FreeBSD Manual Pages
FPSYNC(1) General Commands Manual FPSYNC(1) NAME fpsync -- Synchronize directories in parallel using fpart and an exter- nal tool SYNOPSIS fpsync [-p] [-n jobs] [-w wrks] [-m tool] [-T path] [-f files] [-s size] [-E] [-o toolopts] [-O fpartopts] [-S] [-t tmpdir] [-d shdir] [-M mailaddr] [-v] src_dir/ dst_url/ fpsync -l fpsync -r runid [-R] [OPTIONS...] fpsync -a runid fpsync -D runid DESCRIPTION The fpsync tool synchronizes directories in parallel using fpart(1) and rsync(1), cpio(1), pax(1) or tar(1). It computes subsets of src_dir/ and spawns jobs to synchronize them to dst_url/. Synchronization jobs can be executed either locally or remotely (using SSH workers, see option -w) and are executed on-the-fly while filesys- tem crawling goes on. This makes fpsync a good tool for migrating large filesystems. COMMON OPTIONS -t tmpdir Set fpsync temporary directory to tmpdir. This directory re- mains local and does not need to be shared amongst SSH workers when using the -w option. Default: /tmp/fpsync -d shdir Set fpsync shared directory to shdir. This option is mandatory when using SSH workers and set by default to tmpdir when run- ning locally. The specified directory must be an absolute path ; it will be used to handle communications with SSH hosts (sharing partitions and log files) and, as a consequence, must be made available to all participating hosts (e.g. through a r/w NFS mount), including the master one running fpsync. -M mailaddr Send an e-mail to mailaddr after a run. Multiple -space-sepa- rated- addresses can be specified. That option requires the mail(1) client to be installed and configured on the master host running fpsync. -v Verbose mode. Can be be specified several times to increase verbosity level. -h Print help SYNCHRONIZATION OPTIONS -m tool External copy tool used to synchronize files. Currently sup- ported tools are: rsync, cpio, pax, tar, and tarify. Default: rsync. Special tool tarify generates tarballs into destination directory. -T path Specify absolute path of copy tool (guessed by default). If you force a specific path, the copy tool must be present at that path on each worker. That path cannot be changed when re- suming a run. -f files Transfer at most files files or directories per sync job. 0 means unlimited but you must at least specify one file or size limit. Default: 2000 -s size Transfer at most size bytes per sync job. 0 means unlimited but you must at least specify one file or size limit. You can use a human-friendly unit suffix here (k, m, g, t, p). Default: 4294967296 (4 GB) -E Work on a per-directory basis (rsync tool only). In that mode, fpsync works with lists of directories instead of files. That mode may generate coarse-grained lists but enables rsync(1) 's --delete option by default ( WARNING!!! ), making it a good candidate for a final (cleaning) pass after several incremental passes using standard (file) mode. When option -E is specified twice, it enables 'aggressive' mode which isolates erroneous directories and enables recursive synchronization for them. This advanced mode can be useful to try to overcome transcient errors such as Linux SMB client deferring opendir() calls to support compound SMB requests. -o toolopts Override default rsync(1), cpio(1), pax(1) or tar(1) options with toolopts. Use this option with care as certain options are incompatible with a parallel usage (e.g. rsync's --delete). Default for rsync: "-lptgoD -v --numeric-ids". Empty for cpio, pax, tar and tarify. -O fpartopts Override default fpart(1) options with fpartopts. Options and values must be separated by a pipe character. Default: "-x|.zfs|-x|.snapshot*|-x|.ckpt". -S Sudo mode. Use sudo(8) for filesystem crawling and synchro- nizations. src_dir/ Source directory. It must be absolute and available on all participating hosts (including the master one, running fpsync). dst_url/ Destination directory or URL (rsync tool only). If a remote URL is provided, it must be supported by rsync(1). All partic- ipating workers must be able to reach that target. JOB HANDLING AND DISPATCHING OPTIONS -n jobs Start jobs concurrent sync jobs (either locally or remotely, see below) per run. Default: 2 -w wrks Use remote SSH wrks to synchronize files. Synchronization jobs are executed locally when this option is not set. wrks is a space-separated list of login@machine connection strings and can be specified several times. You must be allowed to connect to those machines using a SSH key to avoid user interaction. RUN HANDLING OPTIONS -p Prepare mode: prepare, test synchronization environment, start fpart(1) and create partitions but do not actually start trans- fers. That mode can be used to create a run that can then be resumed using option -r. -l List previous runs and their status. -r runid Resume run runid and restart synchronizing remaining partitions from a previous run. runid is displayed when using verbose mode (see option -v) or prepare mode (option -p) and can be re- trieved afterwards using option -l. Note that filesystem crawling is skipped when resuming a previous run. As a conse- quence, options -m, -f, -s, -E, -o, -O, -S, src_dir/, and dst_url/ are ignored. -R Replay mode: when using option -r, force re-synchronizing run's all partitions instead of remaining ones only. That mode can be useful to skip filesystem crawling when you have to replay a final pass several times and you know directory structure has not changed in the meantime (you may miss files if you use re- play mode with a standard, file-based, run). -a runid Archive run runid (including partition files, logs, queue and work directories) to tmpdir. That option requires the tar(1) client to be installed on the master host running fpsync. -D runid Delete run runid (including partition files, logs, queue and work directories). RUNNING FPSYNC Each fpsync run generates a unique runid, which is displayed in verbose mode (see option -v) and within log files. You can use that runid to resume a previous run (see option -r). fpsync will then restart syn- chronizing data from the parts that were being synchronized at the time it stopped. This unique feature gives the administrator the ability to stop fpsync and restart it later, without having to restart the whole filesystem crawling and synchronization process. Note that resuming is only pos- sible when filesystem crawling step has finished. During synchronization, you can press CTRL-C to interrupt the process. The first CTRL-C prevents new synchronizations from being submitted and the process will wait for current synchronizations to be finished be- fore exiting. If you press CTRL-C again, current synchronizations will be killed and fpsync will exit immediately. When using option -E to enable directory mode and rsync's --delete option, keep in mind that killing rsync processes may lead to a situation where certain files have been updated and others not deleted yet (because the deletion process is postponed using rsync's --delete-after option). On certain systems, CTRL-T can be pressed to get the status of current and remaining parts to be synchronized. This can also be achieved by sending a SIGINFO to the fpsync process. Whether you use verbose mode or not, everything is logged within shdir/log/. EXAMPLES Here are some examples: fpsync -n 4 /usr/src/ /var/src/ Synchronizes /usr/src/ to /var/src/ using 4 local jobs. fpsync -n 2 -w login@machine1 -w login@machine2 -d /mnt/fpsync /mnt/src/ /mnt/dst/ Synchronizes /mnt/src/ to /mnt/dst/ using 2 concurrent jobs ex- ecuted remotely on 2 SSH workers (machine1 and machine2). The shared directory is set to /mnt/fpsync and mounted on the ma- chine running fpsync, as well as on machine1 and machine2. The source directory (/mnt/src/) is also available on those 3 ma- chines, while the destination directory (/mnt/dst/) is mounted on SSH workers only (machine1 and machine2). LIMITATIONS Parallelizing rsync(1) can make several options not usable, such as --delete. If your source directory is live while fpsync is running, you will have to delete extra files from destination directory. This is traditionally done by using a final -offline- rsync(1) pass that will use this option, but you can also use fpsync and option -E to per- form the same task using several workers. fpsync enqueues synchronization jobs on disk, within the tmpdir/queue directory. Be careful to host this queue on a filesystem that can han- dle fine-grained mtime timestamps (i.e. with a sub-second precision) if you want the queue to be processed in order when fpart(1) generates several jobs per second. On FreeBSD, VFS(9) timestamps' precision can be tuned using the 'vfs.timestamp_precision' sysctl. See vfs_timestamp(9). Contrary to rsync(1), fpsync enforces the final '/' on the source di- rectory. It means that directory contents are synchronized, not the source directory itself (i.e. you will not get a subdirectory of the name of the source directory in the target directory after synchroniza- tion). Before starting filesystem crawling, fpsync changes its current working directory to src_dir/ and generates partitions containing relative paths (all starting with './'). This is important to keep in mind when modifying toolopts or fpartopts dealing with file or directory paths. If you want to run fpsync in the background, your shell must support enabling job control without a tty in non-interactive mode. As of this writing, Dash does not support that feature and will send a SIGTTIN to the whole process group, suspending fpsync execution. SEE ALSO cpio(1), fpart(1), mail(1), pax(1), rsync(1), tar(1), sudo(8) AUTHOR, AVAILABILITY Fpsync has been written by Ganael LAPLANCHE and is available under the BSD license on http://contribs.martymac.org BUGS No bug known (yet). FreeBSD ports 15.0 January 27, 2015 FPSYNC(1)
NAME | SYNOPSIS | DESCRIPTION | COMMON OPTIONS | SYNCHRONIZATION OPTIONS | JOB HANDLING AND DISPATCHING OPTIONS | RUN HANDLING OPTIONS | RUNNING FPSYNC | EXAMPLES | LIMITATIONS | SEE ALSO | AUTHOR, AVAILABILITY | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fpsync&sektion=1&manpath=FreeBSD+Ports+15.0>