FreeBSD Manual Pages
GDAL-RASTER-VIEWSHED(1) GDAL GDAL-RASTER-VIEWSHED(1) NAME gdal-raster-viewshed - Compute the viewshed of a raster dataset. Added in version 3.11. SYNOPSIS Usage: gdal raster viewshed [OPTIONS] <INPUT> <OUTPUT> Compute the viewshed of a raster dataset. Positional arguments: -i, --input <INPUT> Input raster dataset [required] -o, --output <OUTPUT> Output raster dataset (created by algorithm) [required] Common Options: -h, --help Display help message and exit --json-usage Display usage as JSON document and exit --config <KEY>=<VALUE> Configuration option [may be repeated] --progress Display progress bar Options: -f, --of, --format, --output-format <OUTPUT-FORMAT> Output format --co, --creation-option <KEY>=<VALUE> Creation option [may be repeated] --overwrite Whether overwriting existing output is allowed -p, --pos, --position <X,Y> or <X,Y,H> Observer position [2..3 values] [required] --target-height <TARGET-HEIGHT> Height of the target above the DEM surface in the height unit of the DEM. (default: 0) --mode <MODE> Sets what information the output contains.. MODE=normal|DEM|ground|cumulative (default: normal) --max-distance <MAX-DISTANCE> Maximum distance from observer to compute visibility. It is also used to clamp the extent of the output raster. --curvature-coefficient <CURVATURE-COEFFICIENT> Coefficient to consider the effect of the curvature and refraction. -b, --band <BAND> Input band (1-based index) (default: 1) --visible-value <VISIBLE-VALUE> Pixel value to set for visible areas (default: 255) --invisible-value <INVISIBLE-VALUE> Pixel value to set for invisible areas (default: 0) --out-of-range-value <OUT-OF-RANGE-VALUE> Pixel value to set for the cells that fall outside of the range specified by the observer location and the maximum distance (default: 0) --dst-nodata <DST-NODATA> The value to be set for the cells in the output raster that have no data. --observer-spacing <OBSERVER-SPACING> Cell Spacing between observers (default: 10) -j, --num-threads <NUM-THREADS> Number of jobs (or ALL_CPUS) (default: 3) Advanced Options: --oo, --open-option <KEY>=<VALUE> Open options [may be repeated] --if, --input-format <INPUT-FORMAT> Input formats [may be repeated] DESCRIPTION gdal raster viewshed creates a binary visibility raster from one band of the input raster elevation model (DEM). The output raster will be of type Byte. Using the DEM or ground values of --mode can also create a minimum visible height raster of type Float64. It uses the method defined in [Wang2000] for a user defined point. Standard options -f, --of, --format, --output-format <OUTPUT-FORMAT> Which output raster format to use. Allowed values may be given by gdal --formats | grep raster | grep + | sort --co <NAME>=<VALUE> Many formats have one or more optional creation options that can be used to control particulars about the file created. For in- stance, the GeoTIFF driver supports creation options to control compression, and whether the file should be tiled. May be repeated. The creation options available vary by format driver, and some simple formats have no creation options at all. A list of op- tions supported for a format can be listed with the --formats command line option but the documentation for the format is the definitive source of information on driver creation options. See Raster drivers format specific documentation for legal cre- ation options for each format. --overwrite Allow program to overwrite existing target file or dataset. Otherwise, by default, gdal errors out if the target file or dataset already exists. -b, --band <band> Select an input band containing the DEM data. Bands are numbered from 1. Only a single band can be used. Only the part of the raster within the specified maximum distance around the observer point is processed. --dst-nodata <value> The value to be set for the cells in the output raster that have no data. NOTE: Currently, no special processing of input cells at a nodata value is done (which may result in erroneous results). -p, --pos, --position <X,Y> or <X,Y,H> The X,Y or X,Y,H(Height) position of the observer (in SRS units for X and Y, and in the height unit of the DEM for H). If the coordinate is outside of the raster, all space between the ob- server and the raster is assumed not to occlude visibility of the raster. (Not supported in cumulative mode.) If H is not specified, it defaults to 2. --target-height <value> The height of the target above the DEM surface in the height unit of the DEM. Default: 0 --max-distance <value> Maximum distance from observer to compute visibility. It is also used to clamp the extent of the output raster. (Not sup- ported in cumulative mode) --curvature-coefficient <value> Coefficient to consider the effect of the curvature and refrac- tion. When calculating visibility between two points (i.e. Line Of Sight or Viewshed), The magnitude of this effect varies with atmospheric conditions and depends on the wavelength. Different applications for calculating visibility use different interchangeable notation to describe this phenomena: Refraction Coefficient, Curvature Coefficient, and Sphere Diameter Factor. gdal_viewshed uses the Curvature Coefficient notation. {CurvCoeff}=1-{RefractionCoeff} Changes in air density curve the light downward causing an ob- server to see further and the earth to appear less curved, as if the sphere (earth) diameter is larger then it actually is. The ratio between that imaginary sphere diameter and the actual sphere diameter is given by the formula: {SphereDiameterFactor}=1/{CurvCoeff}=1/(1-{RefractionCoeff}) For visible light, the standard atmospheric refraction coeffi- cient that is generally used is 1/7. Thus the default value (since GDAL 3.4) for CurvCoeff that gdal_viewshed uses is 0.85714 (=~ 1-1/7) for Earth CRS. Starting with GDAL 3.6, for non-Earth CRS (those whole semi-major axis differs by more than 5% with the one of WGS 84), CurvCoeff default value is 1.0, to account for the no refraction use case. The height of the DEM is corrected according to the following formula: Height_{Corrected}=Height_{DEM}-{CurvCoeff}\frac{{TargetDistance}^2}{SphereDiameter} Typical coefficient values are given in the table below (use Curvature Coeff value for the cc option) +---------------+------------------+-----------------+------------------+ | Use Case | Refraction Coeff | Curvature Coeff | Sphere Diameter | | | | | Factor | +---------------+------------------+-----------------+------------------+ | No Refraction | 0 | 1 | 1 | +---------------+------------------+-----------------+------------------+ | Visible Light | 1/7 | 6/7 (=~0.85714) | 7/6 (=~1.1666) | +---------------+------------------+-----------------+------------------+ | Radio Waves | 0.25 ~ 0.325 | 0.75 ~ 0.675 | 1.33 ~ 1.48 | +---------------+------------------+-----------------+------------------+ | Flat Earth | 1 | 0 | inf | +---------------+------------------+-----------------+------------------+ --invisible-value <value> Pixel value to set for invisible areas. (Not supported in cumu- lative mode) Default: 0 --out-of-range-value <value> Pixel value to set for the cells that fall outside of the range specified by the observer location and the maximum distance. (Not supported in cumulative mode) Default: 0 --visible-value <value> Pixel value to set for visible areas. (Not supported in cumula- tive mode) Default: 255 --mode normal|DEM|ground|cumulative Sets what information the output contains. • normal (the default) returns a raster of type Byte containing visible locations. • DEM and ground return a raster of type Float64 containing the minimum target height for the target to be visible from the DEM surface or ground level respectively. That is to say, if the minimum target height for the target to be visible at a point is h and the value of the input raster at that point is E, for DEM, E + h will be the output value. For ground, h will be output value. Options --target-height, --invisi- ble-value and --visible-value will be ignored. • cumulative creates an eight bit raster the same size as the input raster where each cell represents the relative observ- ability from a grid of observer points. See the --observer-spacing option. --observer-spacing <value> Cell spacing between observers (only supported in cumulative mode). Default: 10 -j, --num-threads <value> Number of jobs to run at once. (only supported in cumulative mode). Default: 3 EXAMPLES Example 1 Screenshot of 2 combined viewshed analysis, with the yellow pixels showing the area that is visible from the both observation locations (the green dots), while the small green area is only visible from one location. [image] Create a viewshed raster with a radius of 500 for a person standing at location (-10147017, 5108065). gdal raster viewshed --max-distance=500 --pos=-10147017,5108065 source.tif destination.tif AUTHOR Even Rouault <even.rouault@spatialys.com> COPYRIGHT 1998-2025 Jul 12, 2025 GDAL-RASTER-VIEWSHED(1)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gdal-raster-viewshed&sektion=1&manpath=FreeBSD+Ports+15.0>