FreeBSD Manual Pages
TPMLIB_SetProfile(3) TPMLIB_SetProfile(3) NAME TPMLIB_SetProfile - Set a profile for a TPM 2 LIBRARY TPM library (libtpms, -ltpms) SYNOPSIS #include <libtpms/tpm_types.h> #include <libtpms/tpm_library.h> #include <libtpms/tpm_error.h> TPM_RESULT TPMLIB_SetProfile(const char *profile); DESCRIPTION TPMLIB_SetProfile() is used to apply one of libtpms's provided profiles to a TPM 2 when it is started the first time. TPMLIB_SetProfile() must be called after TPMLIB_ChooseTPMVersion() and before TPMLIB_MainInit(). A profile may only be applied to a TPM 2 and will always fail for a TPM 1.2. Once a profile has been set it will be used by the TPM 2 from then on and the profile will be carried along with the state of the TPM 2 if the state of the TPM 2 was written using the callback registered with TPMLIB_Regis- terCallbacks(). Later attempts to set a different profile for the same TPM 2 instance using this API call will have no effect. Libtpms v0.10 and later support several built-in profiles. The 'null' pro- file provides backwards compatibility for libtpms v0.9 and only enables those algorithm and commands that were available at that version of libtpms. The default profile enables all currently available commands and algorithms. Neither one of these profiles allows any modifications by the user. The 'custom' profile is the only one that a user may modify and where the user may disable any commands and/or algorithms that can be disabled. If a NULL pointer is given as a profile then the 'null' profile will be used and only commands and algorithms of libtpms v0.9 will be enabled. The state of such a TPM 2 instance will be readable by the current version of libtpms as well as later versions of libtpms and allow for downgrading libtpms to version 0.9 from a later version. Profiles with the prefix 'default' enable as many algorithms and commands as possible. The 'default-v1' profile, introduced with libtpms v0.10, al- lows to run with libtpms v0.10 and later but will not allow to downgrade to earlier versions of libtpms, such as v0.9. A profile is a JSON map in string format. It must contain the 'Name' field with the name of a known profile. It may contain a field 'Algorithms' that holds a comma-separated list of algorithms (verbs) to enable or the field 'Commands' that holds a comma-separated list of ranges of command codes to enable. The following are examples of TPM 2 profiles: {"Name":"default-v1"} { "Name":"custom", "Algorithms":"rsa,rsa-min-size=1024,tdes-min-size=128,hmac,aes,\ aes-min-size=128,mgf1,keyedhash,xor,sha256,sha384,\ sha512,null,rsassa,rsaes,rsapss,oaep,ecdsa,ecdh,ecdaa,\ sm2,ecschnorr,ecmqv,kdf1-sp800-56a,kdf2,kdf1-sp800-108,\ ecc,ecc-min-size=192,ecc-nist,ecc-nb,symcipher,camellia,\ camellia-min-size=128,cmac,ctr,ofb,cbc,cfb,ecb", "StateFormatLevel":2 } The first profile selects the current default profile along with all com- mands and algorithms that are available. The second profile selects the custom profile but restricts the set of algorithms that the TPM 2 provides to those ones that are listed. Since 'sha1' and 'tdes' are missing in the list, it disables those algorithms. Note that the custom profile is the only profile that allows customizations of enabled Algorithms, Commands, and Attributes (not shown here). Only a subset of the implemented algorithms can be disabled. To determine the list of algorithms that can be disabled, use the list of algorithms re- turn by TPMLIB_GetInfo(TPMLIB_INFO_RUNTIME_ALGORITHMS) in the 'CanBeDis- abled' field. Similarly, only a subset of the implemented commands can be disabled and TPMLIB_GetInfo(TPMLIB_INFO_RUNTIME_COMMANDS) can be used to determine the list of 'CanBeDisabled' commands. No attributes are enabled by default, so all of them can be disabled. To see which attributes are implemented and can be enabled, use TPMLIB_GetInfo(TPMLIB_INFO_RUNTIME_AT- TRIBUTES). Since it is possible to disable algorithms that are mandatory for the PC Client TPM 2, one can create a TPM 2 instance that will cause applications to fail. Therefore, it is necessary to carefully select which algorithms to disable following the requirements of applications that will be used. At the same time the choice of enabled commands is important so that algo- rithms that are enabled can actually be used with the set of enabled com- mands and applications do not fail unexpectedly because of disabled com- mands. Therefore, determining the list of algorithms and commands to enable and disable is left to the user. StateFormatLevel The StateFormatLevel field exists in each profile carried by the state of a TPM 2. The StateFormatLevel is an integer that is increased whenever new TPM 2 commands or algorithms are enabled for profiles. The effect of this parameter is that a profile with StateFormatLevel 'n' will not be accepted by a libtpms version that does not at least implement StateFormatLevel 'n'. This prevents applications that may have used any newly enabled algorithms or commands from failing because they try to use them again with a TPM 2 from a libtpms version that does not support them. When the above is applied to a virtual machine environment then this means that migrating the state of a TPM 2 is only possible to a libtpms version that implements at least the same StateFormatLevel. Therefore, care must be taken which profile is chosen so that the profile's StateFormatLevel does not become the obstacle for migrating the TPM state between different ver- sions of libtpms. This in turn means that in an environment where older libtpms versions exist, which may be a target for migration, then the old- est libtpms version's supported profile should be chosen. If libtpms v0.9 exists then this should be the 'null' profile, for libtpms v0.10 this can be the the 'default-v1' profile. The following lists the meaning of StateFormatLevels: 1: (since v0.10) This StateFormatLevel is reserved for the null profile. Only algorithms and commands supported by libtpms v0.9 are enabled. To remain compati- ble with libtpms v0.9 state format, the null profile will not be writ- ten as part of the state. 2: (since v0.10) This StateFormatLevel enabled the writing of the profile as part of the state. 3: (since v0.10) This StateFormatLevel enabled the TPM 2 commands ECC_Encrypt (0x199) and ECC_Decrypt (0x19a). 4: (since v0.10) This StateFormatLevel: * enabled Camellia-192 and AES-192. * enabled setting of TPM 2-internal session attribute flag isName- HashDefined that was added; it may slightly change behavior of ses- sions when for example used by default-v1 profile compared to the null profile (libtpms v0.9). 5: (since v0.10) This StateFormatLevel enabled the TPM 2 commands PolicyCapability (0x19b) and PolicyParameters (0x19c). 6: (since v0.10) This StateFormatLevel made some internal changes to the marshalling and unmarshalling code of an OBJECT. Only RSA key OBJECTS have the private exponent field marshalled and the hierarchy field is also always mar- shalled now. RSA key OBJECTs may be 4 bytes bigger while others are smaller now. 7: (since v0.10) This StateFormatLevel enabled the following profile attributes: * no-unpadded-encryption * no-sha1-signing * no-sha1-verification * no-sha1-hmac-creation * no-sha1-hmac-verification * no-sha1-hmac * fips-host * drbg-continous-test * pct * no-ecc-key-derivation A user may specify the StateFormatLevel when using the custom profile. In this case the given StateFormatLevel serves as the maximum StateFormatLevel that the given algorithms and commands may require (e.g., '2' would not al- low to enable the command ECC_Encrypt, which requires '3') or allows to en- able key sizes, such as AES-192, when for example StateFormatLevel '4' is given. If StateFormatLevel '3' is given then AES-192 will not be enabled. Attributes A profile may have the Attributes key which is similar to Algorithms or Commands. The following is a list of supported verbs: no-unpadded-encryption: (since v0.10) * Prevents unpadded (raw) RSA encryption and decryption no-sha1-signing: (since v0.10) * Prevents signature generation with a SHA1 with RSA and ECC algorithms no-sha1-verification: (since v0.10) * Prevents signature verification with a SHA1 digest with RSA and ECC algorithms no-sha1-hmac-creation: (since v0.10) * Prevents creation of an HMAC using SHA1 no-sha1-hmac-verification: (since v0.10) * Prevents verification of an HMAC using SHA1 no-sha1-hmac: (since v0.10) * Prevents creation and verification of an HMAC using SHA1 fips-host: (since v0.10) * Prevents unpadded (raw) RSA encryption and decryption * Prevents signature generation with a SHA1 with RSA and ECC algorithms * Prevents signature verification with a SHA1 digest with RSA and ECC algorithms By adding this verb to the Attributes a TPM 2 can be run on a FIPS-en- abled host where the OpenSSL crypto library may restrict crypto algo- rithms as shown above (reference is RHEL 9.4+, but varies by distro). Note that usage of this verb does not make a TPM 2 instance compliant with FIPS-140. Also see the section on 'FIPS mode on the host'. drbg-continous-test: (since v0.10) * Turns on continuous testing of the DRBG pct: (since v0.10) * Turns on pairwise consistency test (pct) for RSA keys and EC signing keys no-ecc-key-derivation: (since v0.10) * Prevent ECC key derivation FIPS mode on the host If FIPS mode is enabled on a host (reference is RHEL 9.4+) then the OpenSSL crypto library will not be able to use certain algorithms. In this case the following list of verbs should be omitted from a profile to avoid either selftest failures or having to disable FIPS mode in the OpenSSL instance. * camellia, camellia-min-size * tdes, tdes-min-size * rsaes * ecc-nist-p192 * ecc-bn, ecc-bn-p256, ecc-bn-p638 * ecc-sm2-p256 A profile should contain the following verbs for minimum key sizes: * rsa-min-size=2048 * ecc-min-size=224 ERRORS TPM_SUCCESS The function completed successfully. TPM_FAIL A failure occurred. This may be due to a badly formatted JSON profile, a missing field in the JSON profile, an unknown verb in the JSON pro- file, or an out of memory error. The log file may show the reason for the failure. A TPM 1.2 cannot have a profile applied and will always respond with this error code. For a complete list of TPM error codes please consult the include file libtpms/tpm_error.h EXAMPLE #include <stdio.h> #include <libtpms/tpm_types.h> #include <libtpms/tpm_library.h> #include <libtpms/tpm_error.h> int main(void) { TPM_RESULT res; unsigned char *respbuffer = NULL; uint32_t resp_size = 0; uint32_t respbufsize = 0; unsigned char *command; uint32_t command_size; [...] if (TPMLIB_ChooseTPMVersion(TPMLIB_TPM_VERSION_2) != TPM_SUCCESS) { fprintf(stderr, "Could not choose a TPM 2.\n"); return 1; } if (TPMLIB_SetProfile(NULL) != TPM_SUCCESS) { fprintf(stderr, "Could not set the profile.\n"); return 1; } if (TPMLIB_MainInit() != TPM_SUCCESS) { fprintf(stderr, "Could not start the TPM.\n"); return 1; } [...] /* build TPM command */ [...] res = TPMLIB_Process(&respbuffer, &resp_size, &respbufsize, command, command_size); [...] TPMLIB_Terminate(); return 0; } SEE ALSO TPMLIB_ChooseTPMVersion, TPMLIB_RegisterCallbacks(3), TPMLIB_GetInfo(3) libtpms 2026-01-02 TPMLIB_SetProfile(3)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | StateFormatLevel | Attributes | FIPS mode on the host | ERRORS | EXAMPLE | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=TPMLIB_SetProfile&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>