FreeBSD Manual Pages
Tcl_TraceVar(3) Tcl Library Procedures Tcl_TraceVar(3) ________________________________________________________________________________ NAME Tcl_TraceVar, Tcl_TraceVar2, Tcl_UntraceVar, Tcl_UntraceVar2, Tcl_VarTrace- Info, Tcl_VarTraceInfo2 - monitor accesses to a variable SYNOPSIS #include <tcl.h> int Tcl_TraceVar(interp, varName, flags, proc, clientData) int Tcl_TraceVar2(interp, name1, name2, flags, proc, clientData) Tcl_UntraceVar(interp, varName, flags, proc, clientData) Tcl_UntraceVar2(interp, name1, name2, flags, proc, clientData) ClientData Tcl_VarTraceInfo(interp, varName, flags, proc, prevClientData) ClientData Tcl_VarTraceInfo2(interp, name1, name2, flags, proc, prevClientData) ARGUMENTS Tcl_Interp *interp (in) Interpreter containing vari- able. const char *varName (in) Name of variable. May refer to a scalar variable, to an array variable with no index, or to an array variable with a parenthesized index. int flags (in) OR-ed combination of the val- ues TCL_TRACE_READS, TCL_TRACE_WRITES, TCL_TRACE_UNSETS, TCL_TRACE_ARRAY, TCL_GLOBAL_ONLY, TCL_NAME- SPACE_ONLY, TCL_TRACE_RE- SULT_DYNAMIC and TCL_TRACE_RESULT_OBJECT. Not all flags are used by all procedures. See below for more information. Tcl_VarTraceProc *proc (in) Procedure to invoke whenever one of the traced operations occurs. ClientData clientData (in) Arbitrary one-word value to pass to proc. const char *name1 (in) Name of scalar or array vari- able (without array index). const char *name2 (in) For a trace on an element of an array, gives the index of the element. For traces on scalar variables or on whole arrays, is NULL. ClientData prevClientData (in) If non-NULL, gives last value returned by Tcl_VarTraceInfo or Tcl_VarTraceInfo2, so this call will return information about next trace. If NULL, this call will return infor- mation about first trace. ________________________________________________________________________________ DESCRIPTION Tcl_TraceVar allows a C procedure to monitor and control access to a Tcl variable, so that the C procedure is invoked whenever the variable is read or written or unset. If the trace is created successfully then Tcl_Trace- Var returns TCL_OK. If an error occurred (e.g. varName specifies an ele- ment of an array, but the actual variable is not an array) then TCL_ERROR is returned and an error message is left in the interpreter's result. The flags argument to Tcl_TraceVar indicates when the trace procedure is to be invoked and provides information for setting up the trace. It consists of an OR-ed combination of any of the following values: TCL_GLOBAL_ONLY Normally, the variable will be looked up at the current level of procedure call; if this bit is set then the variable will be looked up at global level, ignoring any active procedures. TCL_NAMESPACE_ONLY Normally, the variable will be looked up at the current level of procedure call; if this bit is set then the variable will be looked up in the current namespace, ignoring any active procedures. TCL_TRACE_READS Invoke proc whenever an attempt is made to read the variable. TCL_TRACE_WRITES Invoke proc whenever an attempt is made to modify the variable. TCL_TRACE_UNSETS Invoke proc whenever the variable is unset. A variable may be unset either explicitly by an unset command, or implicitly when a proce- dure returns (its local variables are automatically unset) or when the interpreter is deleted (all variables are automatically unset). TCL_TRACE_ARRAY Invoke proc whenever the array command is invoked. This gives the trace procedure a chance to update the array before array names or array get is called. Note that this is called before an array set, but that will trigger write traces. TCL_TRACE_RESULT_DYNAMIC The result of invoking the proc is a dynamically allocated string that will be released by the Tcl library via a call to ckfree. Must not be specified at the same time as TCL_TRACE_RESULT_OBJECT. TCL_TRACE_RESULT_OBJECT The result of invoking the proc is a Tcl_Obj* (cast to a char*) with a reference count of at least one. The ownership of that reference will be transferred to the Tcl core for release (when the core has finished with it) via a call to Tcl_DecrRefCount. Must not be spec- ified at the same time as TCL_TRACE_RESULT_DYNAMIC. Whenever one of the specified operations occurs on the variable, proc will be invoked. It should have arguments and result that match the type Tcl_VarTraceProc: typedef char *Tcl_VarTraceProc( ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags); The clientData and interp parameters will have the same values as those passed to Tcl_TraceVar when the trace was created. ClientData typically points to an application-specific data structure that describes what to do when proc is invoked. Name1 and name2 give the name of the traced variable in the normal two-part form (see the description of Tcl_TraceVar2 below for details). Flags is an OR-ed combination of bits providing several pieces of information. One of the bits TCL_TRACE_READS, TCL_TRACE_WRITES, TCL_TRACE_ARRAY, or TCL_TRACE_UNSETS will be set in flags to indicate which operation is being performed on the variable. The bit TCL_GLOBAL_ONLY will be set whenever the variable being accessed is a global one not accessible from the current level of procedure call: the trace procedure will need to pass this flag back to variable-related procedures like Tcl_GetVar if it attempts to access the variable. The bit TCL_NAMESPACE_ONLY will be set whenever the variable being accessed is a namespace one not accessible from the current level of procedure call: the trace procedure will need to pass this flag back to variable-related procedures like Tcl_GetVar if it at- tempts to access the variable. The bit TCL_TRACE_DESTROYED will be set in flags if the trace is about to be destroyed; this information may be use- ful to proc so that it can clean up its own internal data structures (see the section TCL_TRACE_DESTROYED below for more details). Lastly, the bit TCL_INTERP_DESTROYED will be set if the entire interpreter is being de- stroyed. When this bit is set, proc must be especially careful in the things it does (see the section TCL_INTERP_DESTROYED below). The trace procedure's return value should normally be NULL; see ERROR RETURNS below for information on other possibilities. Tcl_UntraceVar may be used to remove a trace. If the variable specified by interp, varName, and flags has a trace set with flags, proc, and client- Data, then the corresponding trace is removed. If no such trace exists, then the call to Tcl_UntraceVar has no effect. The same bits are valid for flags as for calls to Tcl_TraceVar. Tcl_VarTraceInfo may be used to retrieve information about traces set on a given variable. The return value from Tcl_VarTraceInfo is the clientData associated with a particular trace. The trace must be on the variable specified by the interp, varName, and flags arguments (only the TCL_GLOBAL_ONLY and TCL_NAMESPACE_ONLY bits from flags is used; other bits are ignored) and its trace procedure must the same as the proc argument. If the prevClientData argument is NULL then the return value corresponds to the first (most recently created) matching trace, or NULL if there are no matching traces. If the prevClientData argument is not NULL, then it should be the return value from a previous call to Tcl_VarTraceInfo. In this case, the new return value will correspond to the next matching trace after the one whose clientData matches prevClientData, or NULL if no trace matches prevClientData or if there are no more matching traces after it. This mechanism makes it possible to step through all of the traces for a given variable that have the same proc. TWO-PART NAMES The procedures Tcl_TraceVar2, Tcl_UntraceVar2, and Tcl_VarTraceInfo2 are identical to Tcl_TraceVar, Tcl_UntraceVar, and Tcl_VarTraceInfo, respec- tively, except that the name of the variable consists of two parts. Name1 gives the name of a scalar variable or array, and name2 gives the name of an element within an array. When name2 is NULL, name1 may contain both an array and an element name: if the name contains an open parenthesis and ends with a close parenthesis, then the value between the parentheses is treated as an element name (which can have any string value) and the char- acters before the first open parenthesis are treated as the name of an ar- ray variable. If name2 is NULL and name1 does not refer to an array ele- ment it means that either the variable is a scalar or the trace is to be set on the entire array rather than an individual element (see WHOLE-ARRAY TRACES below for more information). ACCESSING VARIABLES DURING TRACES During read, write, and array traces, the trace procedure can read, write, or unset the traced variable using Tcl_GetVar2, Tcl_SetVar2, and other pro- cedures. While proc is executing, traces are temporarily disabled for the variable, so that calls to Tcl_GetVar2 and Tcl_SetVar2 will not cause proc or other trace procedures to be invoked again. Disabling only occurs for the variable whose trace procedure is active; accesses to other variables will still be traced. However, if a variable is unset during a read or write trace then unset traces will be invoked. During unset traces the variable has already been completely expunged. It is possible for the trace procedure to read or write the variable, but this will be a new version of the variable. Traces are not disabled during un- set traces as they are for read and write traces, but existing traces have been removed from the variable before any trace procedures are invoked. If new traces are set by unset trace procedures, these traces will be invoked on accesses to the variable by the trace procedures. CALLBACK TIMING When read tracing has been specified for a variable, the trace procedure will be invoked whenever the variable's value is read. This includes set Tcl commands, $-notation in Tcl commands, and invocations of the Tcl_GetVar and Tcl_GetVar2 procedures. Proc is invoked just before the variable's value is returned. It may modify the value of the variable to affect what is returned by the traced access. If it unsets the variable then the ac- cess will return an error just as if the variable never existed. When write tracing has been specified for a variable, the trace procedure will be invoked whenever the variable's value is modified. This includes set commands, commands that modify variables as side effects (such as catch and scan), and calls to the Tcl_SetVar and Tcl_SetVar2 procedures). Proc will be invoked after the variable's value has been modified, but before the new value of the variable has been returned. It may modify the value of the variable to override the change and to determine the value actually returned by the traced access. If it deletes the variable then the traced access will return an empty string. When array tracing has been specified, the trace procedure will be invoked at the beginning of the array command implementation, before any of the op- erations like get, set, or names have been invoked. The trace procedure can modify the array elements with Tcl_SetVar and Tcl_SetVar2. When unset tracing has been specified, the trace procedure will be invoked whenever the variable is destroyed. The traces will be called after the variable has been completely unset. WHOLE-ARRAY TRACES If a call to Tcl_TraceVar or Tcl_TraceVar2 specifies the name of an array variable without an index into the array, then the trace will be set on the array as a whole. This means that proc will be invoked whenever any ele- ment of the array is accessed in the ways specified by flags. When an ar- ray is unset, a whole-array trace will be invoked just once, with name1 equal to the name of the array and name2 NULL; it will not be invoked once for each element. MULTIPLE TRACES It is possible for multiple traces to exist on the same variable. When this happens, all of the trace procedures will be invoked on each access, in order from most-recently-created to least-recently-created. When there exist whole-array traces for an array as well as traces on individual ele- ments, the whole-array traces are invoked before the individual-element traces. If a read or write trace unsets the variable then all of the unset traces will be invoked but the remainder of the read and write traces will be skipped. ERROR RETURNS Under normal conditions trace procedures should return NULL, indicating successful completion. If proc returns a non-NULL value it signifies that an error occurred. The return value must be a pointer to a static charac- ter string containing an error message, unless (exactly one of) the TCL_TRACE_RESULT_DYNAMIC and TCL_TRACE_RESULT_OBJECT flags is set, which specify that the result is either a dynamic string (to be released with ck- free) or a Tcl_Obj* (cast to char* and to be released with Tcl_DecrRef- Count) containing the error message. If a trace procedure returns an er- ror, no further traces are invoked for the access and the traced access aborts with the given message. Trace procedures can use this facility to make variables read-only, for example (but note that the value of the vari- able will already have been modified before the trace procedure is called, so the trace procedure will have to restore the correct value). The return value from proc is only used during read and write tracing. During unset traces, the return value is ignored and all relevant trace procedures will always be invoked. RESTRICTIONS A trace procedure can be called at any time, even when there are partially formed results stored in the interpreter. If the trace procedure does any- thing that could damage this result (such as calling Tcl_Eval) then it must use the Tcl_SaveInterpState and related routines to save and restore the original state of the interpreter before it returns. UNDEFINED VARIABLES It is legal to set a trace on an undefined variable. The variable will still appear to be undefined until the first time its value is set. If an undefined variable is traced and then unset, the unset will fail with an error ("no such variable"), but the trace procedure will still be invoked. TCL_TRACE_DESTROYED FLAG In an unset callback to proc, the TCL_TRACE_DESTROYED bit is set in flags if the trace is being removed as part of the deletion. Traces on a vari- able are always removed whenever the variable is deleted; the only time TCL_TRACE_DESTROYED is not set is for a whole-array trace invoked when only a single element of an array is unset. TCL_INTERP_DESTROYED When an interpreter is destroyed, unset traces are called for all of its variables. The TCL_INTERP_DESTROYED bit will be set in the flags argument passed to the trace procedures. Trace procedures must be extremely careful in what they do if the TCL_INTERP_DESTROYED bit is set. It is not safe for the procedures to invoke any Tcl procedures on the interpreter, since its state is partially deleted. All that trace procedures should do under these circumstances is to clean up and free their own internal data struc- tures. BUGS Tcl does not do any error checking to prevent trace procedures from misus- ing the interpreter during traces with TCL_INTERP_DESTROYED set. Array traces are not yet integrated with the Tcl info exists command, nor is there Tcl-level access to array traces. SEE ALSO trace(n) KEYWORDS clientData, trace, variable Tcl 7.4 Tcl_TraceVar(3)
NAME | SYNOPSIS | ARGUMENTS | DESCRIPTION | TWO-PART NAMES | ACCESSING VARIABLES DURING TRACES | CALLBACK TIMING | WHOLE-ARRAY TRACES | MULTIPLE TRACES | ERROR RETURNS | RESTRICTIONS | UNDEFINED VARIABLES | TCL_TRACE_DESTROYED FLAG | TCL_INTERP_DESTROYED | BUGS | SEE ALSO | KEYWORDS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=Tcl_UntraceVar2.tcl86&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>