home | help
create_bmp...irc_in_rect(1)  General Commands Manual create_bmp...irc_in_rect(1)

NAME
     create_bmp_for_circ_in_rect - bitmap generator for a circular conductor in-
     side a rectangular conductor (part of atlc)

SYNOPSIS
     create_bmp_for_circ_in_rect [options... ] d W H x y Er outfile.bmp

WARNING
     This  man	page  is not a complete set of documentation - the complexity of
     the atlc project makes man pages not an ideal way to document it,	although
     out  of  completeness, man pages are produced.  The best documentation that
     was current at the time the version was produced should be  found	on  your
     hard drive, usually at
     /usr/local/share/atlc/docs/html-docs/index.html
     although  it  might  be elsewhere if your system administrator chose to in-
     stall the package elsewhere. Sometimes, errors are corrected in  the  docu-
     mentation	and  placed at http://atlc.sourceforge.net/ before a new release
     of atlc is released.  Please, if you notice a problem with  the  documenta-
     tion - even spelling errors and typos, please let me know.

DESCRIPTION
     create_bmp_for_circ_in_rect is a pre-processor for atlc, the finite differ-
     ence  program  that  is used to calculate the properties of a two-conductor
     electrical transmission line of arbitrary cross section. The  program  cre-
     ate_bmp_for_circ_in_rect is used as a fast way of generating bitmaps (there
     is  no  need  to use a graphics program), for a circular conductor inside a
     rectangular conductor, like this:

     --------------------------------------------------------  ^
     |							    |  |
     |							    |  |
     |							    |  |
     |							    |  |
     |							    |  |
     |		 Dielectric, permittivity=Er		    |  |
     |							    |  |
     |							    |  |
     |							    |  |
     |							    |  |
     |	       <------x------> ^			    |  H
     |	     *****	       |			    |  |
     |	  ***********	       y			    |  |
     |	 *************	       |			    |  |
     |	 **************        |			    |  |
     |	 <-----d------>        v			    |  |
     |	 ************** 				    |  |
     |	 *************					    |  |
     |	  ***********					    |  |
     |	      ***					    |  |
     |							    |  |
     -------------------------------------------------------   v
     <---------------------------W-------------------------->

     The parameters 'W' and 'H' and the inner dimensions of the outer conductor.
     The inner conductor has a diameter of 'd' and is offset from the centre  of
     the  outer conductor by an amount 'x' horizontally and 'y' vertically.  The
     space between the inner and outer conductors is a	dielectric  of	relative
     permittivity  'Er'.  If there is just a vacuum dielectric, then 'Er' should
     be set to 1.0

     The bitmap is printed to standard output, which MUST be re-directed to  ei-
     ther a file in one of the following two ways.

     create_bmp_for_circ_in_rect  d W H x y Er > filename.bmp OR
     create_bmp_for_circ_in_rect -f filename.bmp d W H x y Er

     The  bitmaps  produced by create_bmp_for_circ_in_rect are 24-bit bit colour
     bitmaps, as are required by atlc.

     The permittivities of the bitmap, set by 'Er', determine the colours in the
     bitmap. If Er1 is 1.0, 1.006, 2.1, 2.2, 2.33, 2.5, 3.3,  3.335,  3.7,  4.8,
     10.2  or 100 then the colour corresponding to that permittivity will be set
     according to the colours defined in COLOURS below. If  Er	is  not  one  of
     those  permittivities,  the  region  of  permittivity Er will be set to the
     colour 0xCAFF00. The program atlc does not know  what  these  permittivites
     are, so atlc, must be told with the -d command line option, as in example 4
     below.

OPTIONS
     -b bitmapsize
     is used to set the size of the bitmap, and so the accuracy to which atlc is
     able to calculate the transmission line's properties. The default value for
     'bitmapsize' is normally 4, although this is set at compile time. The value
     can be set anywhere from 1 to 15, but more than 8 is probably not sensible.

     -f outfile

     -v
     Causes  create_bmp_for_circ_in_rect  to  print  some  data to stderr. Note,
     nothing extra goes to standard output, as that is expected to be redirected
     to a bitmap file.

COLOURS
     The 24-bit bitmaps that atlc expects, have 8 bits assigned to represent the
     amount of red, 8 for blue and 8 for green. Hence there are  256  levels  of
     red, green and blue, making a total of 256*256*256=16777216 colours.  Every
     one  of the possible 16777216 colours can be defined precisely by the stat-
     ing the exact amount of red, green and blue, as in:

     red	 = 255,000,000 or 0xff0000
     green	 = 000,255,000 or 0x00ff00
     blue	 = 000,000,255 or 0x0000ff
     black	 = 000,000,000 or 0x000000
     white	 = 255,255,255 or 0xffffff
     Brown	 = 255,000,255 or 0xff00ff
     gray	 = 142,142,142 or 0x8e8e8e

     Some colours, such as pink, turquoise, sandy,  brown,  gray  etc  may  mean
     slightly different things to different people. This is not so with atlc, as
     the  program  expects  the  colours  below  to be EXACTLY defined as given.
     Whether you feel the colour is sandy or yellow is up to you, but if you use
     it in your bitmap, then it either needs to be a colour recognised by  atlc,
     or you must define it with a command line option (see OPTIONS and example 5
     below).
     The following conductors are recognised by atlc:
     red    = 255,000,000 or 0xff0000 is the live conductor.
     green  = 000,255,000 or 0x00ff00 is the grounded conductor.
     black  = 000,000,000 or 0x000000 is the negative conductor

     All  bitmaps  must  have the live (red) and grounded (green) conductor. The
     black conductor is not currently supported, but it will be used to indicate
     a negative conductor, which will be needed if/when  the  program  gets  ex-
     tended to analyse directional couplers.

     The  following  dielectrics  are  recognised by atlc and so are produced by
     create_bmp_for_circ_in_rect.

     white     255,255,255 or 0xFFFFFF as Er=1.0   (vacuum)
     white     255,202,202 or 0xFFCACA as Er=1.0006 (air)
     blue      000,000,255 or 0x0000FF as Er=2.1   (PTFE)
     Mid gray  142,242,142 or 0x8E8E8E as Er=2.2   (duroid 5880)
     mauve     255.000,255 or 0xFF00FF as Er=2.33  (polyethylene)
     yellow    255,255,000 or 0xFFFF00 as Er=2.5   (polystyrene)
     sandy     239,203,027 or 0xEFCC1A as Er=3.3   (PVC)
     brown     188,127,096 or 0xBC7F60 as Er=3.335 (epoxy resin)
     Turquoise 026,239,179 or 0x1AEFB3 as Er=4.8   (glass PCB)
     Dark gray 142,142,142 or ox696969 as Er=6.15  (duroid 6006)
     L. gray   240,240,240 or 0xDCDCDC as Er=10.2  (duroid 6010)
     D. Orange 213,160,077 or 0xD5A04D as Er=100   (for testing)
     If the permittivity is one not in the above list, then those parts  of  the
     image  with  Er1  will  be  set  to  0xCAFF00,  and those parts with Er2 to
     0xAC82AC.

EXAMPLES
     Here are a few examples of the use of  create_bmp_for_circ_in_rect.  Again,
     see the html documentation in atlc-X.Y.Z/docs/html-docs for more examples.

     In the first example, there is just an air dielectric, so Er1=Er2=1.0.  The
     inner of 1x1 inches (or mm, miles etc) is placed centrally in an outer with
     dimensions 3 x 3 inches.

     The exact place where the dielectric starts (a) and its width (d) are unim-
     portant, but they must still be entered.

     % create_bmp_for_circ_in_rect 3 3 1 1 1 1 1 1 > ex1.bmp
     % atlc ex1.bmp

     In  this  second  example, an inner of 15.0 mm x 0.5 mm is surrounded by an
     outer with internal dimensions of 61.5 x 20.1 mm. There is a material  with
     permittivity  2.1	(Er  of PTFE) below the inner conductor. The output from
     create_bmp_for_circ_in_rect is sent  to  a  file  ex1.bmp,  which	is  then
     processed by atlc

     % create_bmp_for_circ_in_rect 61.5 20.1 5 22 0.5 50 15 5 1.0 2.1 > ex2.bmp
     % atlc ex2.bmp

     In  example  3, the bitmap is made larger, to increase accuracy, but other-
     wise   this   is	identical   to	 the	second	  example.     %    cre-
     ate_bmp_for_circ_in_rect -b7 61.5 20.1 5 22 0.5 50 15 5 1.0 2.1 > ex3.bmp
     % atlc ex3.bmp

     In     the     fourth     example,    instead    of    re-directing    cre-
     ate_bmp_for_circ_in_rect's output to a file with the > sign, it is done us-
     ing the -f option.
     % create_bmp_for_circ_in_rect -f ex4.bmp 61.5 20.1 5 22 0.5 50 15 5 1.0 2.1
     % atlc ex4.bmp

     In the fifth example, materials with permittivites 2.78 and 7.89 are  used.
     While  there  is no change in how to use create_bmp_for_circ_in_rect, since
     these permittivities are not known, we must tell atlc  what  they	are.   %
     create_bmp_for_circ_in_rect  61 20 1 4 22 0.5 50 15 5 2.78 7.89 > ex5.bmp %
     atlc -d CAFF00=2.78 -d AC82AC=7.89 ex5.bmp In the sixth and final	example,
     the  -v  option  is  used	to  print  some  extra	data to stderr from cre-
     ate_bmp_for_circ_in_rect.

SEE ALSO
     atlc(1) create_bmp_for_circ_in_circ(1) create_bmp_for_microstrip_coupler(1)
     create_bmp_for_rect_cen_in_rect(1)     create_bmp_for_rect_cen_in_rect_cou-
     pler(1)  create_bmp_for_rect_in_circ(1) create_bmp_for_rect_in_rect(1) cre-
     ate_bmp_for_stripline_coupler(1)	 create_bmp_for_symmetrical_stripline(1)
     design_coupler(1)	find_optimal_dimensions_for_microstrip_coupler(1)  read-
     bin(1)

     http://atlc.sourceforge.net		- Home page
     http://sourceforge.net/projects/atlc	- Download area
     atlc-X.Y.Z/docs/html-docs/index.html	- HTML docs
     atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
     atlc-X.Y.Z/examples			- examples

Dr. David Kirkby	       atlc-4.4.2 10/09/03   create_bmp...irc_in_rect(1)

home | help