FreeBSD Manual Pages
mkbitmap(1) General Commands Manual mkbitmap(1) NAME mkbitmap - transform images into bitmaps with scaling and filtering SYNOPSIS mkbitmap [options] [filename...] DESCRIPTION mkbitmap reads an image, and applies one or more of the following oper- ations to it, in this order: inversion, highpass filtering, scaling, and thresholding. Each operation can be individually controlled and turned on or off. The principal use of mkbitmap is to convert color or greyscale images into a format suitable as input for other programs, particularly the tracing program potrace(1). It is particularly useful for converting scanned line art, such as cartoons, handwritten text, etc., to high- resolution bilevel images. Highpass filtering can be used to ensure that foreground features such as lines and text are preserved, while at the same time compensating for uneven background. Optional blurring can be applied to smooth out the image and remove visual noise. Scaling is important because a scanned greyscale image contains more visual detail than a bilevel im- age at the same resolution. By scaling the image to a higher resolution (using interpolation) before thresholding it, some of this detail is preserved. Thresholding means converting a greyscale image to a bilevel image using only black and white pixels. Pixels that are darker than a certain threshold value are converted to black. Optional inversion is useful if the input image shows bright features on dark background, such as a picture of chalk drawings on a blackboard. Supported input formats are PNM (PBM, PGM, PPM) and BMP. The output formats are PBM for bitmaps, and PGM for greymaps. OPTIONS General options: -h, --help print help message and exit. -v, --version print version info and exit. -l, --license print license info and exit. Input/output options: filename If filename arguments are given, then mkbitmap will by default create one output file for each input filename given. The name of the output file is obtained from the input filename by changing its suffix to ".pbm" or ".pgm". If the name of the input file and output file would be identical, then an additional suffix "-out" is appended to the output filename. If no filename argu- ments are given, then mkbitmap acts as a filter, reading from standard input and writing to standard output. A filename of "-" may be given to specify reading from standard input; the output for this argument will then be written to standard output. Each input file may con- tain one or more images. -o filename, --output filename write output to this file. All output is concatenated and directed to the specified file. This overrides the default behavior of creating one output file for each input file. A filename of "-" may be given to specify writing to standard output. Image processing options: -x, --nodefaults Turn off default options. Normally, the following op- tions are preselected by default: -f 4 -s 2 -3 -t 0.45. The -x option disables these defaults; thus, mkbitmap -x does nothing but copy a greyscale image from the input to the output. Other processing options can then be added one by one; e.g., mkbitmap -xf10 does only high- pass filtering, mkbitmap -xt0.5 does only thresholding, etc. -i, --invert Invert the input image. If this option is chosen, it is applied to the image before any other operation. It is used to deal with white-on-black images, such as pho- tographs of chalk drawings on a blackboard. Note that the behavior of this option is not in general the same as inverting the output bitmap, unless the thresholding value is also inverted. -f n, --filter n Apply a highpass filter to the image. This filter is ap- proximately Gaussian and non-directional. The effect is to preserve small detail while compensating for back- ground gradients. The parameter n is a radius (in pix- els) which corresponds approximately to the size of de- tails which should be preserved. More precisely, the filter is implemented by subtracting a blurred version of the image from the original image. The parameter n is equal to the standard deviation of the blur. The output of the filtering step is a normalized image whose aver- age brightness is exactly 0.5. The default filter radius is 4. -n, --nofilter Turn off highpass filtering. -b n, --blur n Blur the image. The effect is to smooth out fine details and to reduce visual noise in the image. The parameter n is the blurring radius, and should be chosen small (1 is a good value to start with). This is implemented as an approximately Gaussian, non-directional blur with stan- dard deviation proportional to n. Blurring is applied after the highpass filter, but before scaling and thresholding. If this option is not given, the default is not to apply any blurring. -s n, --scale n Scale the image by an integer factor n>0. Scaling is done after highpass filtering, but before the threshold- ing step. A scaling factor of 1 indicates that no scal- ing is to be done. Otherwise, interpolation is used to fill in the in-between pixels. If the output of mkbitmap is to be used as input to a tracing program such as po- trace, a scaling factor of 2 is recommended. This pre- served the right amount of detail for the tracing algo- rithm to work well. If a scaling factor of 1 is used, too much detail is lost. If a scaling factor of 3 or higher is used, the interpolation tends to "invent" de- tail which was not present in the original image, thus preventing potrace from doing a good job. -1, --linear Use linear interpolation when scaling to a higher reso- lution. This is slightly faster, but less nice, than the default cubic interpolation. -3, --cubic Use cubic interpolation when scaling to a higher resolu- tion. This is the default. It is slower than linear in- terpolation, but leads to better results. -t n, --threshold n Set the threshold grey value for bilevel conversion. The parameter n is a brightness value between 0 for black and 1 for white. Any pixels below this brightness will be converted to black (thus, smaller values of n will lead to whiter output). -g, --grey Disable bilevel conversion. If this option is given, processing stops after the scaling step and a greymap is output. EXIT STATUS The exit status is 0 on successful completion, 1 if the command line was invalid, and 2 on any other error. VERSION 1.16 AUTHOR Peter Selinger <selinger at users.sourceforge.net> WEB SITE AND SUPPORT mkbitmap is distributed as part of the potrace package, and the latest version is available from http://potrace.sourceforge.net/. This site also contains documentation and information on how to obtain support. SEE ALSO potrace(1) COPYRIGHT Copyright (C) 2001-2019 Peter Selinger This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MER- CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. See also http://www.gnu.org/. Version 1.16 September 2019 mkbitmap(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | VERSION | AUTHOR | WEB SITE AND SUPPORT | SEE ALSO | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mkbitmap&sektion=1&manpath=FreeBSD+Ports+15.0>