FreeBSD Manual Pages
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME fence_raritan_px3 - I/O Fencing agent for Raritan Dominion PX2 and PX3 DESCRIPTION fence_raritan is an I/O Fencing agent which can be used with the Rari- tan PX2 and PX3 Power Distribution Unit series. It logs into device via telnet or ssh and reboots a specified outlet. Single outlets and grouped outlets are supported. The fence is tested on this model: PX3-5466V. There have been issues seen with the telnet prompt on 3.4.x and 3.5.x Raritan firmware versions. It's recommended to update to at least version 3.6.x fence_raritan_px3 accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_raritan_px3 can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.raritan.com/ PARAMETERS -o, --action=[action] Fencing action (Default Value: reboot) -c, --command-prompt=[prompt] Force Python regex for command prompt (Default Value: .* #) -k, --identity-file=[filename] Identity file (private key) for SSH -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -a, --ip=[ip] IP address or hostname of fencing device This parameter is al- ways required. -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 23) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[id] Physical plug number on device, UUID or identification of ma- chine This parameter is always required. -x, --ssh Use SSH connection --ssh-options=[options] SSH options to use -l, --username=[name] Login name This parameter is always required. -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) -C, --separator=[char] Separator for CSV created by 'list' operation (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 8) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --ssh-path=[path] Path to ssh binary (Default Value: /usr/bin/ssh) --telnet-path=[path] Path to telnet binary (Default Value: /usr/bin/telnet) ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. list-status List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. STDIN PARAMETERS action Fencing action (Default Value: reboot) command_prompt Force Python regex for command prompt (Default Value: .* #) Ob- soletes: cmd_prompt identity_file Identity file (private key) for SSH inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only ip IP address or hostname of fencing device This parameter is al- ways required. Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 23) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug Physical plug number on device, UUID or identification of ma- chine This parameter is always required. Obsoletes: port ssh Use SSH connection Obsoletes: secure ssh_options SSH options to use username Login name This parameter is always required. Obsoletes: login quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) separator Separator for CSV created by 'list' operation (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 8) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) retry_on Count of attempts to retry power on (Default Value: 1) ssh_path Path to ssh binary (Default Value: /usr/bin/ssh) telnet_path Path to telnet binary (Default Value: /usr/bin/telnet) fence_raritan_px3 (Fence Agent) 2009-10-20 FENCE_AGENT(8)
NAME | DESCRIPTION | PARAMETERS | ACTIONS | STDIN PARAMETERS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_raritan_px3&sektion=8&manpath=FreeBSD+Ports+15.0>