FreeBSD Manual Pages
Bino(1) General Commands Manual Bino(1) NAME Bino - a 3D video player with multi-display support. SYNOPSIS bino [option...] [file...] DESCRIPTION Bino plays stereoscopic videos, also known as 3D videos. Such videos have separate views for the left and right eye and thus allow depth perception through stereopsis. All input files are combined into one media source, so you can have video, audio, and subtitle streams in separate files. The files are de- coded with the FFmpeg libraries, so URLs and other special constructs are supported. --help Print help. --version Print version. -n|--no-gui Do not use the GUI, just play the given input in a plain window using the parameters given on the command line. --log-file=FILE Append all log messages to the given file. -L|--log-level=LEVEL Select log level: debug, info, warning, error, or quiet. --list-audio-devices Print a list of known audio devices and exit. -A|--audio-device=N Use audio device number N. N=0 is the default device. -D|--audio-delay=D Delay audio by D milliseconds. Default is 0. -V|--audio-volume=V Set audio volume (0 to 1). Default is 1. -m|--audio-mute Mute audio. --device-type=TYPE Type of input device: default, firewire, or x11. --device-frame-size=WxH If the input is a device, request the given frame size, e.g. 640x480. --device-frame-rate=N/D If the input is a device, request the given frame rate, e.g. 25/1. --device-format=FORMAT Request format default or mjpeg from device. --read-commands=FILE Read commands from file. --lirc-config=FILE Use the given LIRC configuration file. This option can be used more than once. --quality=Q Set rendering quality, from 0 (fastest) to 4 (best, default). -v|--video=STREAM Select video stream (1-n, depending on the input). -a|--audio=STREAM Select audio stream (1-n, depending on the input). -s|--subtitle=STREAM Select subtitle stream (1-n, depending on the input). -i|--input=TYPE Select input type. mono Single view. separate-left-right Left/right view in separate streams, left first. separate-right-left Left/right view in separate streams, right first. alternating-left-right Left/right alternating, left first. alternating-right-left Left/right alternating, right first. top-bottom Left view top, right view bottom. top-bottom-half Left view top, right view bottom, half height. bottom-top Left view bottom, right view top. bottom-top-half Left view bottom, right view top, half height. left-right Left view left, right view right. left-right-half Left view left, right view right, half width. right-left Left view right, right view left. right-left-half Left view right, right view left, half width. even-odd-rows Left view even rows, right view odd rows. odd-even-rows Left view odd rows, right view even rows. The default is to autodetect the input type from meta data stored in the file. If this fails, Bino tries to autodetect the input type based on the file name, by looking at the last part of the file name before the file name extension (.ext). If that fails, too, Bino guesses based on the resolution of the input. The following file name forms are recognized: *-lr.ext left-right *-lrh.ext or *-lrq.ext left-right-half *-rl.ext left-right swapped *-rlh.ext or *-rlq.ext left-right-half swapped *-tb.ext or *-ab.ext top-bottom *-tbh.ext or *-abq.ext top-bottom-half *-bt.ext or *-ba.ext top-bottom swapped *-bth.ext or *-baq.ext top-bottom-half swapped *-eo.ext or *-eoq.ext or *-3dir.ext even-odd-rows *-oe.ext or *-oeq.ext or *-3di.ext even-odd-rows swapped *-2d.ext mono -o|--output=TYPE Select output type. stereo OpenGL quad-buffer stereo. alternating Left and right view alternating. mono-left Left view only. mono-right Right view only. top-bottom Left view top, right view bottom. top-bottom-half Left view top, right view bottom, half height. left-right Left view left, right view right. left-right-half Left view left, right view right, half width. even-odd-rows Left view even rows, right view odd rows. even-odd-columns Left view even columns, right view odd columns. checkerboard Left and right view in checkerboard pattern. hdmi-frame-pack HDMI frame packing mode (left top, right bottom, plus ex- tra blank lines separating the two views). This mode is only necessary if you are forcing your display into the corresponding HDMI 3D mode. red-cyan-monochrome Red/cyan anaglyph, monochrome method. red-cyan-half-color Red/cyan anaglyph, half color method. red-cyan-full-color Red/cyan anaglyph, full color method. red-cyan-dubois Red/cyan anaglyph, high-quality Dubois method. green-magenta-monochrome Green/magenta anaglyph, monochrome method. green-magenta-half-color Green/magenta anaglyph, half color method. green-magenta-full-color Green/magenta anaglyph, full color method. green-magenta-dubois Green/magenta anaglyph, high-quality Dubois method. amber-blue-monochrome Amber/blue anaglyph, monochrome method. amber-blue-half-color Amber/blue anaglyph, half color method. amber-blue-full-color Amber/blue anaglyph, full color method. amber-blue-dubois Amber/blue anaglyph, high-quality Dubois method. red-green-monochrome Red/green anaglyph, monochrome method. red-blue-monochrome Red/blue anaglyph, monochrome method. equalizer Multi-display OpenGL via Equalizer with a 2D canvas setup. equalizer-3d Multi-display OpenGL via Equalizer with a 3D screen setup. For stereo input, the default is stereo if the display supports it, otherwise red-cyan-dubois. The default for mono input is mono-left. -S|--swap-eyes Swap left/right view. -f|--fullscreen Fullscreen. --fullscreen-screens=[S0[,S1[,...]]] Use the listed screens S0, ..., Sn in fullscreen mode. Screen numbers start with 1. If the list is empty, the primary screen will be used (this is the default). --fullscreen-flip-left Flip left view vertically when in fullscreen mode. --fullscreen-flop-left Flop left view horizontally when in fullscreen mode. --fullscreen-flip-right Flip right view vertically when in fullscreen mode. --fullscreen-flop-right Flop right view horizontally when in fullscreen mode. --fullscreen-3dr-sync Use DLP(R) 3-D Ready Sync when in fullscreen mode. -z|--zoom=Z Set zoom for videos that are wider than the screen, from 0 (off; show full video width) to 1 (full; use full screen height). The default is 0. -C|--crop=W:H Crop the video to the given aspect ratio, to remove borders. 0:0 disables cropping. -c|--center Center window on screen. --subtitle-encoding=ENC Set subtitle encoding. --subtitle-font=FONT Set subtitle font name. --subtitle-size=N Set subtitle font size. --subtitle-scale=S Set subtitle scale factor. --subtitle-color=COLOR Set subtitle color, in [AA]RRGGBB format. --subtitle-shadow=-1|0|1 Set subtitle shadow, -1=default, 0=off, 1=on. --subtitle-parallax=VAL Subtitle parallax adjustment (-1 to +1). -P|--parallax=VAL Parallax adjustment (-1 to +1). --crosstalk=VAL Crosstalk leak level (0 to 1). Comma-separated values for the R,G,B channels. --ghostbust=VAL Amount of crosstalk ghostbusting to apply (0 to 1). -b|--benchmark Benchmark mode: no audio, no time synchronization, output of frames-per-second measurements. --swap-interval=D Frame rate divisor relative to display refresh rate. The default is 0 for benchmark mode and 1 otherwise. -l|--loop Loop the input media. INTERACTIVE CONTROL ESC Leave fullscreen mode, or quit when in window mode. q Quit. p or SPACE Pause / unpause. f Toggle fullscreen. c Center window. e or F7 Swap left/right eye. v Cycle through available video streams. a Cycle through available audio streams. s Cycle through available subtitle streams. 1, 2 Adjust contrast. 3, 4 Adjust brightness. 5, 6 Adjust hue. 7, 8 Adjust saturation. [, ] Adjust parallax. (, ) Adjust ghostbusting. <, > Adjust zoom for videos that are wider than the screen. /, * Adjust audio volume. m Toggle audio mute. . Step a single video frame forward. left, right Seek 10 seconds backward / forward. down, up Seek 1 minute backward / forward. page down, page up Seek 10 minutes backward / forward. Mouse click Seek according to the horizontal click position. Media Keys Media keys (if available) should work as expected. AUTHORS The Bino developers. SEE ALSO ffmpeg(1) 2014-09 Bino(1)
NAME | SYNOPSIS | DESCRIPTION | INTERACTIVE CONTROL | AUTHORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=bino&sektion=1&manpath=FreeBSD+Ports+15.0.quarterly>