FreeBSD Manual Pages
LIEBERT-GXE(8) NUT Manual LIEBERT-GXE(8) NAME liebert-gxe - Driver for Liebert GXE series UPS, using the YDN23 serial protocol SYNOPSIS liebert-gxe -h liebert-gxe -a UPS_NAME [OPTIONS] Note This man page only documents the hardware-specific features of the liebert-gxe driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE Tested to work on the following units: • Liebert GXE 01k00TS1101C00 Note This UPS has an RS-232 port and a USB port. The USB port has an ACM interface which functions as a serial port for the host operating system. Both ports can be used managing the device. This is an experimental driver. You have been warned. EXTRA ARGUMENTS This driver supports the following optional settings in ups.conf(5): addr=num Set the address of the UPS -- 01 (default) ~ 99. retry=num Set the max times of read failures. (UPS sometimes ignores the incoming command and causes driver stales. The driver will ignore retry failures if occurred in a row. However, this does increase the latency if a real stale happened. Default to 3) AUTHORS • Gong Zhile <goodspeed at mailo.cat> SEE ALSO The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: https://www.networkupstools.org/ Network UPS Tools 2.8.4. 11/02/2025 LIEBERT-GXE(8)
NAME | SYNOPSIS | SUPPORTED HARDWARE | EXTRA ARGUMENTS | AUTHORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=liebert-gxe&sektion=8&manpath=FreeBSD+Ports+15.0>