar has no need to know the screen height in order to perform it's function. -ti string | --title string Set the title to string. -dti | -nti --display-title | --no-title Turn on/off the title display. Even if on, if no title string is set then no title will be displayed. Default is on. -dtw | --display-twiddle -ntw | --no-twiddle Turn on/off the twiddle in the display. -dc | --display-count -nc | --no-count Turn on/off the data count in the display. Default is on. -dcb | -ncb --display-count-bits | --no-count-bits Display the data count at bits instead of as bytes. Default is off. By default bar will display the data count as bytes using the nota- tion of "B". Using this option, bar will display the throughput as bits using the notation of "b". -dth | --display-throughput -nth | --no-throughput Turn on/off the data throughput in the display. Default is on. -dthb | -nthb --display-throughput-bits | --no-throughput-bits Display throughput as bits/second instead of as bytes/second. De- fault is off. By default bar will display the throughput as bytes/second using the notation of "B/s". Using this option, bar will display the through- put as bits/second using the notation of "b/s". -dt | --display-time -nt | --no-time Turn on/off the time elapsed or eta in the display. Default is on. -de | --display-elapsed-only -ne | --no-elapsed-only Force bar to display the elapsed time instead of the eta. Default is off. -dp | --display-percent -np | --no-percent Turn on/off percent complete in the display. Default is on. -db | --display-bar -nb | --no-bar Turn on/off the progress bar in the display. Default is on. -ds | --display-summary -ns | --no-summary Turn on/off the summary information displayed when the operation is complete. Default is on. -da | --display-all -dn | --display-none Turn on/off all displays. -dn is equivalent to -ntw -nc -nth -nt -np -nb. (Using -dn followed by -db would be equivalent to -ntw -nc -nth -nt -np.) -da is equivalent to -dtw -dc -dth -dt -dp -db. -inf infofile | --info-file infofile Display the information contained in infofile while copying data. The file infofile is a regular text file containing tidbits of infor- mation broken up into sections. Each section is separated by a line containing the string "@@@" by itself, with no other characters on the line, either preceeding or following. When bar begins, it will count the number of sections within the file. Bar will then begin by displaying the first section of infor- mation to the display before it draws the status line. Then, period- ically, each of the successive sections will be displayed as the progress indicator fills up. The progress of the data transfer is the trigger for each successive display. For instance, if your information file has exactly four sections to it, then the first section will be printed as bar begins, the second section after the data transfer hits 25%, the third at 50%, and the fourth at 75%. If bar is configured to use ANSI control codes, then the screen will be cleared before printing a section from the information file. Oth- erwise, the contents of the current screen are scolled up and off the screen. -dnum | --display-numeric Do not render the usual display, but instead display an integer rep- resenting the percent of the transfer that is complete, one integer per line. This output is suitable for piping to other programs such as dialog(1) or zenity(1). This implies that the total transfer size must be known by bar, either by finding the size of an input file di- rectly or by using the --size command line option. -dw | --display-wait Wait for the first byte of data to come through before displaying anything. COLOR COMMAND LINE OPTIONS For the following color-specific command line options, the following keywords are recognized as valid color names: normal, black, red, green, yellow, blue, magenta, cyan, and white -dan | --display-ansi -nan | --no-ansi Turn on/off the use of ansi color codes in the display. -spbg color | --space-background color Use color as the background color for spacing between display ob- jects. Default: normal -twfg color | --twiddle-foreground color -twbg color | --twiddle-background color Use color as the twiddle color in the display. Default: normal -twb | --twiddle-bold -twn | --twiddle-normal Turn on/off the use of bold font when displaying the twiddle. De- fault off -tifg color | --title-foreground color -tibg color | --title-background color Use color as the title color in the display. Default: normal -tib | --title-bold -tin | --title-normal Turn on/off the use of bold font when displaying the title. Default off -cfg color | --count-foreground color -cbg color | --count-background color Use color as the data count color in the display. Default: normal -cb | --count-bold -cn | --count-normal Turn on/off the use of bold font when displaying the data count. De- fault off -thlfg color | --throughput-label-foreground color -thlbg color | --throughput-label-background color Use color as the throughput label color in the display. Default: normal -thlb | --throughput-label-bold -thln | --throughput-label-normal Turn on/off the use of bold font when displaying the throughput la- bel. Default off -thfg color | --throughput-foreground color -thbg color | --throughput-background color Use color as the throughput color in the display. Default: normal -thb | --throughput-bold -thn | --throughput-normal Turn on/off the use of bold font when displaying the throughput. De- fault off -tlfg color | --time-label-foreground color -tlbg color | --time-label-background color Use color as the time label color in the display. Default: normal -tlb | --time-label-bold -tln | --time-label-normal Turn on/off the use of bold font when displaying the time label. De- fault off -tfg color | --time-foreground color -tbg color | --time-background color Use color as the time color in the display. Default: normal -tb | --time-bold -tn | --time-normal Turn on/off the use of bold font when displaying the time. Default off -pfg color | --percent-foreground color -pbg color | --percent-background color Use color as the percent color in the display. Default: normal -pb | --percent-bold -pn | --percent-normal Turn on/off the use of bold font when displaying the percent. De- fault off -bbfg color | --bar-brace-foreground color -bbbg color | --bar-brace-background color Use color as the brace color around the progress bar in the display. Default: normal -bbb | --bar-brace-bold -bbn | --bar-brace-normal Turn on/off the use of bold font when displaying the bar braces. De- fault off -bfg color | --bar-foreground color -bbg color | --bar-background color Use color as the color of the progress bar in the display. Default: normal -bb | --bar-bold -bn | --bar-normal Turn on/off the use of bold font when displaying the progress bar. Default off -bobc | --bar-openbrace-char char char as the open brace character on the progress bar. -bcbc | --bar-closebrace-char char char as the close brace character on the progress bar. -bcc | --bar-complete-char char char as the completed character on the progress bar. -bic | --bar-incomplete-char char char as the incomplete character on the progress bar. -h | --help Display this text and exit. -v | --version Display the program version and exit. RESOURCE FILE OPTIONS Some command line options may be specified in a resource file. Bar will search for a resource file by the name of /etc/clpbarrc and, if found, bar will use the values within by default. Next bar will search for ~/.barrc and, if found, bar will use these values to override any values set within /etc/clpbarrc. Last, bar will search for a file in the current working directory named ./.barrc. If this file exists, it's values will override the values found in ~/.barrc or /etc/clp- barrc. Values in all files may be overridden by command line flags. Lines that begin with a # are ignored. For resource options requiring a boolean value, the following values are recognized: on and off, yes and no, (and the single-character ab- breviations y and n), true and false, (and the single-character abbre- viations t and f), 0 and 1. For resource options requiring a color value, the same keywords are recognized as for the color-specific command line options above: nor- mal, black, red, green, yellow, blue, magenta, cyan, and white buffer-size: buffer-size Allocate an I/O buffer of buffer-size bytes. See the --buffer-size command line option above. throttle: rate Restrict I/O throughput to rate bytes per second. See the --throttle command line option above. interval: seconds Update the display every seconds seconds. See the --interval command line option above. timeout: microseconds The number of microseconds to wait for a change in I/O state before select() times out. See the --timeout command line option above. kilobyte: 1000|1024 Use either 1000 or 1024 as the definition of a kilobyte. See the --kilo command line option above. block-size: size When parsing sizes specified in terms of blocks, assume a single block is size bytes. See the --block-size command line option above. screen-width: width Override termio and assume that the screen is width characters wide. See the --screen-width command line option above. screen-width-minus-one: boolean Instruct bar to restrict the number of columns reported by termio by one. See the --screen-width-minus-one command line option above. display-twiddle: boolean Instruct bar to turn on/off the twirling twiddle character in the display. See the --display-twiddle command line option above. display-title: boolean Instruct bar to turn on/off the title in the display. See the --dis- play-title command line option above. display-count: boolean Instruct bar to turn on/off the data count in the display. See the --display-count command line option above. display-count-bits: boolean Display the data count as bits instead of as bytes. See the --dis- play-count-bits command line option above. display-throughput: boolean Instruct bar to turn on/off the data throughput in the display. See the --display-throughput command line option above. display-throughput-bits: boolean Display throughput as bits/sec instead of as bytes/sec. See the --display-throughput-bits command line option above. display-time: boolean Instruct bar to turn on/off the time in the display. See the --dis- play-time command line option above. display-elapsed-only: boolean Force bar to display the elapsed time instead of the eta. See the --display-elapsed-only command line option above. display-percent: boolean Instruct bar to turn on/off the percent complete in the display. See the --display-percent command line option above. display-bar: boolean Instruct bar to turn on/off the progress bar in the display. See the --display-bar command line option above. display-summary: boolean Instruct bar to turn on/off the summary information displayed when operation is complete. See the --display-summary command line option above. info-file: infofile Display the information contained in infofile while copying data. The file infofile is a regular text file containing tidbits of infor- mation broken up into sections. Each section is separated by a line containing the string "@@@" by itself, with no other characters on the line, either preceeding or following. When bar begins, it will count the number of sections within the file. Bar will then begin by displaying the first section of infor- mation to the display before it draws the status line. Then, period- ically, each of the successive sections will be displayed as the progress indicator fills up. The progress of the data transfer is the trigger for each successive display. For instance, if your information file has exactly four sections to it, then the first section will be printed as bar begins, the second section after the data transfer hits 25%, the third at 50%, and the fourth at 75%. If bar is configured to use ANSI control codes, then the screen will be cleared before printing a section from the information file. Oth- erwise, the contents of the current screen are scolled up and off the screen. display-numeric: boolean Do not render the usual display, but instead display an integer rep- resenting the percent of the transfer that is complete, one integer per line. This output is suitable for piping to other programs such as dialog(1) or zenity(1). This implies that the total transfer size must be known by bar, either by finding the size of an input file di- rectly or by using the --size command line option. display-wait: boolean Wait for the first byte of data to come through before displaying anything. display-ansi: boolean Instruct bar to turn on/off the use of ansi color codes in the dis- play. See the --display-ansi command line option above. space-background: color Use color as the background color for spacing between display ob- jects. See the --space-background command line option above. twiddle-foreground: color twiddle-background: color twiddle-bold: boolean Use the specified colors for the foreground and background of the twiddle, and use a bold font. See the --twiddle-foreground, --twid- dle-background, and --twiddle-bold command line options above. title: string Set the title string for the display. See the --title command line option above. title-foreground: color title-background: color title-bold: boolean Use the specified colors for the foreground and background of the ti- tle, and use a bold font. See the --title-foreground, --title-back- ground, and --title-bold command line options above. count-foreground: color count-background: color count-bold: boolean Use the specified colors for the foreground and background of the data count, and use a bold font. See the --count-foreground, --count-background, and --count-bold command line options above. throughput-label-foreground: color throughput-label-background: color throughput-label-bold: boolean Use the specified colors for the foreground and background of the throughput label, and use a bold font. See the --throughput-label- foreground, --throughput-label-background, and --throughput-label- bold command line options above. throughput-foreground: color throughput-background: color throughput-bold: boolean Use the specified colors for the foreground and background of the throughput, and use a bold font. See the --throughput-foreground, --throughput-background, and --throughput-bold command line options above. time-label-foreground: color time-label-background: color time-label-bold: boolean Use the specified colors for the foreground and background of the time label, and use a bold font. See the --time-label-foreground, --time-label-background, and --time-label-bold command line options above. time-foreground: color time-background: color time-bold: boolean Use the specified colors for the foreground and background of the time, and use a bold font. See the --time-foreground, --time-back- ground, and --time-bold command line options above. percent-foreground: color percent-background: color percent-bold: boolean Use the specified colors for the foreground and background of the percent, and use a bold font. See the --percent-foreground, --per- cent-background, and --percent-bold command line options above. bar-brace-foreground: color bar-brace-background: color bar-brace-bold: boolean Use the specified colors for the foreground and background of the brace surrounding the progress bar, and use a bold font. See the --bar-brace-foreground, --bar-brace-background, and --bar-brace-bold command line options above. bar-foreground: color bar-background: color bar-bold: boolean Use the specified colors for the foreground and background of the progress bar, and use a bold font. See the --bar-foreground, --bar- background, and --bar-bold command line options above. bar-openbrace-char: char bar-closebrace-char: char bar-complete-char: char bar-incomplete-char: Use the specified custom characters char for the opening brace, clos- ing brace, completed, and incomplete characters when rendering the progress bar. EXAMPLES Example 1: Using bar to copy a 2.4gb file from a device (in this case a tape drive) to a file, using a 64k buffer. prompt% bar --in-file /dev/rmt/1cbn --out-file \ tape-restore.tar --size 2.4g --buffer-size 64k Example 2: Using bar to copy a 37tb file across the network using SSH. prompt% ssh remote 'dd if=file' | bar --size 37t > file Example 3: Using bar inside a tar-pipe command: Normal tar-pipe command might be: prompt% (cd /some/dir/somewhere && tar -cf - *) \ | (cd /some/other/dir && tar -xBpf -) 3a: Using bar within the tar-pipe: prompt% (cd /some/dir/somewhere && tar -cf - *) \ | bar \ | (cd /some/other/dir && tar -xBpf -) 3b: Using bar with the --size option in a tar-pipe: prompt% du -sk /some/dir/somewhere 6281954 /some/dir/somewhere prompt% (cd /some/dir/somewhere && tar -cf - *) \ | bar --size 6281954k \ | (cd /some/other/dir && tar -xBpf -) Example 4: Using bar on a regular file. (Note that the --size option is not needed here, as bar will retrieve the file size itself.) prompt% bar --in-file ./file | ssh remote 'cd /some/dir && dd of=file' Example 5: Generating a 512k file of random data. prompt% dd if=/dev/random bs=1024 count=512 \ | bar -s 512k -of ./random Example 6: An example .barrc file. # # This is an example of what a ~/.barrc file # might look like. Note that lines beginning # with a # are ignored. # display-twiddle: no display-ansi: yes # space-background: black twiddle-foreground: green # twiddle-background: normal # twiddle-bold: no count-foreground: green # count-background: magenta count-bold: yes throughput-label-foreground: normal # throughput-label-background: red throughput-label-bold: no throughput-foreground: green # throughput-background: black throughput-bold: yes time-label-foreground: normal # time-label-background: red time-label-bold: no time-foreground: green # time-background: black time-bold: yes percent-foreground: green # percent-background: green percent-bold: yes bar-brace-foreground: red # bar-brace-background: blue bar-brace-bold: no bar-foreground: yellow # bar-background: blue bar-bold: yes NOTES - The --size option is only used by bar in calculating information about the data transfer. Bar will not cease copying data once it has reached the number of bytes specified with the --size option, but in- stead bar will continue to copy data until and end of input is reached. If this behavior is undesirable then bar may be used in conjunction with dd, where the count option is used with dd to spec- ify when to cut off the input stream. (See examples above.) - When using other commands such as du -k to calculate the expected size of a data transfer stream, the value returned may not be exactly the number of bytes counted by bar in the actual data transfer. Com- mon causes for this discrepancy could be attributed to round-off er- ror or the use of 1000 bytes as a kilobyte rather than 1024. (If the later is the case, then using the -k 1000 option to bar will help.) When such discrepancies occur, bar may report that the data stream contained only 98% or as much as 101% of it's expected size. (If you have doubts, you should definitely verify your data using md5sum, diff, or cmp.) - When the value of a calculation exceeds the size alloted for the dis- play, the value +99... will be substituted in it's place. The com- plete value will be displayed in a summary statement after bar has reached the end of input. - Bar assumes a linear relationship between the speed of the data transfer and the amount of time remaining. Specifically the calcula- tion is based on the following: elapsed time / eta = bytes written / total size However, it has been the author's experience that the throughput speed will change, particularly at the beginning of the transfer, and this will affect the estimated time remaining. The author does not believe this is a bug, but a side-effect of this method of calcula- tion. - Bar assumes that there are 8 bits in both a byte and a char. BUGS - Bar uses the open() and fstat() functions to open and retrieve the size of regular files when using either the --in-file or --out-file command line options. Some OS's do not support Large Files (file sizes up to (2**63)-1 bytes) natively. Some OS's support Large Files but require _FILE_OFFSET_BITS or _LARGE_FILES to be defined properly at compile time. Other OS's support neither, but still allow pro- grams to open files in excess of (2**32)-1 through an O_LARGEFILE op- tion that can be passed to the open() function. When trying to open files greater than 2gb on an OS without Large File support, bar will exit with the message: "File too large". When trying to write more than 2gb of data to a file, bar will write 2**32-1 bytes and then the OS may terminate bar with a message simi- lar to: "File size limit exceeded". When trying to open files greater than 2gb on an OS without Large File support, but with the O_LARGEFILE option that can be passed to open(), bar will receive an error when trying to retrieve the file's size, but bar will be able to open the file anyway. Under these cir- cumstances, bar will print a "File too large" error message, but will then proceed to transfer the data. Since bar will not be able to re- trieve the file's size on it's own, the --size command line option must be used after the --in-file option to tell bar the file size manually. On such OS's, bar should be able to write more than 2gb of data to a file without any problems. For OS's that support files greater than 2gb, either natively or through the Large File extension definitions mentioned above, bar should work as expected. - The author has noticed that when running bar over an SSH connection, sometimes window resize events are not captured until after the dis- play has gone through one or two more updates, which can cause the line to wrap. - The author has noticed that on some systems the use of aligned memory allocation, through either memalign() or posix_memalign(), causes bar to commit a segmentation fault the first time read() or readv() is called and passed a pointer to the aligned memory as it's input buffer. Attempts were made to try to isolate systems in which this bug bites through tests in configure, but all tests devised passed with flying colors. Therefore aligned memory allocation is turned off by default, and may only be enabled by passing --enable-use-mema- lign to configure when building the executable. - On some 64-bit systems it has been found that the CC compiler will, by default, compile bar in 32-bit mode. This has been known to cause math errors which result in segmentation faults and infinite loops. Although multiple configure tests have been added to the compilation phase to try to properly detect such compilers and compensate for such bugs, without access to such systems for debugging purposes there may be other bugs waiting to rear their ugly heads. Report all bugs to the author. Bar was developed on a Sun workstation running Solaris 8. To the best of the author's knowledge bar should compile and run on other platforms without much trouble. Should other OS's require modifications to the code, the author welcomes all patch submissions, but requests that you include the file config.log and the output of gcc -dumpspecs (or a listing of predefined variables, if not using gcc). DISTRIBUTION The latest version of bar can always be found at: http://www.freshmeat.net/projects/commandlineprogressbar http://sourceforge.net/projects/clpbar/ AUTHOR Bar was written by Michael Peek. See DISTRIBUTION above for contact information. Occasionally, the author fancies that he knows what he's doing. It is at these times more than ever that his coworkers should cower in fear... 4 November 2003 BAR(1)
NAME | SYNOPSIS | DESCRIPTION | I/O COMMAND LINE OPTIONS | DISPLAY COMMAND LINE OPTIONS | COLOR COMMAND LINE OPTIONS | RESOURCE FILE OPTIONS | EXAMPLES | NOTES | BUGS | DISTRIBUTION | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=bar&sektion=1&manpath=FreeBSD+Ports+15.0>