FreeBSD Manual Pages
BIB2RIS(1) RefDB Manual BIB2RIS(1) NAME bib2ris, bib2ris-utf8 - converts bibtex bibliographic data to the RIS for- mat SYNOPSIS bib2ris [-e log-destination] [-h] [-j] [-l log-level] [-L log-file] [-q] [-s separator] [-v] [-y confdir] file bib2ris-utf8 [-e log-destination] [-h] [-j] [-l log-level] [-L log-file] [-q] [-s separator] [-v] [-y confdir] file DESCRIPTION bib2ris converts BibTeX bibliography files into RIS files. Latex commands, including non-ASCII characters written as commands, are preserved in the output. Importing the output of the bib2ris utility directly into RefDB is useful only if you use the data exclusively for LaTeX. bib2ris-utf8 is a variant which converts foreign characters to UTF-8 and strips all other LaTeX commands by means of the refdb_latex2utf8txt (1) tool. The output of bib2ris-utf8 is the preferred format for import into RefDB as it is suitable for both LaTeX and SGML/XML bibliographies. Unfortunately the concepts underlying BibTeX and RIS bibliographic data are quite different so that BibTeX data do not readily lend themselves to a clean conversion to the RIS format. This is not meant as an excuse to pro- vide a bad filter but you should be aware that a few compile-time assump- tions have to be made in order to get reasonable results. In any case, as the data models differ considerably, a loss-free round-trip conversion be- tween the two data types is not possible: If you convert a BibTeX bibliog- raphy file to RIS and then back, the result will differ considerably from your input. The following considerations apply to the data import into RefDB and the data export from RefDB: 1. BibTeX input data that are not written in UTF-8, that use formatting commands like font name, weight, or posture specifications, or that use LaTeX commands to write foreign and special characters should always be converted with bib2ris-utf8. 2. BibTeX output data will have the LaTeX command characters properly es- caped. The data will use the default encoding of your reference database unless you specifically request a different encoding with the getref command or with the refdbib tool. Keep in mind that recent LaTeX instal- lations can work with UTF-8 data using the following incantation in the prolog, allowing the easiest support for all kinds of foreign charac- ters: \usepackage[utf8]{inputenc} OPTIONS -e log-destination log-destination can have the values 0, 1, or 2, or the equivalent strings stderr, syslog, or file, respectively. This value specifies where the log information goes to. 0 (zero) means the messages are sent to stderr. They are immediately available on the screen but they may in- terfere with command output. 1 will send the output to the syslog fa- cility. Keep in mind that syslog must be configured to accept log mes- sages from user programs, see the syslog(8) man page for further infor- mation. Unix-like systems usually save these messages in /var/log/user.log. 2 will send the messages to a custom log file which can be specified with the -L option. -h Displays help and usage screen, then exits. -j Force bib2ris to use JO RIS fields in all cases. If this option is not used, bib2ris tries to infer whether a journal name is an abbreviation or not. If the string contains at least one period, JO will be used, otherwise JF will be used. -l log-level Specify the priority up to which events are logged. This is either a number between 0 and 7 or one of the strings emerg, alert, crit, err, warning, notice, info, debug, respectively (see also Log level defini- tions). -1 disables logging completely. A low log level like 0 means that only the most critical messages are logged. A higher log level means that less critical events are logged as well. 7 will include de- bug messages. The latter can be verbose and abundant, so you want to avoid this log level unless you need to track down problems. -L log-file Specify the full path to a log file that will receive the log messages. Typically this would be /var/log/refdba. -q Start without reading the configuration files. The client will use the compile-time defaults for all values that you do not set with com- mand-line switches. -s separator Specify the delimiter which separates individual keywords in a non-stan- dard keyword field. Use the string spc for whitespace-separated lists (spaces and tabs). -v Prints version and copyright information, then exits. -y confdir Specify the directory where the global configuration files are Note: By default, all RefDB applications look for their configuration files in a directory that is specified during the configure step when building the package. That is, you don't need the -y option unless you use precom- piled binaries in unusual locations, e.g. by relocating a rpm package. file If used, this parameter denotes the names of one or more bibtex files. If no file is specified, bib2ris tries to read the data from stdin. Out- put is always sent to stdout. DIAGNOSTICS The exit code of bib2ris indicates what went wrong in general (the details can be found in the log output). The code is the sum of the following error values: 1 general error; includes out of memory situations and invalid com- mand-line options 2 incomplete entry (at least one essential field in an entry was missing) 4 unknown field name 8 unknown publication type 16 invalid BibTeX->RIS type mapping 32 parse error; includes file access errors CONFIGURATION bib2ris evaluates the file bib2risrc to initialize itself. Table-1.-bib2risrc-+----------------------+----------------------+ | Variable | Default | Comment | +------------------+----------------------+----------------------+ | logfile | /var/log/bib2ris.log | The full path of a | | | | custom log file. | | | | This is used only if | | | | logdest is set ap- | | | | propriately. | +------------------+----------------------+----------------------+ | mapconference | CHAP | map the BibTeX con- | | | | ference publication | | | | type to a RIS type | +------------------+----------------------+----------------------+ | mapinbook | CHAP | map the BibTeX in- | | | | book publication | | | | type to a RIS type | +------------------+----------------------+----------------------+ | mapincollection | CHAP | map the BibTeX in- | | | | collection publica- | | | | tion type to a RIS | | | | type | +------------------+----------------------+----------------------+ | mapinproceedings | CHAP | map the BibTeX in- | | | | proceedings publica- | | | | tion type to a RIS | | | | type | +------------------+----------------------+----------------------+ | mapmanual | BOOK | map the BibTeX man- | | | | ual publication type | | | | to a RIS type | +------------------+----------------------+----------------------+ | mapmastersthesis | THES | map the BibTeX mas- | | | | tersthesis publica- | | | | tion type to a RIS | | | | type | +------------------+----------------------+----------------------+ | mapmisc | GEN | map the BibTeX misc | | | | publication type to | | | | a RIS type | +------------------+----------------------+----------------------+ | mapphdthesis | THES | map the BibTeX | | | | phdthesis publica- | | | | tion type to a RIS | | | | type | +------------------+----------------------+----------------------+ | mapproceedings | CONF | map the BibTeX pro- | | | | ceedings publication | | | | type to a RIS type | +------------------+----------------------+----------------------+ | maptechreport | RPRT | map the BibTeX | | | | techreport publica- | | | | tion type to a RIS | | | | type | +------------------+----------------------+----------------------+ | logdest | 1 | The destination of | | | | the log information. | | | | 0 = print to stderr; | | | | 1 = use the syslog | | | | facility; 2 = use a | | | | custom logfile. The | | | | latter needs a | | | | proper setting of | | | | logfile. | +------------------+----------------------+----------------------+ | mapunpublished | UNPB | map the BibTeX un- | | | | published publica- | | | | tion type to a RIS | | | | type | +------------------+----------------------+----------------------+ | nsf_xyz | (none) | You can specify an | | | | unlimited number of | | | | these entries to map | | | | non-standard BibTeX | | | | fields to RIS tags. | | | | The BibTeX field | | | | name in this vari- | | | | able has to be in | | | | lowercase, regard- | | | | less of the case in | | | | your input data | | | | (bib2ris treats | | | | field names as | | | | case-insensitive). | | | | The two-letter RIS | | | | tag has to be in up- | | | | percase. E.g. to map | | | | your BibTeX "Ab- | | | | stract" field to the | | | | RIS "N2" tag, the | | | | entry would read: | | | | "nsf_abstract N2". | +------------------+----------------------+----------------------+ | loglevel | 6 | The log level up to | | | | which messages will | | | | be sent. A low set- | | | | ting (0) allows only | | | | the most important | | | | messages, a high | | | | setting (7) allows | | | | all messages includ- | | | | ing debug messages. | | | | -1 means nothing | | | | will be logged. | +------------------+----------------------+----------------------+ | abbrevfirst | t | If this option is | | | | set to "t", the | | | | first names of all | | | | authors and editors | | | | will be abbreviated | | | | to the initials. If | | | | set to "f", the | | | | first names will be | | | | used as they are | | | | found in the BibTeX | | | | bibliography file. | +------------------+----------------------+----------------------+ | listsep | ; | This is the delim- | | | | iter which separates | | | | individual keywords | | | | in a non-standard | | | | keyword field. Use | | | | the string "spc" for | | | | whitespace-separated | | | | lists (spaces and | | | | tabs). | +------------------+----------------------+----------------------+ | forcejabbrev | f | If this is set to | | | | "t", journal names | | | | will be wrapped in | | | | RIS "JO" entries. If | | | | it is set to "f", | | | | bib2ris will use | | | | "JO" entries only if | | | | the journal name | | | | contains at least | | | | one period, other- | | | | wise it will use | | | | "JF". | +------------------+----------------------+----------------------+ | maparticle | JOUR | map the BibTeX arti- | | | | cle publication type | | | | to a RIS type | +------------------+----------------------+----------------------+ | mapbook | BOOK | map the BibTeX book | | | | publication type to | | | | a RIS type | +------------------+----------------------+----------------------+ | mapbooklet | PAMP | map the BibTeX book- | | | | let publication type | | | | to a RIS type | +------------------+----------------------+----------------------+ DATA PROCESSING This section provides a few hints about the data conversion itself and the BibTeX format requirements. * The parsing of the input data is done by the btparse library. All limi- tations of that library apply to bib2ris as well. This applies very specifically to two hardcoded settings in btparse which, simply put, limit the size and complexity (in terms of macros) of an input file that btparse can handle. If you run into this kind of problem (I had to pull a 2 MB BibTeX bibliography from the net in order to verify this limit) you should increase the values of NUM_MACROS and STRING_SIZE in the source file macros.c and recompile the btparse library. * All entry names and field names in the BibTeX input file are treated as case-insensitive, i.e. "BoOk" is the same as "book" and "AUTHOR" is the same as "aUthoR". * The entries are checked for completeness. An error is generated if an entry lacks fields which are considered essential for the particular publication type. * Non-standard fields can be imported in addition to the predefined BibTeX fields. Create an entry for each non-standard BibTeX field name that your input data use in your bib2ris configuration file. The data are handled differently based on the type of RIS field they are imported to. If the data are imported to the RIS fields AD, N1, or N2, which basi- cally have an unlimited size, all occurrences of these fields will be concatenated into a single AD, N1, or N2 tag line, respectively. If the data are mapped to the RIS KW field, the string will be tokenized based on the list separator specified in the listsep configuration variable. Each token will be written as a separate KW tag line. A special case is the RIS pseudo-field "PY.day". Data imported to this tag are integrated as the day part in the publication date tag line "PY" (year and month, but not day, are standard BibTeX fields and are recognized by default). All other fields will be printed with their requested RIS tag. It is at the discretion of any RIS importing application to decide what to do with duplicate tag lines. Multiples are allowed for author tags (AU, A2, A3) and the keyword tag (KW). refdb will use the last occurrence of a tag line that does not allow multiple occurrences. * Abbreviated journal names are detected only if they use periods. E.g. "J. Biol. Chem." will be mapped to a "JO" RIS element whereas "J Biol Chem" will be (incorrectly) mapped to a "JF" element ("Journal of Bio- logical Chemistry" would correctly end up here too). Spaces after peri- ods are optional. To capture "J Biol Chem" in a "JO" element, use the -j command line option or the "forcejabbrev" configuration file variable. * The mapping of BibTeX publication types (book, inproceedings...) to RIS types as specified in the configuration file is checked for valid RIS types. If an invalid RIS type is specified, an error is generated and the compile-time default is used instead. * By default the first names of authors and editors are not abbreviated. If you wish you can configure bib2ris to abbreviate first and middle names. FILES /usr/local/etc/refdb/bib2risrc The global configuration file of bib2ris. $HOME/.bib2risrc The user configuration file of bib2ris. SEE ALSO RefDB (7), refdb_latex2utf8txt (1), db2ris (1), en2ris (1), marc2ris (1), med2ris (1). RefDB manual (local copy) <prefix>/share/doc/refdb-<version>/refdb-man- ual/index.html RefDB manual (web) <[1]http://refdb.sourceforge.net/manual/index.html> RefDB on the web <[2]http://refdb.sourceforge.net/> AUTHOR bib2ris was written by Markus Hoenicka <markus@mhoenicka.de>. REFERENCES 1. http://refdb.sourceforge.net/manual/index.html http://refdb.sourceforge.net/manual/index.html 2. http://refdb.sourceforge.net/ http://refdb.sourceforge.net/ 2006-07-23 2005-10-16 BIB2RIS(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | DIAGNOSTICS | CONFIGURATION | DATA PROCESSING | FILES | SEE ALSO | AUTHOR | REFERENCES
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=bib2ris&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>