rte_pmd_mlx5.h(3) DPDK rte_pmd_mlx5.h(3) NAME rte_pmd_mlx5.h SYNOPSIS #include <stdint.h> #include <rte_byteorder.h> #include <rte_compat.h> #include <rte_per_lcore.h> Data Structures struct rte_pmd_mlx5_geneve_tlv struct rte_pmd_mlx5_driver_event_cb_queue_info struct rte_pmd_mlx5_driver_event_cb_info Macros #define RTE_PMD_MLX5_DOMAIN_BIT_NIC_RX (1 << 0) #define RTE_PMD_MLX5_DOMAIN_BIT_NIC_TX (1 << 1) #define RTE_PMD_MLX5_DOMAIN_BIT_FDB (1 << 2) #define RTE_PMD_MLX5_EXTERNAL_RX_QUEUE_ID_MIN (UINT16_MAX - 1000 + 1) #define MLX5_EXTERNAL_TX_QUEUE_ID_MIN (UINT16_MAX - 1000 + 1) #define RTE_PMD_MLX5_LINEAR_HASH_TAG_INDEX 255 #define RTE_PMD_MLX5_HOST_SHAPER_FLAG_AVAIL_THRESH_TRIGGERED 0 #define RTE_PMD_MLX5_FLOW_ENGINE_FLAG_STANDBY_DUP_INGRESS RTE_BIT32(0) Typedefs typedef void(* rte_pmd_mlx5_driver_event_callback_t) (uint16_t port_id, const struct rte_pmd_mlx5_driver_event_cb_info *info, const void *opaque) Enumerations enum rte_pmd_mlx5_driver_event_cb_type { RTE_PMD_MLX5_DRI- VER_EVENT_CB_TYPE_RXQ_CREATE, RTE_PMD_MLX5_DRIVER_EVENT_CB_TYPE_RXQ_DE- STROY, RTE_PMD_MLX5_DRIVER_EVENT_CB_TYPE_TXQ_CREATE, RTE_PMD_MLX5_DRI- VER_EVENT_CB_TYPE_TXQ_DESTROY } Functions __rte_experimental int rte_pmd_mlx5_get_dyn_flag_names (char *names[], un- signed int n) __rte_experimental int rte_pmd_mlx5_sync_flow (uint16_t port_id, uint32_t domains) __rte_experimental int rte_pmd_mlx5_external_rx_queue_id_map (uint16_t port_id, uint16_t dpdk_idx, uint32_t hw_idx) __rte_experimental int rte_pmd_mlx5_external_rx_queue_id_unmap (uint16_t port_id, uint16_t dpdk_idx) __rte_experimental int rte_pmd_mlx5_external_tx_queue_id_map (uint16_t port_id, uint16_t dpdk_idx, uint32_t hw_idx) __rte_experimental int rte_pmd_mlx5_external_tx_queue_id_unmap (uint16_t port_id, uint16_t dpdk_idx) __rte_experimental int rte_pmd_mlx5_host_shaper_config (int port_id, uint8_t rate, uint32_t flags) __rte_experimental int rte_pmd_mlx5_external_sq_enable (uint16_t port_id, uint32_t sq_num) __rte_experimental int rte_pmd_mlx5_flow_engine_set_mode (enum rte_pmd_mlx5_flow_engine_mode mode, uint32_t flags) __rte_experimental void * rte_pmd_mlx5_create_geneve_tlv_parser (uint16_t port_id, const struct rte_pmd_mlx5_geneve_tlv tlv_list[], uint8_t nb_options) __rte_experimental int rte_pmd_mlx5_destroy_geneve_tlv_parser (void *han- dle) __rte_experimental int rte_pmd_mlx5_rxq_dump_contexts (uint16_t port_id, uint16_t queue_id, const char *filename) __rte_experimental int rte_pmd_mlx5_txq_dump_contexts (uint16_t port_id, uint16_t queue_id, const char *filename) __rte_experimental int rte_pmd_mlx5_external_sq_disable (uint16_t port_id, uint32_t sq_num) __rte_experimental int rte_pmd_mlx5_driver_event_cb_register (rte_pmd_mlx5_driver_event_callback_t cb, void *opaque) __rte_experimental int rte_pmd_mlx5_driver_event_cb_unregister (rte_pmd_mlx5_driver_event_callback_t cb) __rte_experimental void rte_pmd_mlx5_disable_steering (void) __rte_experimental int rte_pmd_mlx5_enable_steering (void) Detailed Description MLX5 public header. This interface provides the ability to support private PMD dynamic flags. Definition in file rte_pmd_mlx5.h. Macro Definition Documentation #define RTE_PMD_MLX5_DOMAIN_BIT_NIC_RX (1 << 0) NIC RX domain bit mask. Definition at line 45 of file rte_pmd_mlx5.h. #define RTE_PMD_MLX5_DOMAIN_BIT_NIC_TX (1 << 1) NIC TX domain bit mask. Definition at line 46 of file rte_pmd_mlx5.h. #define RTE_PMD_MLX5_DOMAIN_BIT_FDB (1 << 2) FDB (TX + RX) domain bit mask. Definition at line 47 of file rte_pmd_mlx5.h. #define RTE_PMD_MLX5_EXTERNAL_RX_QUEUE_ID_MIN (UINT16_MAX - 1000 + 1) External Rx queue rte_flow index minimal value. Definition at line 73 of file rte_pmd_mlx5.h. #define MLX5_EXTERNAL_TX_QUEUE_ID_MIN (UINT16_MAX - 1000 + 1) External Tx queue rte_flow index minimal value. Definition at line 78 of file rte_pmd_mlx5.h. #define RTE_PMD_MLX5_LINEAR_HASH_TAG_INDEX 255 Tag level to set the linear hash index. Definition at line 83 of file rte_pmd_mlx5.h. #define RTE_PMD_MLX5_HOST_SHAPER_FLAG_AVAIL_THRESH_TRIGGERED 0 The rate of the host port shaper will be updated directly at the next available descriptor threshold event to the rate that comes with this flag set; set rate 0 to disable this rate update. Unset this flag to update the rate of the host port shaper directly in the API call; use rate 0 to dis- able the current shaper. Definition at line 178 of file rte_pmd_mlx5.h. #define RTE_PMD_MLX5_FLOW_ENGINE_FLAG_STANDBY_DUP_INGRESS RTE_BIT32(0) When set on the flow engine of a standby process, ingress flow rules will be effective in active and standby processes, so the ingress traffic may be duplicated. Definition at line 228 of file rte_pmd_mlx5.h. Typedef Documentation typedef void(* rte_pmd_mlx5_driver_event_callback_t) (uint16_t port_id, const struct rte_pmd_mlx5_driver_event_cb_info *info, const void *opaque) Prototype of the callback called on mlx5 driver events. Definition at line 482 of file rte_pmd_mlx5.h. Enumeration Type Documentation enum rte_pmd_mlx5_driver_event_cb_type Type of mlx5 driver event for which custom callback is called. Enumerator RTE_PMD_MLX5_DRIVER_EVENT_CB_TYPE_RXQ_CREATE Called after HW Rx queue is created. RTE_PMD_MLX5_DRIVER_EVENT_CB_TYPE_RXQ_DESTROY Called before HW Rx queue will be destroyed. RTE_PMD_MLX5_DRIVER_EVENT_CB_TYPE_TXQ_CREATE Called after HW Tx queue is created. RTE_PMD_MLX5_DRIVER_EVENT_CB_TYPE_TXQ_DESTROY Called before HW Tx queue will be destroyed. Definition at line 423 of file rte_pmd_mlx5.h. Function Documentation __rte_experimental int rte_pmd_mlx5_get_dyn_flag_names (char * names[], un- signed int n) Returns the dynamic flags name, that are supported. Parameters names Array that is used to return the supported dynamic flags names. n The number of elements in the names array. Returns The number of dynamic flags that were copied if not negative. Other- wise: * ENOMEM - not enough entries in the array * EINVAL - invalid array entry __rte_experimental int rte_pmd_mlx5_sync_flow (uint16_t port_id, uint32_t do- mains) Synchronize the flows to make them take effort on hardware. It only sup- ports DR flows now. For DV and Verbs flows, there is no need to call this function, and a success will return directly in case of Verbs. Parameters port_id The port identifier of the Ethernet device. domains Refer to '/usr/include/infiniband/mlx5dv.h'. Bitmask of domains in which the synchronization will be done. RTE_PMD_MLX5_DOMAIN_BIT_* macros are used to specify the domains. An ADD or OR operation could be used to synchronize flows in more than one domain per call. Returns * (0) if successful. * Negative value if an error. __rte_experimental int rte_pmd_mlx5_external_rx_queue_id_map (uint16_t port_id, uint16_t dpdk_idx, uint32_t hw_idx) Update mapping between rte_flow queue index (16 bits) and HW queue index (32 bits) for RxQs which is created outside the PMD. Parameters port_id The port identifier of the Ethernet device. dpdk_idx Queue index in rte_flow. hw_idx Queue index in hardware. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EEXIST - a mapping with the same rte_flow index already exists. * EINVAL - invalid rte_flow index, out of range. * ENODEV - there is no Ethernet device for this port id. * ENOTSUP - the port doesn't support external RxQ. __rte_experimental int rte_pmd_mlx5_external_rx_queue_id_unmap (uint16_t port_id, uint16_t dpdk_idx) Remove mapping between rte_flow queue index (16 bits) and HW queue index (32 bits) for RxQs which is created outside the PMD. Parameters port_id The port identifier of the Ethernet device. dpdk_idx Queue index in rte_flow. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EINVAL - invalid index, out of range, still referenced or doesn't ex- ist. * ENODEV - there is no Ethernet device for this port id. * ENOTSUP - the port doesn't support external RxQ. __rte_experimental int rte_pmd_mlx5_external_tx_queue_id_map (uint16_t port_id, uint16_t dpdk_idx, uint32_t hw_idx) Update mapping between rte_flow Tx queue index (16 bits) and HW queue index (32 bits) for TxQs which is created outside the PMD. Parameters port_id The port identifier of the Ethernet device. dpdk_idx Queue index in rte_flow. hw_idx Queue index in hardware. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EEXIST - a mapping with the same rte_flow index already exists. * EINVAL - invalid rte_flow index, out of range. * ENODEV - there is no Ethernet device for this port id. * ENOTSUP - the port doesn't support external TxQ. __rte_experimental int rte_pmd_mlx5_external_tx_queue_id_unmap (uint16_t port_id, uint16_t dpdk_idx) Remove mapping between rte_flow Tx queue index (16 bits) and HW queue index (32 bits) for TxQs which is created outside the PMD. Parameters port_id The port identifier of the Ethernet device. dpdk_idx Queue index in rte_flow. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EINVAL - invalid index, out of range, still referenced or doesn't ex- ist. * ENODEV - there is no Ethernet device for this port id. * ENOTSUP - the port doesn't support external TxQ. __rte_experimental int rte_pmd_mlx5_host_shaper_config (int port_id, uint8_t rate, uint32_t flags) Configure a HW shaper to limit Tx rate for a host port. The configuration will affect all the ethdev ports belonging to the same rte_device. Parameters port_id The port identifier of the Ethernet device. rate Unit is 100Mbps, setting the rate to 0 disables the shaper. flags Host shaper flags (see RTE_PMD_MLX5_HOST_SHAPER_FLAG_*). Returns 0 : operation success. Otherwise: * ENOENT - no ibdev interface. * EBUSY - the register access unit is busy. * EIO - the register access command meets IO error. __rte_experimental int rte_pmd_mlx5_external_sq_enable (uint16_t port_id, uint32_t sq_num) Enable traffic for external SQ. Parameters port_id The port identifier of the Ethernet device. sq_num SQ HW number. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EINVAL - invalid sq_number or port type. * ENODEV - there is no Ethernet device for this port id. __rte_experimental int rte_pmd_mlx5_flow_engine_set_mode (enum rte_pmd_mlx5_flow_engine_mode mode, uint32_t flags) Warning EXPERIMENTAL: this API may change without prior notice Set the flow engine mode of the process to active or standby, affecting network traffic handling. If one device does not support this operation or fails, the whole operation is failed and rolled back. It is forbidden to have multiple flow engines with the same mode unless only one of them is configured to handle the traffic. The application's flow engine is active by default. The configuration from the active flow engine is effective immediately while the configuration from the standby flow engine is queued by hardware. When configuring the device from a standby flow engine, it has no effect except for below situa- tions: * traffic not handled by the active flow engine configuration * no active flow engine When flow engine of a process is changed from a standby to an active mode, all preceding configurations that are queued by hardware should become ef- fective immediately. Before mode transition, all the traffic handling con- figurations set by the active flow engine should be flushed first. In summary, the operations are expected to happen in this order in 'old' and 'new' applications: device: already configured by the old application new: start as active new: probe the same device new: set as standby new: configure the device device: has configurations from old and new applica- tions old: clear its device configuration device: has only 1 configuration from new application new: set as active device: downtime for connecting all to the new application old: shutdown Parameters mode The desired mode (see rte_pmd_mlx5_flow_engine_mode). flags Mode specific flags (see RTE_PMD_MLX5_FLOW_ENGINE_FLAG_*). Returns Positive value on success, -rte_errno value on error: * (> 0) Number of switched devices. * (-EINVAL) if error happen and rollback internally. * (-EPERM) if operation failed and can't recover. __rte_experimental void * rte_pmd_mlx5_create_geneve_tlv_parser (uint16_t port_id, const struct rte_pmd_mlx5_geneve_tlv tlv_list[], uint8_t nb_op- tions) Creates GENEVE TLV parser for the selected port. This function must be called before first use of GENEVE option. This API is port oriented, but the configuration is done once for all ports under the same physical device. Each port should call this API before using GENEVE OPT item, but it must use the same options in the same order inside the list. Each physical device has 7 DWs for GENEVE TLV options. Each nonzero element in 'match_data_mask' array consumes one DW, and choosing matchable mode for class consumes additional one. Calling this API for second port under same physical device doesn't consume more DW, it uses same configuration. Parameters port_id The port identifier of the Ethernet device. tlv_list A list of GENEVE TLV options to create parser for them. nb_options The number of options in TLV list. Returns A pointer to TLV handle on success, NULL otherwise and rte_errno is set. Possible values for rte_errno: * ENOMEM - not enough memory to create GENEVE TLV parser. * EEXIST - this port already has GENEVE TLV parser or another port un- der same physical device has already prepared a different parser. * EINVAL - invalid GENEVE TLV requested. * ENODEV - there is no Ethernet device for this port id. * ENOTSUP - the port doesn't support GENEVE TLV parsing. __rte_experimental int rte_pmd_mlx5_destroy_geneve_tlv_parser (void * handle) Destroy GENEVE TLV parser for the selected port. This function must be called after last use of GENEVE option and before port closing. Parameters handle Handle for the GENEVE TLV parser object to be destroyed. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EINVAL - invalid handle. * ENOENT - there is no valid GENEVE TLV parser in this handle. * EBUSY - one of options is in used by template table. __rte_experimental int rte_pmd_mlx5_rxq_dump_contexts (uint16_t port_id, uint16_t queue_id, const char * filename) Dump Rx Queue Context for a given port/queue Parameters port_id Port ID queue_id Queue ID filename Name of file to dump the Rx Queue Context Returns 0 for success, non-zero value depending on failure type __rte_experimental int rte_pmd_mlx5_txq_dump_contexts (uint16_t port_id, uint16_t queue_id, const char * filename) Dump Tx Queue Context for a given port/queue Parameters port_id Port ID queue_id Queue ID filename Name of file to dump the Tx Queue Context Returns 0 for success, non-zero value depending on failure type __rte_experimental int rte_pmd_mlx5_external_sq_disable (uint16_t port_id, uint32_t sq_num) Disable traffic for external SQ. Should be invoked by application before destroying the external SQ. Parameters port_id The port identifier of the Ethernet device. sq_num SQ HW number. Returns 0 on success, a negative errno value otherwise and rte_errno is set. Possible values for rte_errno: * EINVAL - invalid sq_number or port type. * ENODEV - there is no Ethernet device for this port id. __rte_experimental int rte_pmd_mlx5_driver_event_cb_register (rte_pmd_mlx5_driver_event_callback_t cb, void * opaque) Register mlx5 driver event callback. mlx5 PMD configures HW through interfaces exposed by rdma-core and mlx5 kernel driver. Any HW object created this way may be used by other li- braries or applications. This function allows application to register a custom callback which will be called whenever mlx5 PMD performs some opera- tion (driver event) on a managed HW objects. rte_pmd_mlx5_dri- ver_event_cb_type defines exposed driver events. This function can be called multiple times with different callbacks. mlx5 PMD will register all of them and all of them will be called for triggered driver events. This function can be called: * before or after rte_eal_init (potentially in a constructor function as well), * before or after any mlx5 port is probed. If this function is called when mlx5 ports (at least one) exist, then pro- vided callback will be immediately called for all applicable driver events, for all existing mlx5 ports. This function is lock-free and it is assumed that it won't be called con- currently with other functions from ethdev API used to configure any of the mlx5 ports. It is the responsibility of the application to enforce this. Registered callbacks might be called during control path configuration triggered by DPDK API. It is the user's responsibility to prevent calling more configurations by the DPDK API from the callback itself. mlx5 PMD registers a destructor (through RTE_FINI) which will unregister all known callbacks. Parameters cb Pointer to callback. opaque Opaque pointer which will be passed as an argument to cb on each event. Returns * 0 if callback was successfully registered. * (-EINVAL) if cb is NULL. * (-EEXIST) if cb was already registered. * (-ENOMEM) if failed to allocate memory for callback entry. __rte_experimental int rte_pmd_mlx5_driver_event_cb_unregister (rte_pmd_mlx5_driver_event_callback_t cb) Unregister driver event callback. Unregisters a mlx5 driver event callback which was previously registered through rte_pmd_mlx5_driver_event_cb_unregister. This function is lock-free and it is assumed that it won't be called con- currently with other functions from ethdev API used to configure any of the mlx5 ports. It is the responsibility of the application to enforce this. Parameters cb Pointer to callback. Returns * 0 if callback was successfully unregistered or if no such callback was registered. * (-EINVAL) if cb is NULL. __rte_experimental void rte_pmd_mlx5_disable_steering (void) Disable flow steering for all mlx5 ports. In mlx5 PMD, HW flow rules are generally used in 2 ways: * * In mlx5 PMD language, configuring flow rules is known as configuring flow steering. If an application wants to use any other library compatible with NVIDIA hardware to configure flow steering or delegate flow steering to another process, the application can call this function to disable flow steering globally for all mlx5 ports. Information required to configure flow steering in such a way that exter- nally created flow rules would forward/match traffic to DPDK-managed Rx/Tx queues can be extracted through rte_pmd_mlx5_driver_event_cb_register API. This function can be called: * before or after rte_eal_init. * before or after any mlx5 port is probed. If this function is called when mlx5 ports (at least one) exist, then steering will be disabled for all existing mlx5 port. This will invalidate ALL handles to objects return from flow API for these ports (for example handles to flow rules, indirect actions, template tables). This function is lock-free and it is assumed that it won't be called con- currently with other functions from ethdev API used to configure any of the mlx5 ports. It is the responsibility of the application to enforce this. __rte_experimental int rte_pmd_mlx5_enable_steering (void) Enable flow steering for mlx5 ports. This function reverses the effects of rte_pmd_mlx5_disable_steering. It can be called if and only if there are no mlx5 ports known by DPDK, so in case if rte_pmd_mlx5_disable_steering was previously called the applica- tion has to remove mlx5 devices, call this function and re-probe the mlx5 devices. Returns * 0 - Flow steering was successfully enabled or it flow steering was never disabled. * (-EBUSY) - There are mlx5 ports probed and re-enabling steering can- not be done safely. Author Generated automatically by Doxygen for DPDK from the source code. Version 25.11.0 Thu Aug 27 2026 rte_pmd_mlx5.h(3)
NAME | SYNOPSIS | Detailed Description | Macro Definition Documentation | Typedef Documentation | Enumeration Type Documentation | Function Documentation | Author
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=RTE_PMD_MLX5_DOMAIN_BIT_FDB&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>