FreeBSD Manual Pages
MIMEDEFANG-MULTIPLEXOR(8) System Manager's Manual MIMEDEFANG-MULTIPLEXOR(8) NAME mimedefang-multiplexor - Process pool controller for mail filters. SYNOPSIS mimedefang-multiplexor [options] DESCRIPTION mimedefang-multiplexor manages a pool of Perl processes for scanning e- mail. It is designed to work in conjunction with mimedefang(8) and mimedefang.pl(8). mimedefang-multiplexor opens a UNIX-domain socket and listens for re- quests for work from mimedefang. As requests come in, mimedefang-mul- tiplexor creates Perl processes as needed to scan mail. The Perl processes are not killed when scanning is completed, but continue to run in a loop. Perl processes are re-used for subsequent e-mail mes- sages. This eliminates the large overhead of starting a new Perl process for each incoming message. To avoid memory leaks, the Perl processes are killed after they have handled some number of scans. OPTIONS -U user Runs the multiplexor as user rather than root. This option is mandatory, and must match the -U option supplied to mimedefang. -m minWorkers The minimum number of Perl processes to keep running at all times. The default is zero. -x maxWorkers The maximum number of Perl processes to run simultaneously. If a request comes in and all processes are busy, a temporary fail- ure is signalled to the SMTP peer. The default is 2. -r maxRequests The maximum number of requests a given process handles before it is killed and a replacement started. The default is 500. -i idleTime The idle time in seconds after which to kill of excess Perl processes. That is, if the process is idle for longer than this time, and there are more than minWorkers running, the process is killed. Note that this is implemented as a timer which ticks every idleTime seconds; therefore, processes may be idle for up to twice this time before they are killed. The default for idleTime is 300 seconds. -V maxLifetime The maximum lifetime in seconds of a worker before it is killed and a replacement started. The default is -1, which signifies no maximum lifetime. Note that the lifetime check is done only when a worker becomes idle after a request, or every time the idle-timeout check is made. On a very quiet system, workers may live for longer than maxLifetime by as much as idleTime. Note also that the lifetime is measured not from when the worker started running, but from when it was assigned its very first request. A completely-idle worker that has never processed any requests will not be terminated by the maxLifetime setting. -b busyTime The longest a Perl process is allowed to spend scanning an e- mail before it is declared hung up and killed. The default is 120 seconds. -Z This option specifies that the multiplexor should accept and process "status updates" from busy workers. Note that this con- sumes one extra file descriptor per worker, plus a small amount of CPU time per status update. -c cmdTime The timeout for communication between mimedefang-multiplexor and mimedefang, or between mimedefang-multiplexor and a Perl scan- ning process. The default is 10 seconds. This timeout should be kept quite short. -w waitTime When mimedefang-multiplexor starts the initial workers, or needs to bring the number of running workers up to the number defined by the -m option, it does not start all the workers at once, be- cause this could overload your server. Instead, it starts one worker every waitTime seconds. The default value for waitTime is 3. -W waitTime If you use this option, mimedefang-multiplexor will never acti- vate a worker until waitTime seconds have elapsed since the last worker activation. This could result in mail being tempfailed if worker activations do not keep pace with incoming mail. How- ever, it may be preferable to tempfail mail rather than allow the load on your server to spike up too quickly. The default value for this option is 0, meaning that mimedefang-multiplexor will start workers as quickly as necessary to keep up with in- coming mail. -z spooldir Set the spool directory to spooldir. If this option is omitted, the spool directory defaults to /var/spool/MIMEDefang. -s pathName The UNIX-domain socket on which mimedefang-multiplexor listens for requests. This should be specified as an absolute pathname. If this option is not supplied, it defaults to mimedefang-multi- plexor.sock under the spool directory. -a socket A socket for listening for requests. This is similar to the -s socket, except that a restricted set of requests are processed. On this socket, the multiplexor will only process requests ask- ing for status; it will not accept any commands to do scanning or that would consume a worker. See the SOCKET SPECIFICATION section for the format of socket. -p fileName Causes mimedefang-multiplexor to write its process-ID (after be- coming a daemon) to the specified file. The file will be owned by root. -o fileName Causes mimedefang-multiplexor to use fileName as a lock file to avoid multiple instances from running. If you supply -p but not -o, then mimedefang-multiplexor constructs a lock file by ap- pending ".lock" to the pid file. However, this is less secure than having a root-owned pid file in a root-owned directory and a lock file writable by the user named by the -U option. (The lock file must be writable by the -U user.) -f filter_path Normally, mimedefang-multiplexor executes a Perl filter script called mimedefang.pl to scan the e-mail. However, you can have it execute any program you like by specifying the full path to the program with the -f option. This program must obey the pro- tocol documented in mimedefang-protocol(7); see that manual page for details. Note that the -f option does not specify the "filter" to use with mimedefang.pl; instead, it specifies the program for mimedefang-multiplexor to execute. You almost certainly should not use this option unless you wish to replace mimedefang.pl with your own program. -F rules_path Specifies the path to the filter rules. By default, /usr/lo- cal/etc/mimedefang/mimedefang-filter is used. If you use the -F option, its value is passed to the underlying Perl filter pro- gram using -f. -l Log certain events, including the output of the Perl workers' standard-error, using syslog. Normally, the multiplexor does not log much information. -d Write debugging information about event-handling code in /var/log/mimedefang-event-debug.log. This is only of use to people debugging mimedefang-multiplexor. -R kbytes Limits the resident-set size of the worker filter processes to kbytes kilobytes. This limit is not supported on all operating systems; it is known to work on Linux. -M kbytes Limits the total memory space of worker filter processes to kbytes kilobytes. This limit is supported on all operating sys- tems which support the setrlimit(2) system call. This should include most modern UNIX systems. We recommend that you monitor your worker filter processes and get a feel for how much memory they use. You should then limit the memory to two or three times the worst-case that you have observed. This can help mitigate denial-of-service attacks which use complicated MIME messages to force mimedefang.pl to consume lots of memory. -h Print usage information and exit. -t filename Log statistical information to filename. See the section STA- TISTICS for more information. -T Log statistical information using syslog(2). You may use any -t and -T together, in which case statistical information is logged in a file and using syslog. -u Flush the statistics file after every write. Normally, mimede- fang-multiplexor does not flush the file; this is the best choice for minimizing disk I/O on a busy mail server. However, if you wish to watch statistics entries in real-time, you should enable flushing. -D Do not fork into the background and become a daemon. Instead, stay in the foreground. Useful mainly for debugging or if you have a supervisory process managing mimedefang-multiplexor. -q queue_size Normally, if all workers are busy and mimedefang-multiplexor re- ceives another request, it fails it with the error "No free workers." However, if you use the -q option, then up to queue_size requests will be queued. As soon as a worker becomes free, the queued requests will be handed off in FIFO order. If the queue is full and another request comes in, then the request is failed with "No free workers". -Q queue_timeout Queued requests should not stay on the queue indefinitely. If a queued request cannot be processed within queue_timeout (default 30) seconds of being placed on the queue, it is failed with a "Queued request timed out" message. See the section "QUEUEING REQUESTS" for more discussion. -O sock Listen on a notification socket for connections from listeners. mimedefang-multiplexor can inform external programs of state changes by sending messages over a notification socket. The ex- ternal programs connect to this socket and then listen for noti- fications. See the section SOCKET SPECIFICATION for the format of sock. See the mimedefang-notify(7) man page for details of the notifi- cation protocol. -N map_sock Listen on a map socket for Sendmail SOCKETMAP connections. As of Sendmail 8.13, you can define a Sendmail map type that talks to a daemon over a socket. mimedefang-multiplexor implements that protocol; consult the mimedefang-filter(5) man page for de- tils (see the SOCKET MAPS section). See the section SOCKET SPECIFICATION for the format of map_sock. -I backlog When mimedefang-multiplexor creates a listening socket, it cal- culates the "backlog" argument to listen(2) based on the maximum number of workers. However, you can explicitly set this backlog with the -I option. Setting the backlog to a high value (around 30-50) may help on a very busy server. If you see mail log mes- sages saying "MXCommand: socket: Connection refused" during busy periods, then that's an indication you need a higher listen backlog. -L interval Log the worker status every interval seconds. This logs a line using syslog; the line looks like this: Worker status: Stopped=s Idle=i Busy=b Killed=k Queued=q Msgs=m Activations=a Here, "Stopped" is the number of non-running workers, "Idle" is the number of idle workers, "Busy" is the number of busy work- ers, "Killed" is the number of killed workers yet to be reaped, "Queued" is the number of queued requests, "Msgs" is the total number of messages processed since the multiplexor began run- ning, and "Activations" is the number of times a Perl process has been started since the multiplexor began running. If you supply an interval of 0 (which is the default), no peri- odic status logging is performed. If you supply an interval of less than 5 seconds, it is silently reset to 5 seconds. -S facility Specifies the syslog facility for log messages. The default is mail. See openlog(3) for a list of valid facilities. You can use either the short name ("mail") or long name ("LOG_MAIL") for the facility name. -E Specifies that the multiplexor should create an embedded Perl interpreter. This can improve performance dramatically. But see the section "EMBEDDING PERL" for more information. -X n Specifies that the multiplexor should initiate a "tick" request every n seconds. This causes your filter_tick function (if de- fined) to be called. Note that you have no control over which worker executes filter_tick. If all workers are busy when a tick occurs, that tick request is skipped and a warning message is logged. -P n Specifies that the multiplexor should run n tick requests in parallel. Each tick is run as often as specified with the -X argument. (If you omit the -P option, then the multiplexor be- haves as if -P 1 had been specified.) If you run parallel ticks, each tick is assigned an integer identifying its "type". The type ranges from 0 to n-1. While there may be as many as n tick requests running at a time, only one tick of each type will be active at any time. -Y label Sets the tag used in the multiplexor's syslog messages to label instead of mimedefang-multiplexor. -G Normally, mimedefang-multiplexor uses a umask of 027 when creat- ing listening sockets. If you would like the sockets to be readable and writeable by the group as well as the owner, supply the -G option. This causes the umask to be 007 whenever UNIX- domain sockets are created. -y n Limits the maximum number of concurrent recipok checks to n on a per-domain basis. The value of n can range from 0 (in which case no limit is applied) to maxWorkers, where maxWorkers is the argument to the -x option. If n is outside that range, it is ignored (and no limit is applied.) The recipok command ultimately invokes the filter_recipient function in your filter. If you are doing recipient verifica- tion against servers that may be slow or unreliable, you can use the -y option to limit the number of concurrent recipient veri- fications per domain. That way, if one domain's server becomes very slow, it won't consume all available workers for recipient verification. Instead, its RCPT commands will be tempfailed and there will be workers available to handle RCPT commands for other domains. SOCKET SPECIFICATION The -a, -N and -O options take a socket as an argument. This socket can be specified as: /path/to/socket A UNIX-domain socket inet:portnum A TCP socket bound to port portnum, but which accepts connec- tions only from the IPv4 loopback address (127.0.0.1). inet_any:portnum A TCP socket bound to port portnum which will accept connections from any address. Use inet_any with caution! inet6:portnum A TCP socket bound to port portnum listening on the IPv6 loop- back address. inet6_any:portnum A TCP socket bound to port portnum listening on the IPv6 wild- card address. QUEUEING REQUESTS Normally, if all workers are busy, any additional requests are failed immediately. However, the -q and -Q options allow you to queue re- quests for a short amount of time. This facility is intended to grace- fully handle a temporary overload; most of the time, your queue should be empty. Because mimedefang checks the number of free workers when a connection is opened and fails the connection if there are no free workers, the intent of the queue is to allow SMTP transactions that are already un- derway to continue if there is a slight overload. Any new connections will be failed if all workers are busy, but existing connections are allowed to continue. Queuing requests may improve throughput on ex- tremely busy servers. Note that if you supply the -q option to mimedefang, then even new con- nections are allowed to queue. This may improve throughput by keeping the worker utilization higher. The -R option to mimedefang can be used to reserve a specified number of workers for connections from the loopback address. Using the -R op- tion has the side-effect of permitting new connections from the loop- back address to queue. EMBEDDING PERL Normally, when mimedefang-multiplexor activates a worker, it forks and execs mimedefang.pl. However, if the multiplexor was compiled with em- bedded Perl support, and you supply the -E command-line option, the multiplexor works like this: 1 It creates an embedded Perl interpreter, and sources mimede- fang.pl with a special command-line argument telling it to read the filter, but not to enter the main loop. 2 Each time a worker is activated, the multiplexor calls fork() and runs the mimedefang.pl main loop. This invokes filter_ini- tialize and then runs the main loop. On some platforms (for example, Red Hat Linux 7.3 with Perl 5.6.1), it is not safe to destroy and recreate a Perl interpreter without causing a memory leak. On those platforms, if you attempt to reread the filter file (by sending the multiplexor a HUP signal or reread command), the filter will not be re-read, and a message will be logged to syslog. On those platforms, you must kill and restart MIMEDefang if you change the filter file. On most platforms, however, a filter reread is accomplished by destroy- ing and re-creating the embedded interpreter, re-sourcing mimedefang.pl and killing workers as soon as they are idle. STATISTICS With the -t option, mimedefang-multiplexor logs certain events to a file. This file can be post-processed to gather statistics about the multiplexor. You can use it to tune the number of workers you run, ad- just timeouts, and so on. Each line of the file looks like this: YYYY/MM/DD:HH:MM:SS timestamp event key=val key=val... Here, YYYY/MM/DD:HH:MM:SS is the local time of day. Timestamp is the number of seconds since January 1, 1970. Event is the name of an event. The valid events are: StartWorker A worker process has been started. KillWorker A worker process has been killed. ReapWorker A dead worker process has been reaped. It is possible to have a ReapWorker event without a previous KillWorker event if the worker process terminated abnormally. StartFilter A worker process has begun filtering an e-mail message. EndFilter A worker process has finished filtering an e-mail message. The possible keys in the key=value pairs are: worker=n The worker involved in the event. Every worker is identified by a small integer. nworkers=n The total number of running workers immediately after the event happened. nbusy=n The number of busy workers (workers which are processing an e- mail message) immediately after the event happened. reason="string" The reason for a StartWorker or KillWorker event. (Present only for these events.) numRequests=n The number of e-mails processed by the worker. Present only for an EndFilter event. If you send the mimedefang-multiplexor process a SIGHUP signal (kill -1 pid), it closes and reopens the statistics file. This is useful during log file rotation. If you send the mimedefang-multiplexor process a SIGINT signal (kill -INT pid), it terminates all active-but-idle workers. Also, any ac- tive-and-busy workers terminate as soon as they finish filtering the current message. This is useful to force a reread of the filter rules file without stopping and restarting Sendmail. If you send the mimedefang-multiplexor process a SIGTERM signal (kill pid), it terminates all workers and exits immediately. AUTHOR mimedefang-mulitplexor was written by Dianne Skoll <dfs@roaringpen- guin.com>. The mimedefang home page is http://www.mimedefang.org/. SEE ALSO mimedefang.pl(8), mimedefang-filter(5), mimedefang(8), mimedefang-pro- tocol(7) 4th Berkeley Distribution 8 February 2005 MIMEDEFANG-MULTIPLEXOR(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SOCKET SPECIFICATION | QUEUEING REQUESTS | EMBEDDING PERL | STATISTICS | AUTHOR | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mimedefang-multiplexor&sektion=8&manpath=FreeBSD+Ports+15.0.quarterly>