CREATE TRIGGER(7) PostgreSQL 18.6 Documentation CREATE TRIGGER(7) NAME CREATE_TRIGGER - define a new trigger SYNOPSIS CREATE [ OR REPLACE ] [ CONSTRAINT ] TRIGGER name { BEFORE | AFTER | INSTEAD OF } { event [ OR ... ] } ON table_name [ FROM referenced_table_name ] [ NOT DEFERRABLE | [ DEFERRABLE ] [ INITIALLY IMMEDIATE | INITIALLY DEFERRED ] ] [ REFERENCING { { OLD | NEW } TABLE [ AS ] transition_relation_name } [ ... ] ] [ FOR [ EACH ] { ROW | STATEMENT } ] [ WHEN ( condition ) ] EXECUTE { FUNCTION | PROCEDURE } function_name ( arguments ) where event can be one of: INSERT UPDATE [ OF column_name [, ... ] ] DELETE TRUNCATE DESCRIPTION CREATE TRIGGER creates a new trigger. CREATE OR REPLACE TRIGGER will ei- ther create a new trigger, or replace an existing trigger. The trigger will be associated with the specified table, view, or foreign table and will ex- ecute the specified function function_name when certain operations are per- formed on that table. To replace the current definition of an existing trigger, use CREATE OR RE- PLACE TRIGGER, specifying the existing trigger's name and parent table. All other properties are replaced. The trigger can be specified to fire before the operation is attempted on a row (before constraints are checked and the INSERT, UPDATE, or DELETE is attempted); or after the operation has completed (after constraints are checked and the INSERT, UPDATE, or DELETE has completed); or instead of the operation (in the case of inserts, updates or deletes on a view). If the trigger fires before or instead of the event, the trigger can skip the op- eration for the current row, or change the row being inserted (for INSERT and UPDATE operations only). If the trigger fires after the event, all changes, including the effects of other triggers, are "visible" to the trigger. A trigger that is marked FOR EACH ROW is called once for every row that the operation modifies. For example, a DELETE that affects 10 rows will cause any ON DELETE triggers on the target relation to be called 10 separate times, once for each deleted row. In contrast, a trigger that is marked FOR EACH STATEMENT only executes once for any given operation, regardless of how many rows it modifies (in particular, an operation that modifies zero rows will still result in the execution of any applicable FOR EACH STATE- MENT triggers). Triggers that are specified to fire INSTEAD OF the trigger event must be marked FOR EACH ROW, and can only be defined on views. BEFORE and AFTER triggers on a view must be marked as FOR EACH STATEMENT. In addition, triggers may be defined to fire for TRUNCATE, though only FOR EACH STATEMENT. The following table summarizes which types of triggers may be used on ta- bles, views, and foreign tables: +------------+-------------+------------------+------------------+ | When | Event | Row-level | Statement-level | +------------+-------------+------------------+------------------+ | | INSERT/UP- | Tables and for- | Tables, views, | | | DATE/DELETE | eign tables | and foreign ta- | | BEFORE | | | bles | | +-------------+------------------+------------------+ | | TRUNCATE | -- | Tables and for- | | | | | eign tables | +------------+-------------+------------------+------------------+ | | INSERT/UP- | Tables and for- | Tables, views, | | | DATE/DELETE | eign tables | and foreign ta- | | AFTER | | | bles | | +-------------+------------------+------------------+ | | TRUNCATE | -- | Tables and for- | | | | | eign tables | +------------+-------------+------------------+------------------+ | | INSERT/UP- | Views | -- | | INSTEAD OF | DATE/DELETE | | | | +-------------+------------------+------------------+ | | TRUNCATE | -- | -- | +------------+-------------+------------------+------------------+ Also, a trigger definition can specify a Boolean WHEN condition, which will be tested to see whether the trigger should be fired. In row-level triggers the WHEN condition can examine the old and/or new values of columns of the row. Statement-level triggers can also have WHEN conditions, although the feature is not so useful for them since the condition cannot refer to any values in the table. If multiple triggers of the same kind are defined for the same event, they will be fired in alphabetical order by name. When the CONSTRAINT option is specified, this command creates a constraint trigger. This is the same as a regular trigger except that the timing of the trigger firing can be adjusted using SET CONSTRAINTS. Constraint trig- gers must be AFTER ROW triggers on plain tables (not foreign tables). They can be fired either at the end of the statement causing the triggering event, or at the end of the containing transaction; in the latter case they are said to be deferred. A pending deferred-trigger firing can also be forced to happen immediately by using SET CONSTRAINTS. Constraint triggers are expected to raise an exception when the constraints they implement are violated. The REFERENCING option enables collection of transition relations, which are row sets that include all of the rows inserted, deleted, or modified by the current SQL statement. This feature lets the trigger see a global view of what the statement did, not just one row at a time. This option is only allowed for an AFTER trigger on a plain table (not a foreign table). The trigger should not be a constraint trigger. Also, if the trigger is an UP- DATE trigger, it must not specify a column_name list when using this op- tion. OLD TABLE may only be specified once, and only for a trigger that can fire on UPDATE or DELETE; it creates a transition relation containing the before-images of all rows updated or deleted by the statement. Simi- larly, NEW TABLE may only be specified once, and only for a trigger that can fire on UPDATE or INSERT; it creates a transition relation containing the after-images of all rows updated or inserted by the statement. SELECT does not modify any rows so you cannot create SELECT triggers. Rules and views may provide workable solutions to problems that seem to need SE- LECT triggers. Refer to Chapter 37 for more information about triggers. PARAMETERS name The name to give the new trigger. This must be distinct from the name of any other trigger for the same table. The name cannot be schema-qualified -- the trigger inherits the schema of its table. For a constraint trigger, this is also the name to use when modifying the trigger's behavior using SET CONSTRAINTS. BEFORE AFTER INSTEAD OF Determines whether the function is called before, after, or instead of the event. A constraint trigger can only be specified as AFTER. event One of INSERT, UPDATE, DELETE, or TRUNCATE; this specifies the event that will fire the trigger. Multiple events can be specified using OR, except when transition relations are requested. For UPDATE events, it is possible to specify a list of columns using this syntax: UPDATE OF column_name1 [, column_name2 ... ] The trigger will only fire if at least one of the listed columns is mentioned as a target of the UPDATE command or if one of the listed columns is a generated column that depends on a column that is the tar- get of the UPDATE. INSTEAD OF UPDATE events do not allow a list of columns. A column list cannot be specified when requesting transition relations, either. table_name The name (optionally schema-qualified) of the table, view, or foreign table the trigger is for. referenced_table_name The (possibly schema-qualified) name of another table referenced by the constraint. This option is used for foreign-key constraints and is not recommended for general use. This can only be specified for constraint triggers. DEFERRABLE NOT DEFERRABLE INITIALLY IMMEDIATE INITIALLY DEFERRED The default timing of the trigger. See the CREATE TABLE (CREATE_TA- BLE(7)) documentation for details of these constraint options. This can only be specified for constraint triggers. REFERENCING This keyword immediately precedes the declaration of one or two rela- tion names that provide access to the transition relations of the trig- gering statement. OLD TABLE NEW TABLE This clause indicates whether the following relation name is for the before-image transition relation or the after-image transition rela- tion. transition_relation_name The (unqualified) name to be used within the trigger for this transi- tion relation. FOR EACH ROW FOR EACH STATEMENT This specifies whether the trigger function should be fired once for every row affected by the trigger event, or just once per SQL state- ment. If neither is specified, FOR EACH STATEMENT is the default. Con- straint triggers can only be specified FOR EACH ROW. condition A Boolean expression that determines whether the trigger function will actually be executed. If WHEN is specified, the function will only be called if the condition returns true. In FOR EACH ROW triggers, the WHEN condition can refer to columns of the old and/or new row values by writing OLD.column_name or NEW.column_name respectively. Of course, IN- SERT triggers cannot refer to OLD and DELETE triggers cannot refer to NEW. INSTEAD OF triggers do not support WHEN conditions. Currently, WHEN expressions cannot contain subqueries. Note that for constraint triggers, evaluation of the WHEN condition is not deferred, but occurs immediately after the row update operation is performed. If the condition does not evaluate to true then the trigger is not queued for deferred execution. function_name A user-supplied function that is declared as taking no arguments and returning type trigger, which is executed when the trigger fires. In the syntax of CREATE TRIGGER, the keywords FUNCTION and PROCEDURE are equivalent, but the referenced function must in any case be a func- tion, not a procedure. The use of the keyword PROCEDURE here is histor- ical and deprecated. arguments An optional comma-separated list of arguments to be provided to the function when the trigger is executed. The arguments are literal string constants. Simple names and numeric constants can be written here, too, but they will all be converted to strings. Please check the description of the implementation language of the trigger function to find out how these arguments can be accessed within the function; it might be dif- ferent from normal function arguments. NOTES To create or replace a trigger on a table, the user must have the TRIGGER privilege on the table. The user must also have EXECUTE privilege on the trigger function. Use DROP TRIGGER to remove a trigger. Creating a row-level trigger on a partitioned table will cause an identical "clone" trigger to be created on each of its existing partitions; and any partitions created or attached later will have an identical trigger, too. If there is a conflictingly-named trigger on a child partition already, an error occurs unless CREATE OR REPLACE TRIGGER is used, in which case that trigger is replaced with a clone trigger. When a partition is detached from its parent, its clone triggers are removed. A column-specific trigger (one defined using the UPDATE OF column_name syn- tax) will fire when any of its columns are listed as targets in the UPDATE command's SET list. It is possible for a column's value to change even when the trigger is not fired, because changes made to the row's contents by BE- FORE UPDATE triggers are not considered. Conversely, a command such as UP- DATE ... SET x = x ... will fire a trigger on column x, even though the column's value did not change. In a BEFORE trigger, the WHEN condition is evaluated just before the func- tion is or would be executed, so using WHEN is not materially different from testing the same condition at the beginning of the trigger function. Note in particular that the NEW row seen by the condition is the current value, as possibly modified by earlier triggers. Also, a BEFORE trigger's WHEN condition is not allowed to examine the system columns of the NEW row (such as ctid), because those won't have been set yet. In an AFTER trigger, the WHEN condition is evaluated just after the row up- date occurs, and it determines whether an event is queued to fire the trig- ger at the end of statement. So when an AFTER trigger's WHEN condition does not return true, it is not necessary to queue an event nor to re-fetch the row at end of statement. This can result in significant speedups in state- ments that modify many rows, if the trigger only needs to be fired for a few of the rows. In some cases it is possible for a single SQL command to fire more than one kind of trigger. For instance an INSERT with an ON CONFLICT DO UPDATE clause may cause both insert and update operations, so it will fire both kinds of triggers as needed. The transition relations supplied to triggers are specific to their event type; thus an INSERT trigger will see only the inserted rows, while an UPDATE trigger will see only the updated rows. Row updates or deletions caused by foreign-key enforcement actions, such as ON UPDATE CASCADE or ON DELETE SET NULL, are treated as part of the SQL command that caused them (note that such actions are never deferred). Rele- vant triggers on the affected table will be fired, so that this provides another way in which an SQL command might fire triggers not directly match- ing its type. In simple cases, triggers that request transition relations will see all changes caused in their table by a single original SQL command as a single transition relation. However, there are cases in which the presence of an AFTER ROW trigger that requests transition relations will cause the foreign-key enforcement actions triggered by a single SQL command to be split into multiple steps, each with its own transition relation(s). In such cases, any statement-level triggers that are present will be fired once per creation of a transition relation set, ensuring that the triggers see each affected row in a transition relation once and only once. Statement-level triggers on a view are fired only if the action on the view is handled by a row-level INSTEAD OF trigger. If the action is handled by an INSTEAD rule, then whatever statements are emitted by the rule are exe- cuted in place of the original statement naming the view, so that the trig- gers that will be fired are those on tables named in the replacement state- ments. Similarly, if the view is automatically updatable, then the action is handled by automatically rewriting the statement into an action on the view's base table, so that the base table's statement-level triggers are the ones that are fired. Modifying a partitioned table or a table with inheritance children fires statement-level triggers attached to the explicitly named table, but not statement-level triggers for its partitions or child tables. In contrast, row-level triggers are fired on the rows in affected partitions or child tables, even if they are not explicitly named in the query. If a state- ment-level trigger has been defined with transition relations named by a REFERENCING clause, then before and after images of rows are visible from all affected partitions or child tables. In the case of inheritance chil- dren, the row images include only columns that are present in the table that the trigger is attached to. Currently, row-level triggers with transition relations cannot be defined on partitions or inheritance child tables. Also, triggers on partitioned tables may not be INSTEAD OF. Currently, the OR REPLACE option is not supported for constraint triggers. Replacing an existing trigger within a transaction that has already per- formed updating actions on the trigger's table is not recommended. Trigger firing decisions, or portions of firing decisions, that have already been made will not be reconsidered, so the effects could be surprising. There are a few built-in trigger functions that can be used to solve common problems without having to write your own trigger code; see Section 9.29. EXAMPLES Execute the function check_account_update whenever a row of the table ac- counts is about to be updated: CREATE TRIGGER check_update BEFORE UPDATE ON accounts FOR EACH ROW EXECUTE FUNCTION check_account_update(); Modify that trigger definition to only execute the function if column bal- ance is specified as a target in the UPDATE command: CREATE OR REPLACE TRIGGER check_update BEFORE UPDATE OF balance ON accounts FOR EACH ROW EXECUTE FUNCTION check_account_update(); This form only executes the function if column balance has in fact changed value: CREATE TRIGGER check_update BEFORE UPDATE ON accounts FOR EACH ROW WHEN (OLD.balance IS DISTINCT FROM NEW.balance) EXECUTE FUNCTION check_account_update(); Call a function to log updates of accounts, but only if something changed: CREATE TRIGGER log_update AFTER UPDATE ON accounts FOR EACH ROW WHEN (OLD.* IS DISTINCT FROM NEW.*) EXECUTE FUNCTION log_account_update(); Execute the function view_insert_row for each row to insert rows into the tables underlying a view: CREATE TRIGGER view_insert INSTEAD OF INSERT ON my_view FOR EACH ROW EXECUTE FUNCTION view_insert_row(); Execute the function check_transfer_balances_to_zero for each statement to confirm that the transfer rows offset to a net of zero: CREATE TRIGGER transfer_insert AFTER INSERT ON transfer REFERENCING NEW TABLE AS inserted FOR EACH STATEMENT EXECUTE FUNCTION check_transfer_balances_to_zero(); Execute the function check_matching_pairs for each row to confirm that changes are made to matching pairs at the same time (by the same state- ment): CREATE TRIGGER paired_items_update AFTER UPDATE ON paired_items REFERENCING NEW TABLE AS newtab OLD TABLE AS oldtab FOR EACH ROW EXECUTE FUNCTION check_matching_pairs(); Section 37.4 contains a complete example of a trigger function written in C. COMPATIBILITY The CREATE TRIGGER statement in PostgreSQL implements a subset of the SQL standard. The following functionalities are currently missing: * While transition table names for AFTER triggers are specified using the REFERENCING clause in the standard way, the row variables used in FOR EACH ROW triggers may not be specified in a REFERENCING clause. They are available in a manner that is dependent on the language in which the trigger function is written, but is fixed for any one language. Some languages effectively behave as though there is a REFERENCING clause containing OLD ROW AS OLD NEW ROW AS NEW. * The standard allows transition tables to be used with column-specific UPDATE triggers, but then the set of rows that should be visible in the transition tables depends on the trigger's column list. This is not currently implemented by PostgreSQL. * PostgreSQL only allows the execution of a user-defined function for the triggered action. The standard allows the execution of a number of other SQL commands, such as CREATE TABLE, as the triggered action. This limitation is not hard to work around by creating a user-defined func- tion that executes the desired commands. SQL specifies that multiple triggers should be fired in time-of-creation order. PostgreSQL uses name order, which was judged to be more convenient. SQL specifies that BEFORE DELETE triggers on cascaded deletes fire after the cascaded DELETE completes. The PostgreSQL behavior is for BEFORE DELETE to always fire before the delete action, even a cascading one. This is con- sidered more consistent. There is also nonstandard behavior if BEFORE trig- gers modify rows or prevent updates during an update that is caused by a referential action. This can lead to constraint violations or stored data that does not honor the referential constraint. The ability to specify multiple actions for a single trigger using OR is a PostgreSQL extension of the SQL standard. The ability to fire triggers for TRUNCATE is a PostgreSQL extension of the SQL standard, as is the ability to define statement-level triggers on views. CREATE CONSTRAINT TRIGGER is a PostgreSQL extension of the SQL standard. So is the OR REPLACE option. SEE ALSO ALTER TRIGGER (ALTER_TRIGGER(7)), DROP TRIGGER (DROP_TRIGGER(7)), CREATE FUNCTION (CREATE_FUNCTION(7)), SET CONSTRAINTS (SET_CONSTRAINTS(7)) PostgreSQL 18.6 2026 CREATE TRIGGER(7)
NAME | SYNOPSIS | DESCRIPTION | PARAMETERS | NOTES | EXAMPLES | COMPATIBILITY | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=CREATE_TRIGGER&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>