FreeBSD Manual Pages
LATEXDIFF-VC(1) LATEXDIFF-VC(1) NAME latexdiff-vc - wrapper script that calls latexdiff for different versions of a file under version management (CVS, RCS or SVN) SYNOPSIS latexdiff-vc [ latexdiff-options ] [ latexdiff-vc-options ] -r [rev1] [-r rev2] file1.tex [ file2.tex ...] or latexdiff-vc [ latexdiff-options ] [ latexdiff-vc-options ][ --postscript | --pdf ] old.tex new.tex DESCRIPTION latexdiff-vc is a wrapper script that applies latexdiff to a file, or multiple files under version control (git, subversion (SVN), mercurial (hg), CVS, RCS), and optionally runs the sequence of "latex" and "dvips" or "pdflatex" commands necessary to produce pdf or postscript output of the difference tex file(s). It can also be applied to a pair of files to automatise the generation of difference file in postscript or pdf format. OPTIONS --rcs, --svn, --cvs, --git or --hg Set the version control system used. If no version system is specified, latexdiff-vc will venture a guess. latexdiff-cvs, latexdiff-rcs etc are variants of latexdiff-vc which default to the respective versioning system. However, this default can still be overridden using the options above. Note that hg needs to support the "--root" option (version >= 2.9) -r, -r rev or --revision, --revision=rev Choose revision (under RCS, CVS, SVN, GIT or HG). One or two -r options can be specified, and they result in different behaviour: latexdiff-vc -r file.tex ... compares file.tex with the most recently checked-in version checked. latexdiff-vc -r rev1 file.tex ... compares file.tex with revision rev1. latexdiff-vc -r rev1 -r rev2 file.tex ... compares revisions rev1 and rev2 of file.tex. Multiple files can be specified for all of the above options. All files must have the extensions ".tex", ".bbl", or ".flt", though. latexdiff-vc old.tex new.tex compares two files. The name of the difference file is generated automatically and reported to stdout. -d or --dir -d path or --dir=path Rather than appending the string "diff" and optionally the version numbers given to the output-file, this will prepend a directory name "diff" to the original filename, creating the directory and sub-directories should they not exist already. This is particularly useful in order to clone a complete directory hierarchy. Optionally, a pathname path can be specified, which is prepended instead of "diff". --flatten,--flatten=keep-intermediate If combined with "--git", "--svn" or "--hg" option or the corresponding modes, check out the revisions to compare in a separate temporary directory, and then pass on option "--flatten" to latexdiff. The directory in which "latexdiff-vc" is invoked defines the subtree which will be checked out. Note that if additional files are needed which are not included in the flatten procedure (package files, included graphics), they need to be accessible in the current directory. If you use bibtex, it is recommended to include the ".bbl" file in the version management. From latexdiff-vc >=1.3.4 there is an attempt to create the ".bbl" file by running bibtex in the retrieved subdirectories; note that the bibtex is run in the temporary subdirectories so any .bib or .bst files either need to be under version management, or in the global search paths for bibtex (shell environment variables "BIBINPUTS" and "BSTINPUTS"). The generic usage of this function is : "latexdiff-vc --flatten -r rev1 [-r rev2] master.tex" where master.tex is the project file containing the highest level of includes etc. With "--flatten=keep-intermediate", the intermediate revision snapshots are kept in the current directory (Default is to store them in a temporary directory and delete them after generating the diff file.) --only-changes Post-process the output such that only pages with changes on them are displayed. This requires the use of subtype ZLABEL in latexdiff, which will be set automatically, but any manually set -s option will be overruled (also requires zref package to be installed). This option also disables internal links (as implemented by hyperref package) and graphics markup. (note that this option must be combined with --ps or --pdf to make sense) --force Overwrite existing diff files without asking for confirmation. Default behaviour is to ask for confirmation before overwriting an existing difference file. --run run latex command on diff file after generation of diff file. --dvi run latex and dvixxx commands after generation of diff file. -c configfile =item --config var1=val1,var2=val2,... or -c var1=val1,.. Set configuration variables for latexdiff and latexdiff-vc. The option can be repeated to set different variables (as an alternative to the comma-separated list). Available variables for latexdiff-vc: "LATEXDIFF" latexdiff command (e.g. latexdiff-fast, latexdiff-so). This command should support the options "-draftmode" and "-interaction=batchmode" "LATEX" latex command (e.g. pdflatex, lualatex) "DVI2" Command for conversion of dvi file (e.g. dvips, dvipdf) "BIBTEX" Command replacing bibtex All other config variables are passed to latexdiff. Explicitly set configuration changes always override implicit changes by the following shortcut options --fast, --so, --ps and --pdf. --fast or --so Use "latexdiff-fast" or "latexdiff-so", respectively (instead of "latexdiff"). --ps or --postscript Generate postscript output from difference file. This will run the sequence "latex; latex; dvips" on the difference file (do not use this option in the rare cases, where three "latex" commands are required if you care about correct referencing). If the difference file contains a "\bibliography" tag, run the sequence "latex; bibtex; latex; latex; dvips". --pdf Generate pdf output from difference file using "pdflatex". This will run the sequence "pdflatex; pdflatex" on the difference file, or "pdflatex; bibtex; pdflatex; pdflatex" for files requiring bibtex. Note that this is not just a shortcut for setting configuration variable but also triggers some special behaviour. --show-config Show values of configuration variables. --help or -h Show help text --version Show version number All other options are passed on to "latexdiff". Note that it is not always easy for latexdiff to correctly assign arguments to options when short form (single letter) options are used so it is recommended to use long-form options. SEE ALSO latexdiff PORTABILITY latexdiff-vc uses external commands and is therefore dependent on the system architecture; it has been tested mainly on Unix-like systems. It also requires a version control system and latex to be installed on the system to make use of all features. Modules from Perl 5.8 or higher are required. BUG REPORTING Please submit bug reports using the issue tracker of the github repository page https://github.com/ftilmann/latexdiff.git, or send them to tilmann -- AT -- gfz-potsdam.de. Include the version number of latexdiff-vc (option "--version"). AUTHOR Version 1.3.4a Copyright (C) 2005-2017 Frederik Tilmann This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License Version 3 Contributors: S Utcke, H Bruyninckx; some ideas have been inspired by git-latexdiff bash script. C. Junghans: Mercurial Support. perl v5.34.0 2024-07-20 LATEXDIFF-VC(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | PORTABILITY | BUG REPORTING | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=latexdiff-vc&sektion=1&manpath=FreeBSD+Ports+15.0>