FreeBSD Manual Pages
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME fence_pve - Fencing agent for the Proxmox Virtual Environment DESCRIPTION The fence_pve agent can be used to fence virtual machines acting as nodes in a virtualized cluster. fence_pve accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_pve can be run by itself with command line options. This is use- ful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.proxmox.com/ PARAMETERS -o, --action=[action] Fencing action (Default Value: reboot) -a, --ip=[ip] IP Address or Hostname of a node within the Proxmox cluster. This parameter is always required. -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 8006) -m, --method=[method] Method to fence (onoff|cycle) (Default Value: onoff) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[id] Id of the virtual machine. This parameter is always required. -z, --ssl Use SSL connection with verifying certificate (Default Value: 1) --ssl-insecure Use SSL connection without verifying certificate --ssl-secure Use SSL connection with verifying certificate -l, --username=[name] Login name (Default Value: root@pam) -N, --pve-node=[node_name] Proxmox node name on which machine is located. (Must be speci- fied if not using --pve-node-auto) -A, --pve-node-auto Automatically select proxmox node. (This option overrides --pve- node) --vmtype Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu) --nodename Replaced by --pve-node -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) -C, --separator=[char] Separator for CSV created by 'list' operation (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --gnutlscli-path=[path] Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli) ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. list-status List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. STDIN PARAMETERS action Fencing action (Default Value: reboot) ip IP Address or Hostname of a node within the Proxmox cluster. This parameter is always required. Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 8006) method Method to fence (onoff|cycle) (Default Value: onoff) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug Id of the virtual machine. This parameter is always required. Obsoletes: port ssl Use SSL connection with verifying certificate (Default Value: 1) ssl_insecure Use SSL connection without verifying certificate ssl_secure Use SSL connection with verifying certificate username Login name (Default Value: root@pam) Obsoletes: login pve_node Proxmox node name on which machine is located. (Must be speci- fied if not using --pve-node-auto) pve_node_auto Automatically select proxmox node. (This option overrides --pve- node) vmtype Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu) nodename Replaced by --pve-node Obsoletes: node_name quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) separator Separator for CSV created by 'list' operation (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) retry_on Count of attempts to retry power on (Default Value: 1) gnutlscli_path Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli) fence_pve (Fence Agent) 2009-10-20 FENCE_AGENT(8)
NAME | DESCRIPTION | PARAMETERS | ACTIONS | STDIN PARAMETERS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_pve&sektion=8&manpath=FreeBSD+Ports+15.0>