FreeBSD Manual Pages
chilli-radius(5) File Formats Manual chilli-radius(5) NAME chilli-radius - Information about RADIUS in chilli DESCRIPTION chilli uses RADIUS for access provisioning and statistics. Standards and best practices defined in RFCs are followed as best possible. How- ever, chilli does take some liberties and bends the rules in places to better adapt to the more dynamic application of captive portals. See http://coova.org/wiki/index.php/CoovaChilli/RADIUS for details. ATTRIBUTES The RADIUS Attributes used by chilli and a short description: User-name (1) Full username as entered by the user. User-Password (2) Used for UAM as alternative to CHAP-Password and CHAP-Challenge. CHAP-Password (3) Used for UAM CHAP Authentication CHAP-Challenge (60) Used for UAM CHAP Authentication EAP-Message (79) Used for WPA Authentication NAS-IP-Address (4) IP address of Chilli (set by the ''nasip'' or ''radiuslisten'' option, and otherwise "0.0.0.0") Service-Type (6) Set to Login (1) for normal authentication requests. The Ac- cess-Accept message from the radius server for configuration management messages must also be set to Administrative-User. Framed-IP-Address (8) IP address of the user, which is configurable during MAC authen- tication in the Access-Accept. Filter-ID (11) Filter ID pass on to scripts possibly. Reply-Message (18) Reason of reject if present. State (24) Sent to chilli in Access-Accept or Access-Challenge. Used trans- parently in subsequent Access-Request. Class (25) Copied transparently by chilli from Access-Accept to Accounting- Request. Session-Timeout (27) Logout once session timeout is reached (seconds) Idle-Timeout (28) Logout once idle timeout is reached (seconds) Called-Station-ID (30) Set to the ''nasmac'' option or the MAC address of chilli. Calling-Station-ID (31) MAC address of client NAS-Identifier (32) Set to radiusnasid option if present. Acct-Status-Type (40) 1=Start, 2=Stop, 3=Interim-Update Acct-Input-Octets (42) Number of octets received from client. Acct-Output-Octets (43) Number of octets transmitted to client. Acct-Session-ID (44) Unique ID to link Access-Request and Accounting-Request mes- sages. Acct-Session-Time (46) Session duration in seconds. Acct-Input-Packets (47) Number of packets received from client. Acct-Output-Packets (48) Number of packets transmitted to client. Acct-Terminate-Cause (49) 1=User-Request, 2=Lost-Carrier, 4=Idle-Timeout, 5=Session-Time- out, 11=NAS-Reboot Acct-Input-Gigawords (52) Number of times the Acct-Input-Octets counter has wrapped around. Acct-Output-Gigawords (53) Number of times the Acct-Output-Octets counter has wrapped around. NAS-Port-Type (61) 19=Wireless-IEEE-802.11 Message-Authenticator (80) Is always included in Access-Request. If present in Access-Ac- cept, Access-Challenge or Access-reject chilli will validate that the Message-Authenticator is correct. Acct-Interim-Interval (85) If present in Access-Accept chilli will generate interim ac- counting records with the specified interval (seconds). WISPr-Location-ID (14122, 1) Location ID is set to the radiuslocationid option if present. Should be in the format: isocc=<ISO_Country_Code>, cc=<E.164_Country_Code>, ac=<E.164_Area_Code>, net- work=<ssid/ZONE> WISPr-Location-Name (14122, 2) Location Name is set to the radiuslocationname option if present. Should be in the format: <OPERATOR_NAME>,<LOCATION> WISPr-Logoff-URL (14122, 3) Included in Access-Request to notify the operator of the log off URL. Defaults to "http://uamlisten:uamport/logoff". WISPr-Redirection-URL (14122, 4) If present the client will be redirected to this URL once au- thenticated. This URL should include a link to WISPr-Logoff-URL in order to enable the client to log off. WISPr-Bandwidth-Max-Up (14122, 7) Maximum transmit rate (b/s). Limits the bandwidth of the connec- tion. Note that this attribute is specified in bits per second. WISPr-Bandwidth-Max-Down (14122, 8) Maximum receive rate (b/s). Limits the bandwidth of the connec- tion. Note that this attribute is specified in bits per second. WISPr-Session-Terminate-Time (14122, 9) The time when the user should be disconnected in ISO 8601 format (YYYY-MM-DDThh:mm:ssTZD). If TZD is not specified local time is assumed. For example a disconnect on 18 December 2001 at 7:00 PM UTC would be specified as 2001-12-18T19:00:00+00:00. ChilliSpot-Max-Input-Octets (14559, 1) Maximum number of octets the user is allowed to transmit. After this limit has been reached the user will be disconnected. ChilliSpot-Max-Output-Octets (14559, 2) Maximum number of octets the user is allowed to receive. After this limit has been reached the user will be disconnected. ChilliSpot-Max-Total-Octets (14559, 3) Maximum total octets the user is allowed to send or receive. Af- ter this limit has been reached the user will be disconnected. ChilliSpot-Bandwidth-Max-Up (14559, 4) Maximum bandwidth up ChilliSpot-Bandwidth-Max-Down (14559, 5) Maximum bandwidth down ChilliSpot-Config (14559, 6) Configurations passed between chilli and back-end as name value pairs ChilliSpot-Lang (14559, 7) Language selected in user interface ChilliSpot-Version (14559, 8) Version of Chilli sending this AccessRequest MS-MPPE-Send-Key (311,16) Used for WPA MS-MPPE-Recv-Key (311,17) Used for WPA SEE ALSO chilli(8) chilli.conf(5) chilli_radconfig(1) NOTES See http://coova.org/ for further documentation and community support. The original ChilliSpot project homepage is/was at www.chillispot.org. AUTHORS Copyright (C) 2006-2007 David Bird <david@coova.com>, CoovaChilli and ChilliSpot are licensed under the Gnu Public License. All rights re- served. August 2007 chilli-radius(5)
NAME | DESCRIPTION | ATTRIBUTES | SEE ALSO | NOTES | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=chilli-radius&sektion=5&manpath=FreeBSD+Ports+15.0>