FreeBSD Manual Pages
BIP.CONF(5) File Formats Manual BIP.CONF(5) NAME bip.conf - Configuration file for BIP IRC Proxy SYNOPSIS ~/.bip/bip.conf DESCRIPTION A BIP configuration file consists of a list of variable affectations or sections. It contains the global options, networks definitions, users configuration, users connections declarations. Each section is de- scribed in this manpage. The bip.conf skeleton should be something like this : option1 = value; option2 = value; ... network { net_opt = value; ... server { ... }; server { ... }; }; ... user { user_opt = value; ... connection { conn_opt = value; ... channel { ... }; }; connection { conn_opt = value; ... channel { ... }; channel { ... }; ... }; }; SYNTAX RULES The syntax is quite simple : • everything after the # character is ignored (comments) • each variable affectation must be finished with a ; • each section { } must be finished with a ; If you use vim you will probably want to use vim with the provided bip.vim syntax file to avoid common syntax and lexical mistakes. You can also find an example configuration file along with BIP. By default, bipdir is the $HOME/.bip directory and the parent directory for client certificate, configuration, logs, pid, oidentd. If environ- ment variable $HOME doesn't exist, -s parameter must be used. GLOBAL OPTIONS client_side_ssl (default: false) When true, clients will need to connect to BIP using SSL. You'll also need to generate a SSL cert/key pair in bipdir/bip.pem (usually ~/.bip/bip.pem or /var/lib/bip/bip.pem) or client_side_ssl_pem if defined. client_side_ssl_pem (default: <bipdir>/bip.pem) Set this to the full path of the cert/key pair bip should use to accept clients SSL connections. client_side_ciphers OpenSSL cipher lists used for clients SSL connections. If not set, OpenSSL default ciphers will be used. client_side_dh_param DH parameters filename (default: <bipdir>/dh.pem) Used for clients SSL connections, Supply at least 2048-bit para- meters. ssl_default_ciphers OpenSSL cipher lists used for server connections. If not set, OpenSSL default ciphers will be used. ip (default: 0.0.0.0) Listening IP address. This is the IP address bip will listen for incoming client connections. log (default: true) When true, the log system is enabled. Else, BIP will not write a single log file. Backlog is then stored into memory. log_system (default: true) When true, system messages such as connection errors are logged. Else, BIP will not write system logs. log_format (default: %u/%n/%Y-%m/%c.%d.log) Determines the log filename depending on : - %u username (name in user { }; section) - %n network name (name in connection { }; section) - %c channel name - %Y 4 digits year - %m 2 digits month - %d 2 digits day log_level (default: 1) Specify the verbosity of BIP from 0 (fatal errors) to 6 (huge debug output) log_root (default: <bipdir>/logs Main log directory. Sub-directories and files will be created from there depending on log_format. log_sync_interval (default: 5) Defines the delay between each logfiles sync to the disk. Must be a non null positive integer. reconn_timer (default: 120) Defines the initial delay (in seconds) before a reconnection at- tempt. The delay increases with the number of attempts: delay = reconn_timer * number of attempts pid_file (default: <bipdir>/bip.pid) Defines the file where BIP's pid will be stored. BIP checks if this file exists and if the pid is still alive upon startup. If true, BIP refuses to start. write_oidentd (default: false) Must be set to true to overwrite oidentd configs. oidentd_file (default: <bipdir>/.oidentd.conf) oidentd configuration file (if oidentd enabled). port (default: 7778) The port on which BIP should listen for clients. NETWORK SECTION This section allows you to declare a network for use in the connection sections. It may appear more than once in the configuration file. ssl (default: false) If true, BIP will connect to this network using SSL only. You cannot mix SSL servers and non-SSL servers in the same network section. This is by choice, we believe it's a bad idea. ssl_ciphers (override global ssl_default_ciphers) OpenSSL cipher lists used for this network. name It's the network name used in the connection section. Please note that this value is not used in log_format, since it uses the variable name from the connection section. SERVER SUB-SECTION BIP will cycle through the server sections list when reconnecting to a network. It may appear more than once in a network section. host The server's hostname or IP address. port (default: 6667) The server port to connect to. USER SECTION This section allows you to define the users allowed to connect to BIP and their options. It may appear more than once in the configuration file. admin (default: false) If a user has admin set to true, he'll become a bip administra- tor, which allows him for example to reload bip from IRC or to see the user configuration. backlog (default: true) Enable or disable the whole backlog system, which allows clients to see a log replay upon connection. backlog_always (default: false) If true, clients will always receive backlog_lines log lines, even if they were already sent before. That means : If back- log_always is false, backlog will be reset whenever there is no more client connected to a network. Else backlog will not be re- set. This option should of course not be enabled if back- log_lines is 0 ! If you still want to do so, don't forget to /BIP BLRESET sometimes. backlog_lines (default: 10) If set to 0, BIP will replay all the logs since last client dis- connect. Else, it'll replay exactly backlog_lines lines on each channel and privates. Be aware that BIP will replay back- log_lines lines of all privates, even if there are more. For ex- ample if Coyote told you 12 lines and then RoadRunner 6, you'll only have a replay of the 6 RoadRunner's lines and the last 4 of Coyote's. backlog_timestamp (default: time) none disables timestamps in backlogged lines, time or datetime allow to select the timestamp format in backlogged lines. backlog_no_timestamp (default: false) This parameter is deprecated, use backlog_timestamp instead. false implies backlog_timestamp = none and true implies back- log_timestamp = time . backlog_reset_on_talk (default: false) When true, backlog will be reset upon client talk (channel/pri- vate message or action). It means that next time you log to your bip session, the backlogging will start at the time right after your last words on that specific channel or query. backlog_reset_connection (default: false) When true, backlog_reset_on_talk option above is changed in that the whole network backlog is resetted when you talk in the net- work. backlog_msg_only (default: false) When true, bip will backlog only channel/private messages/no- tices. No topic change, nick change, user quit/part/join will be backlogged upon connection. bip_use_notice (default: false) If bip_use_notice is true, bip's notifications to the clients will be send as notices instead of private messages. For exam- ple, this setting applies to disconnection notifications or /BIP command replies. default_nick The default nick option for each connection section where no nick is defined. See CONNECTION SECTION for more details. default_realname The default realname option for each connection section where no realname is defined. See CONNECTION SECTION for more details. default_user The default user option for each connection section where no user is defined. See CONNECTION SECTION for more details. name The username. It'll be used to authenticate to bip and in log_format. password The password. It MUST be generated with bipmkpw or it'll not work. ssl_check_mode (default: none) Tells whether BIP should check the server SSL certificate and against what. Can be none for no check at all, ca to check if the cert is signed by a Certificate Authority in repository, or basic to check if cert exists in repository. The repository is defined by ssl_check_store. This allows a "ssh-like" private key generation scheme. Note that in basic mode: - expired certificates that are in the store are considered valid. - CA-signed certificates are considered valid even if not in store. ssl_check_store (default: not set) This repository is browsed by BIP when a SSL certificate or CA check is needed. In ssl_check_mode basic it must be a file, to which certificates you choose to trust will be appended. In ssl_check_mode ca it may be a single file containing one or more trusted certificates concatenated together between BEGIN CER- TIFICATE and END CERTIFICATE lines, a directory containing indi- vidual certificates in PEM format which has been processed by c_rehash, or unset, in which case bip will attempt to use the default certificate store of the OpenSSL it is built against. ssl_client_certfile (default: not set) Some networks (OFTC at least) allow you to authenticate to nick- serv services using a client side certificate. Make this vari- able point to the .pem file to use this feature. CONNECTION SUB-SECTION Each connection section associates a user to the networks he wants to connect to. Thus, it must be declared in the User sections, and can be used more than once. away_nick (default: not set) If set, and if there are no more client attached, BIP will change nickname to this away_nick. Your nickname will be re- stored upon client connect. no_client_away_msg (default: not set) This options allows you to set an away message. This away mes- sage will be set when the last client disconnects, and removed when a client connects. follow_nick (default: false) If set to true, when you change nick, BIP stores the new nick- name as the new default nickname value. Thus, if you are discon- nected from the server, BIP will restore the correct nickname. autojoin_on_kick (default: true) If set to false bip will not attempt to re-join a channel from which you were kicked. ignore_first_nick (default: false) If set to true, BIP will ignore the nickname sent by the client upon connect. Further nickname changes will be processed as usual. ignore_server_capab (default: true) By default bip ignores when a server advertises the CAPAB fea- ture. Servers that support this can prefix each line with a "+" or a "-" depending if a user is registered or not. xchat checks if a server has the CAPAB feature and enables it. If you have two clients connected to a bip connection, one that supports this mode and one that does not, you see the plus and the mi- nuses on each line in the client that does not support CAPAB. To avoid that, when a server advertises CAPAB bip simply removes it. You can set this option to false to keep using CAPAB (if you only use clients that support it for instance). network The network name. See the NETWORK SECTION. log (override global log) When true, the file logs are enabled for this connection. When false, no log file is written, logs are kept in memory. nick BIP will send that string as your nickname upon connect. If not specified and if default_nickname is specified in the user sec- tion, BIP will use that default nickname string. on_connect_send You can specify this field more than once. BIP will send the text as is to the server. It'd be useful for a greet on connect or to send your NickServ password. password This is the IRC server password, which is sent upon connection to the IRC server only. realname BIP will send that string as the realname part (description in whois result) upon connect. If not specified and if default_re- alname is specified in the user section, BIP will use that de- fault realname string. source_port If specified, tells BIP to connect from this port to the IRC server. ssl_check_mode (default: the user's option) See ssl_check_mode option in User section. user BIP will send that string as the user part (usually between ! and @ in a whois result) upon connect. It's also used by the oidentd support (if enabled). If not specified and if de- fault_user is specified in the user section, BIP will use that default user string. vhost If specified, BIP will use vhost as the IP address to bind to when connecting to the IRC server. It'll allow you to use a spe- cific IP address for this network when you have more than one. This options is totally useless to people who only have one IP address. CHANNEL SUB-SUB-SECTION This section defines the list of channels to join for a user on a par- ticular network. It is to be found in the connection sections and ap- pear more than once in a connection section. name The channel name (#bip, &bip, ...). key The channel key if needed. backlog (default: true) Enable or disable backlogging of this particular channel. Set- ting this to true will NOT enable the backlog system, see the user section. IRC CLIENT CONFIGURATION On your IRC client, setup as many IRC servers as connections defined in your connection section. Host and port must match values defined in ip and port global option. The password must be username:password:connectionname where: • username is the name defined in the user section; • password is the clear text value of the password correspond- ing to the hashed password defined in the user section; • connectionname is the name defined in connection sub-sec- tion. SEE ALSO bip(1), bipmkpw(1) AUTHOR bip authors: Arnaud 'nohar' Cornet Loc 'Kyoshiro' Gomez Thanks to jj, YS and lafouine, for hanging around while we were coding. Crypto shamelessly taken from Christophe 'sexy' Devine. This man page is written by Loc 'Kyoshiro' Gomez. 23 February 2017 BIP.CONF(5)
NAME | SYNOPSIS | DESCRIPTION | SYNTAX RULES | GLOBAL OPTIONS | NETWORK SECTION | SERVER SUB-SECTION | USER SECTION | CONNECTION SUB-SECTION | CHANNEL SUB-SUB-SECTION | IRC CLIENT CONFIGURATION | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=bip.conf&sektion=5&manpath=FreeBSD+Ports+15.0>