FreeBSD Manual Pages
RNAEVAL(1) User Commands RNAEVAL(1) NAME RNAeval - manual page for RNAeval 2.7.2 SYNOPSIS RNAeval [OPTIONS] [<input0>] [<input1>]... DESCRIPTION RNAeval 2.7.2 Determine the free energy of a (consensus) secondary structure for (an alignment of) RNA sequence(s) Evaluates the free energy of a particular (consensus) secondary structure for an (an alignment of) RNA molecule(s). The energy unit is kcal/mol and contains a covariance pseudo-energy term for multiple sequence alignments (--msa option) and corresponding consensus structures. The program will continue to read new sequences and structures until a line consisting of the single character '@' or an end of file condition is encountered. If the input sequence or structure contains the separator character '&' the program calculates the energy of the co-folding of two RNA strands, where the '&' marks the boundary between the two strands. -h, --help Print help and exit --detailed-help Print help, including all details and hidden options, and exit --full-help Print help, including hidden options, and exit -V, --version Print version and exit -v, --verbose Be verbose and print out energy contribution of each loop in the structure. (default=off) Lower the log level setting such that even INFO messages are passed through. I/O Options: Command line options for input and output (pre-)processing -i, --infile=filename Read a file instead of reading from stdin. The default behavior of RNAeval is to read input from stdin or the file(s) that follow(s) the RNAeval command. Using this parameter the user can specify input file names where data is read from. Note, that any additional files supplied to RNAeval are still processed as well. -a, --msa Input is multiple sequence alignment in Stockholm 1.0 format. (default=off) Using this flag indicates that the input is a multiple sequence alignment (MSA) instead of (a) single sequence(s). Note, that only STOCKHOLM format allows one to specify a consensus structure. There- fore, this is the only supported MSA format for now! --mis Output "most informative sequence" instead of simple consensus: For each column of the alignment output the set of nucleotides with fre- quency greater than average in IUPAC notation. (default=off) -j, --jobs[=number] Split batch input into jobs and start processing in parallel using multiple threads. A value of 0 indicates to use as many parallel threads as computation cores are available. (default=`0') Default processing of input data is performed in a serial fashion, i.e. one sequence at a time. Using this switch, a user can instead start the computation for many sequences in the input in parallel. RNAeval will create as many parallel computation slots as specified and assigns input sequences of the input file(s) to the available slots. Note, that this increases memory consumption since input alignments have to be kept in memory until an empty compute slot is available and each running job requires its own dynamic programming matrices. --unordered Do not try to keep output in order with input while parallel pro- cessing is in place. (default=off) When parallel input processing (--jobs flag) is enabled, the order in which input is processed depends on the host machines job sched- uler. Therefore, any output to stdout or files generated by this program will most likely not follow the order of the corresponding input data set. The default of RNAeval is to use a specialized data structure to still keep the results output in order with the input data. However, this comes with a trade-off in terms of memory con- sumption, since all output must be kept in memory for as long as no chunks of consecutive, ordered output are available. By setting this flag, RNAeval will not buffer individual results but print them as soon as they have been computated. --noconv Do not automatically substitute nucleotide "T" with "U". (default=off) --auto-id Automatically generate an ID for each sequence. (default=off) The default mode of RNAeval is to automatically determine an ID from the input sequence data if the input file format allows to do that. Sequence IDs are usually given in the FASTA header of input se- quences. If this flag is active, RNAeval ignores any IDs retrieved from the input and automatically generates an ID for each sequence. This ID consists of a prefix and an increasing number. This flag can also be used to add a FASTA header to the output even if the input has none. --id-prefix=STRING Prefix for automatically generated IDs (as used in output file names). (default=`sequence') If this parameter is set, each sequence will be prefixed with the provided string. Note: Setting this parameter implies --auto-id. --id-delim=CHAR Change the delimiter between prefix and increasing number for auto- matically generated IDs (as used in output file names). (default=`_') This parameter can be used to change the default delimiter '_' be- tween the prefix string and the increasing number for automatically generated ID. --id-digits=INT Specify the number of digits of the counter in automatically gener- ated alignment IDs. (default=`4') When alignments IDs are automatically generated, they receive an in- creasing number, starting with 1. This number will always be left-padded by leading zeros, such that the number takes up a cer- tain width. Using this parameter, the width can be specified to the users need. We allow numbers in the range [1:18]. This option im- plies --auto-id. --id-start=LONG Specify the first number in automatically generated IDs. (default=`1') When sequence IDs are automatically generated, they receive an in- creasing number, usually starting with 1. Using this parameter, the first number can be specified to the users requirements. Note: nega- tive numbers are not allowed. Note: Setting this parameter implies to ignore any IDs retrieved from the input data, i.e. it activates the --auto-id flag. --log-level=level Set log level threshold. (default=`2') By default, any log messages are filtered such that only warnings (level 2) or errors (level 3) are printed. This setting allows for specifying the log level threshold, where higher values result in fewer information. Log-level 5 turns off all messages, even errors and other critical information. --log-file[=filename] Print log messages to a file instead of stderr. (default=`RNAe- val.log') --log-time Include time stamp in log messages. (default=off) --log-call Include file and line of log calling function. (default=off) Algorithms: Select additional algorithmic details which should be included in the calculations. -c, --circ Assume a circular (instead of linear) RNA molecule. (default=off) -g, --gquad Incoorporate G-Quadruplex formation into the structure prediction algorithm. (default=off) Structure Constraints: Command line options to interact with the structure constraints fea- ture of this program --shape=filename Use SHAPE reactivity data to guide structure predictions. --shapeMethod=method Select SHAPE reactivity data incorporation strategy. (default=`D') The following methods can be used to convert SHAPE reactivities into pseudo energy contributions. 'D': Convert by using the linear equation according to Deigan et al 2009. Derived pseudo energy terms will be applied for every nucleotide in- volved in a stacked pair. This method is recognized by a capital 'D' in the provided parameter, i.e.: --shapeMethod="D" is the default setting. The slope 'm' and the intercept 'b' can be set to a non-de- fault value if necessary, otherwise m=1.8 and b=-0.6. To alter these parameters, e.g. m=1.9 and b=-0.7, use a parameter string like this: --shapeMethod="Dm1.9b-0.7". You may also provide only one of the two parameters like: --shapeMethod="Dm1.9" or --shapeMethod="Db-0.7". 'Z': Convert SHAPE reactivities to pseudo energies according to Zarringhalam et al 2012. SHAPE reactivities will be converted to pairing proba- bilities by using linear mapping. Aberration from the observed pair- ing probabilities will be penalized during the folding recursion. The magnitude of the penalties can affected by adjusting the factor beta (e.g. --shapeMethod="Zb0.8"). 'W': Apply a given vector of perturbation energies to unpaired nu- cleotides according to Washietl et al 2012.Perturbation vectors can be calcu- lated by using RNApvmin. --shapeConversion=method Select method for SHAPE reactivity conversion. (default=`O') This parameter is useful when dealing with the SHAPE incorporation according to Zarringhalam et al. The following methods can be used to convert SHAPE reactivities into the probability for a certain nu- cleotide to be unpaired. 'M': Use linear mapping according to Zarringhalam et al. 'C': Use a cutoff-approach to divide into paired and unpaired nucleotides (e.g. "C0.25") 'S': Skip the normalizing step since the input data already represents probabilities for being unpaired rather than raw reactiv- ity values 'L': Use a linear model to convert the reactivity into a probability for being unpaired (e.g. "Ls0.68i0.2" to use a slope of 0.68 and an intercept of 0.2) 'O': Use a linear model to convert the log of the reactivity into a probability for being unpaired (e.g. "Os1.6i-2.29" to use a slope of 1.6 and an intercept of -2.29) Energy Parameters: Energy parameter sets can be adapted or loaded from user-provided input files -T, --temp=DOUBLE Rescale energy parameters to a temperature of temp C. Default is 37C. (default=`37.0') -P, --paramFile=paramfile Read energy parameters from paramfile, instead of using the default parameter set. Different sets of energy parameters for RNA and DNA should accompany your distribution. See the RNAlib documentation for details on the file format. The placeholder file name 'DNA' can be used to load DNA parameters without the need to actually specify any input file. -4, --noTetra Do not include special tabulated stabilizing energies for tri-, tetra- and hexaloop hairpins. (default=off) Mostly for testing. --salt=DOUBLE Set salt concentration in molar (M). Default is 1.021M. Model Details: Tweak the energy model and pairing rules additionally using the fol- lowing parameters -d, --dangles=INT How to treat "dangling end" energies for bases adjacent to helices in free ends and multi-loops. (default=`2') With -d1 only unpaired bases can participate in at most one dangling end. With -d2 this check is ignored, dangling energies will be added for the bases adjacent to a helix on both sides in any case; this is the default for mfe and partition function folding. The op- tion -d0 ignores dangling ends altogether (mostly for debugging). With -d3 mfe folding will allow coaxial stacking of adjacent helices in multi-loops. At the moment the implementation will not allow coaxial stacking of the two enclosed pairs in a loop of degree 3. --nsp=STRING Allow other pairs in addition to the usual AU,GC,and GU pairs. Its argument is a comma separated list of additionally allowed pairs. If the first character is a "-" then AB will imply that AB and BA are allowed pairs, e.g. --nsp="-GA" will allow GA and AG pairs. Nonstandard pairs are given 0 stacking energy. --energyModel=INT Set energy model. Rarely used option to fold sequences from the artificial ABCD... al- phabet, where A pairs B, C-D etc. Use the energy parameters for GC (--energyModel 1) or AU (--energyModel 2) pairs. --logML Recalculate energies of structures using a logarithmic energy func- tion for multi-loops before output. (default=off) This option does not effect structure generation, only the energies that are printed out. Since logML lowers energies somewhat, some structures may be missing. --cfactor=DOUBLE Set the weight of the covariance term in the energy function (default=`1.0') --nfactor=DOUBLE Set the penalty for non-compatible sequences in the covariance term of the energy function (default=`1.0') -R, --ribosum_file=ribosumfile use specified Ribosum Matrix instead of normal energy model. Matrixes to use should be 6x6 matrices, the order of the terms is 'AU', 'CG', 'GC', 'GU', 'UA', 'UG'. -r, --ribosum_scoring use ribosum scoring matrix. (default=off) The matrix is chosen according to the minimal and maximal pairwise identities of the sequences in the file. --old use old energy evaluation, treating gaps as characters. (default=off) --helical-rise=FLOAT Set the helical rise of the helix in units of Angstrom. (default=`2.8') Use with caution! This value will be re-set automatically to 3.4 in case DNA parameters are loaded via -P DNA and no further value is provided. --backbone-length=FLOAT Set the average backbone length for looped regions in units of Angstrom. (default=`6.0') Use with caution! This value will be re-set automatically to 6.76 in case DNA parameters are loaded via -P DNA and no further value is provided. REFERENCES If you use this program in your work you might want to cite: R. Lorenz, S.H. Bernhart, C. Hoener zu Siederdissen, H. Tafer, C. Flamm, P.F. Stadler and I.L. Hofacker (2011), "ViennaRNA Package 2.0", Algorithms for Molecular Biology: 6:26 I.L. Hofacker, W. Fontana, P.F. Stadler, S. Bonhoeffer, M. Tacker, P. Schuster (1994), "Fast Folding and Comparison of RNA Secondary Structures", Monatshefte f. Chemie: 125, pp 167-188 R. Lorenz, I.L. Hofacker, P.F. Stadler (2016), "RNA folding with hard and soft constraints", Algorithms for Molecular Biology 11:1 pp 1-13 The energy parameters are taken from: D.H. Mathews, M.D. Disney, D. Matthew, J.L. Childs, S.J. Schroeder, J. Su- san, M. Zuker, D.H. Turner (2004), "Incorporating chemical modification constraints into a dynamic programming algorithm for prediction of RNA sec- ondary structure", Proc. Natl. Acad. Sci. USA: 101, pp 7287-7292 D.H Turner, D.H. Mathews (2009), "NNDB: The nearest neighbor parameter database for predicting stability of nucleic acid secondary structure", Nu- cleic Acids Research: 38, pp 280-282 AUTHOR Ivo L Hofacker, Peter F Stadler, Ronny Lorenz REPORTING BUGS If in doubt our program is right, nature is at fault. Comments should be sent to rna@tbi.univie.ac.at. RNAeval 2.7.2 December 2025 RNAEVAL(1)
NAME | SYNOPSIS | DESCRIPTION | REFERENCES | AUTHOR | REPORTING BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=RNAeval&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>