FreeBSD Manual Pages
RNAPALN(1) User Commands RNAPALN(1) NAME RNApaln - manual page for RNApaln 2.7.2 SYNOPSIS RNApaln [OPTION]... DESCRIPTION RNApaln 2.7.2 RNA alignment based on sequence base pairing propensities Uses string-alignment techniques to perform fast pairwise structural align- ments of RNAs. Similar to RNApdist secondary structure is incorporated in an approximate manner by computing base pair probabilities, which are then reduced to a vector holding the probability that a base is paired upstream, downstream, or remains unpaired. Such pair propsensity vectors can then be compared using standard alignment algorithms. In contrast to RNApdist, RNA- paln performs similarity (instead of distance) alignments, considers both sequence and structure information, and uses affine (rather than linear) gap costs. RNApaln can perform semi-local alignments by using free end gaps, a true local alignment mode is planned. The same approach has since been used in the StraL program from Gerhard Steeger's group. Since StraL has optimized parameters and a multiple align- ment mode, it be be currently the better option. -h, --help Print help and exit --detailed-help Print help, including all details and hidden options, and exit --full-help Print help, including hidden options, and exit -V, --version Print version and exit -v, --verbose Be verbose. (default=off) Lower the log level setting such that even INFO messages are passed through. I/O Options: Command line options for input and output (pre-)processing -B, --printAlignment[=filename] Print an "alignment" with gaps of the profiles The aligned structures are written to filename, if specified Other- wise output is written to stdout, unless the -Xm option is set in which case "backtrack.file" is used. (default=`stdout') The following symbols are used: ( ) essentially upstream (downstream) paired bases { } weakly upstream (downstream) paired bases | strongly paired bases without preference , weakly paired bases without preference . essentially unpaired bases. --noconv Do not automatically substitute nucleotide "T" with "U". (default=off) --log-level=level Set log level threshold. (default=`2') By default, any log messages are filtered such that only warnings (level 2) or errors (level 3) are printed. This setting allows for specifying the log level threshold, where higher values result in fewer information. Log-level 5 turns off all messages, even errors and other critical information. --log-file[=filename] Print log messages to a file instead of stderr. (default=`RNA- paln.log') --log-time Include time stamp in log messages. (default=off) --log-call Include file and line of log calling function. (default=off) Algorithms: Select additional algorithms which should be included in the calcu- lations. -X, --mode=pmfc Set the alignment mode to be used. The alignment mode is passed as a single character value. The fol- lowing options are available: 'p' - Compare the structures pairwise, that is first with 2nd, third with 4th etc. This is the default. 'm' - Calculate the distance matrix between all structures. The output is formatted as a lower triangle matrix. 'f' - Compare each structure to the first one. 'c' - Compare continuously, that is i-th with (i+1)th structure. --gapo=open Set the gap open penalty --gape=ext Set the gap extension penalty --seqw=w Set the weight of sequence (compared to structure) in the scoring function. --endgaps Use free end-gaps (default=off) Energy Parameters: Energy parameter sets can be adapted or loaded from user-provided input files -T, --temp=DOUBLE Rescale energy parameters to a temperature of temp C. Default is 37C. (default=`37.0') -P, --paramFile=paramfile Read energy parameters from paramfile, instead of using the default parameter set. Different sets of energy parameters for RNA and DNA should accompany your distribution. See the RNAlib documentation for details on the file format. When passing the placeholder file name "DNA", DNA para- meters are loaded without the need to actually specify any input file. -4, --noTetra Do not include special tabulated stabilizing energies for tri-, tetra- and hexaloop hairpins. (default=off) Mostly for testing. --salt=DOUBLE Set salt concentration in molar (M). Default is 1.021M. Model Details: Tweak the energy model and pairing rules additionally using the fol- lowing parameters -d, --dangles=INT How to treat "dangling end" energies for bases adjacent to helices in free ends and multi-loops. (default=`2') With -d1 only unpaired bases can participate in at most one dangling end. With -d2 this check is ignored, dangling energies will be added for the bases adjacent to a helix on both sides in any case; this is the default for mfe and partition function folding (-p). The option -d0 ignores dangling ends altogether (mostly for debug- ging). With -d3 mfe folding will allow coaxial stacking of adjacent helices in multi-loops. At the moment the implementation will not allow coaxial stacking of the two enclosed pairs in a loop of degree 3 and works only for mfe folding. Note that with -d1 and -d3 only the MFE computations will be using this setting while partition function uses -d2 setting, i.e. dan- gling ends will be treated differently. --noLP Produce structures without lonely pairs (helices of length 1). (default=off) For partition function folding this only disallows pairs that can only occur isolated. Other pairs may still occasionally occur as he- lices of length 1. --noGU Do not allow GU pairs. (default=off) --noClosingGU Do not allow GU pairs at the end of helices. (default=off) --nsp=STRING Allow other pairs in addition to the usual AU,GC,and GU pairs. Its argument is a comma separated list of additionally allowed pairs. If the first character is a "-" then AB will imply that AB and BA are allowed pairs. e.g. RNAfold -nsp -GA will allow GA and AG pairs. Nonstandard pairs are given 0 stacking energy. --energyModel=INT Set energy model. Rarely used option to fold sequences from the artificial ABCD... al- phabet, where A pairs B, C-D etc. Use the energy parameters for GC (--energyModel 1) or AU (--energyModel 2) pairs. --helical-rise=FLOAT Set the helical rise of the helix in units of Angstrom. (default=`2.8') Use with caution! This value will be re-set automatically to 3.4 in case DNA parameters are loaded via -P DNA and no further value is provided. --backbone-length=FLOAT Set the average backbone length for looped regions in units of Angstrom. (default=`6.0') Use with caution! This value will be re-set automatically to 6.76 in case DNA parameters are loaded via -P DNA and no further value is provided. REFERENCES If you use this program in your work you might want to cite: R. Lorenz, S.H. Bernhart, C. Hoener zu Siederdissen, H. Tafer, C. Flamm, P.F. Stadler and I.L. Hofacker (2011), "ViennaRNA Package 2.0", Algorithms for Molecular Biology: 6:26 I.L. Hofacker, W. Fontana, P.F. Stadler, S. Bonhoeffer, M. Tacker, P. Schuster (1994), "Fast Folding and Comparison of RNA Secondary Structures", Monatshefte f. Chemie: 125, pp 167-188 R. Lorenz, I.L. Hofacker, P.F. Stadler (2016), "RNA folding with hard and soft constraints", Algorithms for Molecular Biology 11:1 pp 1-13 Bonhoeffer S, McCaskill J S, Stadler P F, Schuster P (1993), "RNA multi- structure landscapes", Euro Biophys J: 22, pp 13-24 The energy parameters are taken from: D.H. Mathews, M.D. Disney, D. Matthew, J.L. Childs, S.J. Schroeder, J. Su- san, M. Zuker, D.H. Turner (2004), "Incorporating chemical modification constraints into a dynamic programming algorithm for prediction of RNA sec- ondary structure", Proc. Natl. Acad. Sci. USA: 101, pp 7287-7292 D.H Turner, D.H. Mathews (2009), "NNDB: The nearest neighbor parameter database for predicting stability of nucleic acid secondary structure", Nu- cleic Acids Research: 38, pp 280-282 AUTHOR Peter F Stadler, Ivo L Hofacker, Sebastian Bonhoeffer REPORTING BUGS If in doubt our program is right, nature is at fault. Comments should be sent to rna@tbi.univie.ac.at. RNApaln 2.7.2 December 2025 RNAPALN(1)
NAME | SYNOPSIS | DESCRIPTION | REFERENCES | AUTHOR | REPORTING BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=RNApaln&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>