FreeBSD Manual Pages
HYPERHOTP(1) General Commands Manual HYPERHOTP(1) NAME hyperhotp -- program hyperFIDO USB security key HOTP feature SYNOPSIS hyperhotp (check | help | reset) hyperhotp program [-6 | -8] serial_number hex_seed DESCRIPTION The hyperhotp utility programs the HOTP feature of hyperFIDO USB secu- rity keys. The following commands are implemented: check Check if the security key has already been programmed with a token. If yes, print the serial number of the token. help Print a short help text. reset Clear the token programmed into the security key. To confirm the process, press the button on the security key when it is flashing. program [-6 | -8] serial_number hex_seed Program the security key with a token generated from the given 40 digit hexadecimal hex_seed. The token will have the given 8 digit decimal serial_number. To confirm the process, press the button on the security key when it is flashing. The op- tions -6 and -8 select 6-byte or 8-byte tokens respectively with 6-byte tokens being the default. EXIT STATUS The hyperhotp utility exits 0 on success, and >0 if an error occurs. DIAGNOSTICS Failed to reset device: Device reported failure In a reset or program operation, you did not press the button to confirm the operation. Restart the operation and press the button when it flashes. Failed to program device: Device is already programmed. The security key has already been programmed with a token. Erase the token by issu- ing a reset command to reset the device, then retry the program com- mand. Device could not be found, perhaps it's not plugged in? Failed to claim device from kernel Plug the device in. If it is al- ready plugged in, try wiggling the device or plug it into a different port. Make sure hyperhotp has permissions to access the device. Ele- vate privileges or adjust udev(7) rules if necessary. Failed to send ping Failed to check whether key is programmed Failed to reset device: Device reported successful reset, but device is not actually reset Either your security key or the hyperhotp program is defective. Please report this error to the author. SEE ALSO libusb(3), udev(7) HISTORY This is an open re-implementation of the programming software for the HOTP feature of the hyperFIDO security keys. It is based on reverse- engineering the Windows-based programmer available on Hypersecu's website: https://www.hypersecu.com/downloads. AUTHOR Davids Paskevics <davids.paskevics@gmail.com> CAVEATS While I have tested this with my key, I do not know how well it works for other models or even other devices of the same model. Also, while this only issues FIDO commands to the device which have no relation to managing U2F credentials, I cannot claim that this will not accidentally wipe your keys or brick your device. As always, no war- ranty. BUGS Please reports bugs on Github: https://github.com/casept/hyperhotp. If possible, recompile with cmake -DCMAKE_BUILD_TYPE=Debug to have hyperhotp generate a full trace of the communication with the security key. FreeBSD ports 15.0 2022/10/22 HYPERHOTP(1)
NAME | SYNOPSIS | DESCRIPTION | EXIT STATUS | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHOR | CAVEATS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=hyperhotp&sektion=1&manpath=FreeBSD+Ports+15.0>