FreeBSD Manual Pages
dnssec-zkt(8) dnssec-zkt(8) NAME dnssec-zkt -- Secure DNS zone key tool SYNOPSYS dnssec-zkt [-V|--view view] [-c file] [-l list] [-adefhkLrptz] [{keyfile|dir} ...] dnssec-zkt -C<label> [-V|--view view] [-c file] [-krpz] [{keyfile|dir} ...] dnssec-zkt --create=<label> [-V|--view view] [-c file] [-krpz] [{keyfile|dir} ...] dnssec-zkt -{P|A|D|R}<keytag> [-V|--view view] [-c file] [-r] [{keyfile|dir} ...] dnssec-zkt --published=<keytag> [-V|--view view] [-c file] [-r] [{keyfile|dir} ...] dnssec-zkt --active=<keytag> [-V|--view view] [-c file] [-r] [{keyfile|dir} ...] dnssec-zkt --depreciate=<keytag> [-V|--view view] [-c file] [-r] [{keyfile|dir} ...] dnssec-zkt --rename=<keytag> [-V|--view view] [-c file] [-r] [{keyfile|dir} ...] dnssec-zkt --destroy=<keytag> [-V|--view view] [-c file] [-r] [{keyfile|dir} ...] dnssec-zkt -T [-V|--view view] [-c file] [-l list] [-hr] [{keyfile|dir} ...] dnssec-zkt --list-trustedkeys [-V|--view view] [-c file] [-l list] [-hr] [{keyfile|dir} ...] dnssec-zkt -K [-V|--view view] [-c file] [-l list] [-hkzr] [{keyfile|dir} ...] dnssec-zkt --list-dnskeys [-V|--view view] [-c file] [-l list] [-hkzr] [{keyfile|dir} ...] dnssec-zkt -Z [-V|--view view] [-c file] dnssec-zkt --zone-config [-V|--view view] [-c file] dnssec-zkt -9 | --ksk-rollover dnssec-zkt -1 | --ksk-roll-phase1 do.ma.in. [-V|--view view] [-c file] dnssec-zkt -2 | --ksk-roll-phase2 do.ma.in. [-V|--view view] [-c file] dnssec-zkt -3 | --ksk-roll-phase3 do.ma.in. [-V|--view view] [-c file] dnssec-zkt -0 | --ksk-roll-stat do.ma.in. [-V|--view view] [-c file] DESCRIPTION The dnssec-zkt command is a wrapper around dnssec-keygen(8) to assist in dnssec zone key management. In the common usage the command prints out information about all dnssec (zone) keys found in the given (or predefined default) directory. It is also possible to specify keyfiles (K*.key) as arguments. With option -r subdirectories will be searched recursively, and all dnssec keys found will be listed sorted by domain name, key type and generation time. In that mode the use of the -p option may be helpful to find the location of the keyfile in the directory tree. Other forms of the command print out keys in a format suitable for a trusted-key section or as a DNSKEY resource record. The command is also useful in dns key management. It offers monitoring of key lifetime and modification of key status. GENERAL OPTIONS -V view, --view=view Try to read the default configuration out of a file named dnssec-<view>.conf . Instead of specifying the -V or --view option every time, it is also possible to create a hard or softlink to the executable file to give it an additional name like dnssec-zkt-<view> . -c file, --config=file Read default values from the specified config file. Otherwise the default config file is read or build in defaults will be used. -O optstr, --config-option=optstr Set any config file option via the commandline. Several config file options could be specified at the argument string but have to be delimited by semicolon (or newline). -l list Print out information solely about domains given in the comma or space separated list. Take care of, that every domain name has a trailing dot. -d, --directory Skip directory arguments. This will be useful in combination with wildcard arguments to prevent dnsssec-zkt to list all keys found in subdirectories. For example "dnssec-zkt -d *" will print out a list of all keys only found in the current directory. Maybe it is easier to use "dnssec-zkt ." instead (without -r set). The option works similar to the -d option of ls(1). -L, --left-justify Print out the domain name left justified. -k, --ksk Select and print key signing keys only (default depends on command mode). -z, --zsk Select and print zone signing keys only (default depends on command mode). -r, --recursive Recursive mode (default is off). Also settable in the dnssec.conf file (Parameter: Recursive). -p, --path Print pathname in listing mode. In -C mode, don't create the new key in the same directory as (already existing) keys with the same label. -a, --age Print age of key in weeks, days, hours, minutes and seconds (default is off). Also settable in the dnssec.conf file (Parameter: PrintAge). -f, --lifetime Print the key lifetime. -F, --setlifetime Set the key lifetime of all the selected keys. Use option -k, -z, -l or the file and dir argument for key selection. -e, --exptime Print the key expiration time. -t, --time Print the key generation time (default is on). Also settable in the dnssec.conf file (Parameter: PrintTime). -h No header or trusted-key section header and trailer in -T mode COMMAND OPTIONS -H, --help Print out the online help. -T, --list-trustedkeys List all key signing keys as a named.conf trusted-key section. Use -h to supress the section header/trailer. -K, --list-dnskeys List the public part of all the keys in DNSKEY resource record format. Use -h to suppress comment lines. -C zone, --create=zone Create a new zone signing key for the given zone. Add option -k to create a key signing key. The key algorithm and key length will be examined from built-in default values or from the parameter settings in the dnssec.conf file. The keyfile will be created in the current directory if the -p option is specified. -R keyid, --revoke=keyid Revoke the key signing key with the given keyid. A revoked key has bit 8 in the flags filed set (see RFC5011). The keyid is the numeric keytag with an optionally added zone name separated by a colon. --rename="keyid Rename the key files of the key with the given keyid (Look at key file names starting with an lower 'k'). The keyid is the numeric keytag with an optionally added zone name separated by a colon. --destroy=keyid Deletes the key with the given keyid. The keyid is the numeric keytag with an optionally added zone name separated by a colon. Beware that this deletes both private and public keyfiles, thus the key is unrecoverable lost. -P|A|D keyid, --published=keyid, --active=keyid, --depreciated=keyid Change the status of the given dnssec key to published (-P), active (-A) or depreciated (-D). The keyid is the numeric keytag with an optionally added zone name separated by a colon. Setting the status to "published" or "depreciate" will change the filename of the private key file to ".published" or ".depreciated" respectivly. This prevents the usage of the key as a signing key by the use of dnssec-signzone(8). The time of status change will be stored in the 'mtime' field of the corresponding ".key" file. Key activation via option -A will restore the original timestamp and file name (".private"). -Z, --zone-config Write all config parameters to stdout. The output is suitable as a template for the dnssec.conf file, so the easiest way to create a dnssec.conf file is to redirect the standard output of the above command. Pay attention not to overwrite an existing file. --ksk-roll-phase[123] do.ma.in. Initiate a key signing key rollover of the specified domain. This feature is currently in experimental status and is mainly for the use in an hierachical environment. Use --ksk-rollover for a little more detailed description. SAMPLE USAGE dnssec-zkt -r . Print out a list of all zone keys found below the current directory. dnssec-zkt -Z -c "" Print out the compiled in default parameters. dnssec-zkt -C example.net -k -r ./zonedir Create a new key signing key for the zone "example.net". Store the key in the same directory below "zonedir" where the other "example.net" keys live. dnssec-zkt -T ./zonedir/example.net Print out a trusted-key section containing the key signing keys of "example.net". dnssec-zkt -D 123245 -r . Depreciate the key with tag "12345" below the current directory, dnssec-zkt --view intern Print out a list of all zone keys found below the directory where all the zones of view intern live. There should be a seperate dnssec config file dnssec-intern.conf with a directory option to take affect of this. dnssec-zkt-intern Same as above. The binary file dnssec-zkt has another link, named dnssec-zkt-intern made, and dnssec-zkt examines argv[0] to find a view whose zones it proceeds to process. ENVIRONMENT VARIABLES ZKT_CONFFILE Specifies the name of the default global configuration files. FILES /etc/namedb/dnssec.conf Built-in default global configuration file. The name of the default global config file is settable via the environment variable ZKT_CONFFILE. /etc/namedb/dnssec-<view>.conf View specific global configuration file. ./dnssec.conf Local configuration file (only used in -C mode). BUGS Some of the general options will not be meaningful in all of the command modes. The option -l and the ksk rollover options insist on domain names ending with a dot. AUTHORS Holger Zuleger, Mans Nilsson COPYRIGHT Copyright (c) 2005 - 2008 by Holger Zuleger. Licensed under the BSD Licences. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. SEE ALSO dnssec-keygen(8), dnssec-signzone(8), rndc(8), named.conf(5), dnssec- signer(8), RFC4641 "DNSSEC Operational Practices" by Miek Gieben and Olaf Kolkman, DNSSEC HOWTO Tutorial by Olaf Kolkman, RIPE NCC (http://www.nlnetlabs.nl/dnssec_howto/) ZKT 0.99b August 1, 2009 dnssec-zkt(8)
NAME | SYNOPSYS | DESCRIPTION | GENERAL OPTIONS | COMMAND OPTIONS | SAMPLE USAGE | ENVIRONMENT VARIABLES | FILES | BUGS | AUTHORS | COPYRIGHT | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dnssec-zkt&sektion=8&manpath=FreeBSD+Ports+15.0.quarterly>