CREATE DATABASE(7) PostgreSQL 18.6 Documentation CREATE DATABASE(7) NAME CREATE_DATABASE - create a new database SYNOPSIS CREATE DATABASE name [ WITH ] [ OWNER [=] user_name ] [ TEMPLATE [=] template ] [ ENCODING [=] encoding ] [ STRATEGY [=] strategy ] [ LOCALE [=] locale ] [ LC_COLLATE [=] lc_collate ] [ LC_CTYPE [=] lc_ctype ] [ BUILTIN_LOCALE [=] builtin_locale ] [ ICU_LOCALE [=] icu_locale ] [ ICU_RULES [=] icu_rules ] [ LOCALE_PROVIDER [=] locale_provider ] [ COLLATION_VERSION = collation_version ] [ TABLESPACE [=] tablespace_name ] [ ALLOW_CONNECTIONS [=] allowconn ] [ CONNECTION LIMIT [=] connlimit ] [ IS_TEMPLATE [=] istemplate ] [ OID [=] oid ] DESCRIPTION CREATE DATABASE creates a new PostgreSQL database. To create a database, you must be a superuser or have the special CREATEDB privilege. See CREATE ROLE (CREATE_ROLE(7)). By default, the new database will be created by cloning the standard system database template1. A different template can be specified by writing TEM- PLATE name. In particular, by writing TEMPLATE template0, you can create a pristine database (one where no user-defined objects exist and where the system objects have not been altered) containing only the standard objects predefined by your version of PostgreSQL. This is useful if you wish to avoid copying any installation-local objects that might have been added to template1. PARAMETERS name The name of a database to create. user_name The role name of the user who will own the new database, or DEFAULT to use the default (namely, the user executing the command). To create a database owned by another role, you must be able to SET ROLE to that role. template The name of the template from which to create the new database, or DE- FAULT to use the default template (template1). encoding Character set encoding to use in the new database. Specify a string constant (e.g., 'SQL_ASCII'), or an integer encoding number, or DEFAULT to use the default encoding (namely, the encoding of the template data- base). The character sets supported by the PostgreSQL server are de- scribed in Section 23.3.1. See below for additional restrictions. strategy Strategy to be used in creating the new database. If the WAL_LOG strat- egy is used, the database will be copied block by block and each block will be separately written to the write-ahead log. This is the most ef- ficient strategy in cases where the template database is small, and therefore it is the default. The older FILE_COPY strategy is also available. This strategy writes a small record to the write-ahead log for each tablespace used by the target database. Each such record rep- resents copying an entire directory to a new location at the filesystem level. While this does reduce the write-ahead log volume substantially, especially if the template database is large, it also forces the system to perform a checkpoint both before and after the creation of the new database. In some situations, this may have a noticeable negative im- pact on overall system performance. The FILE_COPY strategy is affected by the file_copy_method setting. locale Sets the default collation order and character classification in the new database. Collation affects the sort order applied to strings, e.g., in queries with ORDER BY, as well as the order used in indexes on text columns. Character classification affects the categorization of characters, e.g., lower, upper, and digit. Also sets the associated as- pects of the operating system environment, LC_COLLATE and LC_CTYPE. The default is the same setting as the template database. See Sec- tion 23.2.2.3.1 and Section 23.2.2.3.2 for details. Can be overridden by setting lc_collate, lc_ctype, builtin_locale, or icu_locale individually. If locale_provider is builtin, then locale or builtin_locale must be specified and set to either C, C.UTF-8, or PG_UNICODE_FAST. Tip The other locale settings lc_messages, lc_monetary, lc_numeric, and lc_time are not fixed per database and are not set by this command. If you want to make them the default for a specific database, you can use ALTER DATABASE ... SET. lc_collate Sets LC_COLLATE in the database server's operating system environment. The default is the setting of locale if specified, otherwise the same setting as the template database. See below for additional restric- tions. If locale_provider is libc, also sets the default collation order to use in the new database, overriding the setting locale. lc_ctype Sets LC_CTYPE in the database server's operating system environment. The default is the setting of locale if specified, otherwise the same setting as the template database. See below for additional restric- tions. If locale_provider is libc, also sets the default character classifica- tion to use in the new database, overriding the setting locale. builtin_locale Specifies the builtin provider locale for the database default colla- tion order and character classification, overriding the setting locale. The locale provider must be builtin. The default is the setting of lo- cale if specified; otherwise the same setting as the template database. The locales available for the builtin provider are C, C.UTF-8 and PG_UNICODE_FAST. icu_locale Specifies the ICU locale (see Section 23.2.2.3.2) for the database de- fault collation order and character classification, overriding the set- ting locale. The locale provider must be ICU. The default is the set- ting of locale if specified; otherwise the same setting as the template database. icu_rules Specifies additional collation rules to customize the behavior of the default collation of this database. This is supported for ICU only. See Section 23.2.3.4 for details. locale_provider Specifies the provider to use for the default collation in this data- base. Possible values are builtin, icu (if the server was built with ICU support) or libc. By default, the provider is the same as that of the template. See Section 23.1.4 for details. collation_version Specifies the collation version string to store with the database. Nor- mally, this should be omitted, which will cause the version to be com- puted from the actual version of the database collation as provided by the operating system. This option is intended to be used by pg_upgrade for copying the version from an existing installation. See also ALTER DATABASE (ALTER_DATABASE(7)) for how to handle database collation version mismatches. tablespace_name The name of the tablespace that will be associated with the new data- base, or DEFAULT to use the template database's tablespace. This table- space will be the default tablespace used for objects created in this database. See CREATE TABLESPACE (CREATE_TABLESPACE(7)) for more infor- mation. allowconn If false then no one can connect to this database. The default is true, allowing connections (except as restricted by other mechanisms, such as GRANT/REVOKE CONNECT). connlimit How many concurrent connections can be made to this database. -1 (the default) means no limit. istemplate If true, then this database can be cloned by any user with CREATEDB privileges; if false (the default), then only superusers or the owner of the database can clone it. oid The object identifier to be used for the new database. If this parame- ter is not specified, PostgreSQL will choose a suitable OID automati- cally. This parameter is primarily intended for internal use by pg_up- grade, and only pg_upgrade can specify a value less than 16384. Optional parameters can be written in any order, not only the order illus- trated above. NOTES CREATE DATABASE cannot be executed inside a transaction block. Errors along the line of "could not initialize database directory" are most likely related to insufficient permissions on the data directory, a full disk, or other file system problems. Use DROP DATABASE to remove a database. The program createdb(1) is a wrapper program around this command, provided for convenience. Database-level configuration parameters (set via ALTER DATABASE) and data- base-level permissions (set via GRANT) are not copied from the template database. Although it is possible to copy a database other than template1 by specify- ing its name as the template, this is not (yet) intended as a general-pur- pose "COPY DATABASE" facility. The principal limitation is that no other sessions can be connected to the template database while it is being copied. CREATE DATABASE will fail if any other connection exists when it starts; otherwise, new connections to the template database are locked out until CREATE DATABASE completes. See Section 22.3 for more information. The character set encoding specified for the new database must be compati- ble with the chosen locale settings (LC_COLLATE and LC_CTYPE). If the lo- cale is C (or equivalently POSIX), then all encodings are allowed, but for other locale settings there is only one encoding that will work properly. (On Windows, however, UTF-8 encoding can be used with any locale.) CREATE DATABASE will allow superusers to specify SQL_ASCII encoding regardless of the locale settings, but this choice is deprecated and may result in misbe- havior of character-string functions if data that is not encoding-compati- ble with the locale is stored in the database. The encoding and locale settings must match those of the template database, except when template0 is used as template. This is because other databases might contain data that does not match the specified encoding, or might contain indexes whose sort ordering is affected by LC_COLLATE and LC_CTYPE. Copying such data would result in a database that is corrupt according to the new settings. template0, however, is known to not contain any data or indexes that would be affected. There is currently no option to use a database locale with nondeterministic comparisons (see CREATE COLLATION for an explanation). If this is needed, then per-column collations would need to be used. The CONNECTION LIMIT option is only enforced approximately; if two new ses- sions start at about the same time when just one connection "slot" remains for the database, it is possible that both will fail. Also, the limit is not enforced against superusers or background worker processes. EXAMPLES To create a new database: CREATE DATABASE lusiadas; To create a database sales owned by user salesapp with a default tablespace of salesspace: CREATE DATABASE sales OWNER salesapp TABLESPACE salesspace; To create a database music with a different locale: CREATE DATABASE music LOCALE 'sv_SE.utf8' TEMPLATE template0; In this example, the TEMPLATE template0 clause is required if the specified locale is different from the one in template1. (If it is not, then specify- ing the locale explicitly is redundant.) To create a database music2 with a different locale and a different charac- ter set encoding: CREATE DATABASE music2 LOCALE 'sv_SE.iso885915' ENCODING LATIN9 TEMPLATE template0; The specified locale and encoding settings must match, or an error will be reported. Note that locale names are specific to the operating system, so that the above commands might not work in the same way everywhere. COMPATIBILITY There is no CREATE DATABASE statement in the SQL standard. Databases are equivalent to catalogs, whose creation is implementation-defined. SEE ALSO ALTER DATABASE (ALTER_DATABASE(7)), DROP DATABASE (DROP_DATABASE(7)) PostgreSQL 18.6 2026 CREATE DATABASE(7)
NAME | SYNOPSIS | DESCRIPTION | PARAMETERS | NOTES | EXAMPLES | COMPATIBILITY | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=CREATE_DATABASE&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>