FreeBSD Manual Pages
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME fence_heuristics_ping - Fence agent for ping-heuristic based fencing DESCRIPTION fence_heuristics_ping uses ping-heuristics to control execution of an- other fence agent on the same fencing level. This is not a fence agent by itself! Its only purpose is to enable/dis- able another fence agent that lives on the same fencing level but after fence_heuristics_ping. fence_heuristics_ping accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_heuristics_ping can be run by itself with command line op- tions. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: PARAMETERS -o, --action=[action] Fencing action (Default Value: reboot) -m, --method=[method] Method to fence (onoff|cycle) (Default Value: cycle) --ping-count=[number] The number of ping-probes that is being sent per target (Default Value: 10) --ping-good-count=[number] The number of positive ping-probes required to account a target as available (Default Value: 8) --ping-interval=[seconds] The interval in seconds between ping-probes (Default Value: 1) --ping-maxfail=[number] The number of failed ping-targets to still account as overall success (Default Value: 0) --ping-targets=tgt1,[inet6:]tgt2 A comma separated list of ping-targets (optionally prepended by 'inet:' or 'inet6:') to be probed (Default Value: ) --ping-timeout=[seconds] The timeout in seconds till an individual ping-probe is ac- counted as lost (Default Value: 2) -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. STDIN PARAMETERS action Fencing action (Default Value: reboot) method Method to fence (onoff|cycle) (Default Value: cycle) ping_count The number of ping-probes that is being sent per target (Default Value: 10) ping_good_count The number of positive ping-probes required to account a target as available (Default Value: 8) ping_interval The interval in seconds between ping-probes (Default Value: 1) ping_maxfail The number of failed ping-targets to still account as overall success (Default Value: 0) ping_targets A comma separated list of ping-targets (optionally prepended by 'inet:' or 'inet6:') to be probed (Default Value: ) ping_timeout The timeout in seconds till an individual ping-probe is ac- counted as lost (Default Value: 2) quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) retry_on Count of attempts to retry power on (Default Value: 1) fence_heuristics_ping (Fence A... 2009-10-20 FENCE_AGENT(8)
NAME | DESCRIPTION | PARAMETERS | ACTIONS | STDIN PARAMETERS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_heuristics_ping&sektion=8&manpath=FreeBSD+Ports+15.0>