home | help
create_bmp...rip_coupler(1)  General Commands Manual create_bmp...rip_coupler(1)

NAME
     create_bmp_for_microstrip_coupler - bitmap generator for microstrip coupler
     (part of atlc)

SYNOPSIS
     create_bmp_for_microstrip_coupler	[-b  bmp_size]	[-v]  w  s g h t Er1 Er2
     filename

WARNING
     This man page is not a complete set of documentation -  the  complexity  of
     the  atlc project makes man pages not an ideal way to document it, although
     out of completeness, man pages are produced.  The best  documentation  that
     was  current  at  the time the version was produced should be found on your
     hard drive, usually at
     /usr/local/share/atlc/docs/html-docs/index.html
     although it might be elsewhere if your system administrator  chose  to  in-
     stall  the  package elsewhere. Sometimes, errors are corrected in the docu-
     mentation and placed at http://atlc.sourceforge.net/ before a  new  release
     of  atlc  is released.  Please, if you notice a problem with the documenta-
     tion - even spelling errors and typos, please let me know.

DESCRIPTION
     create_bmp_for_microstrip_coupler is a pre-processor for atlc, part of atlc
     properties of a two and three conductor electrical transmission line of ar-
     bitrary cross section.  The  program  create_bmp_for_microstrip_coupler  is
     used  as a fast way of generating bitmaps (there is no need to use a graph-
     ics program), for microstrip couplers. Hence if the dimensions of a coupler
     are known the odd mode, even mode, differential mode and common mode imped-
     ances can be found. If you know what impedances you  require  and	want  to
     find  the	dimentions, then use find_optimal_dimensions_for_microstrip_cou-
     pler instead. This makes repeated calls to   create_bmp_for_microstrip_cou-
     pler.  The  structure for which bitmaps are generated by create_bmp_for_mi-
     crostrip_coupler is shown below.

     GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG  ^
     G							   G  |
     G							   G  |
     G							   G  |
     G							   G  |
     G							   G  |
     G							   G  |
     G |						   G  |
     G |						   G  |
     G |						   G  H
     G v       <--g--><--w--><---s---><--w--><--g-->	   G  |
     GGGGGGGGGG       ccccccc	      ccccccc	    GGGGGGGG  |
     GGGGGGGGGG.......ccccccc.........ccccccc.......GGGGGGGG  |
     G.^.....................................^.............G  |
     G.|.....................................|.............G  |
     G.|t.Dielectric, permittivity=Er2.......h.............G  |
     G.|...(3.7 for FR4 PCB).................|.............G  |
     G.......................................V.............G  |
     GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG  |
     GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG. v
     <------------------------W---------------------------->

     The parameters 'W' and 'H' and the inner dimensions of the a  metal  enclo-
     sure.  These will generall be quite large compared to the dimensions of the
     the PC - the diagram above is not to scale.  The gap between the  two  cou-
     pled  lines  is  s, the width of the coupled lines is w and the spacing be-
     tween the edges of the coupled lines and the groundplane on the top  is  g.
     Often,  the  upper  groundplane is not close to the coupled lines, in which
     case g will be quite large. The thickness of the dielectic is h. Note  that
     he  is just the dielectric, and does not include the thichkness of the cop-
     per on the double-sided PCB. The thickness of copper on the top layer is t.
     It is immaterial what the thickkness of the lower layer  is.  The	relative
     permittivity  above  the dielectric is normally 1, but the relative permit-
     tivity of the dielectric material will need to be either pre-defined or de-
     fined on the command lines. See the section colours below for more informa-
     tion on dielectrics.

     The bitmap is printed to the file specified as the last argument

     The bitmaps produced by create_bmp_for_microstrip_coupler	are  24-bit  bit
     colour bitmaps, as are required by atlc.

     The  permittivities  of  the  bitmap, set by 'Er1' and 'Er2', determine the
     colours in the bitmap. If Er1 or Er2 is 1.0, 1.0006, 2.1, 2.2,  2.33,  2.5,
     3.3,  3.335,  3.7,  4.8, 10.2 or 100, then the colour corresponding to that
     permittivity will be set according to the colours defined in COLOURS below.
     If Er1 is not one of those permittivities, the region of  permittivity  Er1
     will be set to the colour 0xCAFF00. If Er2 is not one of those values, then
     the  region  of  the  image will be set to the colour 0xAC82AC. The program
     atlc does not know what these two permittivites are, so they atlc, must  be
     told with the comand line option -d, as in example 4 below.

OPTIONS
     -C  Causes create_bmp_for_microstrip_coupler to print copyright and licens-
     ing information.  -b bitmapsize
     is used to set the size of the bitmap, and so the accuracy to which atlc is
     able to calculate the transmission line's properties. The default value for
     'bitmapsize' is normally 4, although this is set at compile time. The value
     can be set anywhere from 1 to 15, but more than 8 is probably not sensible.

     -v
     Causes create_bmp_for_microstrip_coupler to  print  some  data  to  stderr.
     Note,  nothing  extra  goes  to  standard output, as that is expected to be
     redirected to a bitmap file.

COLOURS
     The 24-bit bitmaps that atlc expects, have 8 bits assigned to represent the
     amount of red, 8 for blue and 8 for green. Hence there are  256  levels  of
     red, green and blue, making a total of 256*256*256=16777216 colours.  Every
     one  of the possible 16777216 colours can be defined precisely by the stat-
     ing the exact amount of red, green and blue, as in:

     red	 = 255,000,000 or 0xff0000
     green	 = 000,255,000 or 0x00ff00
     blue	 = 000,000,255 or 0x0000ff
     black	 = 000,000,000 or 0x000000
     white	 = 255,255,255 or 0xffffff
     Brown	 = 255,000,255 or 0xff00ff
     gray	 = 142,142,142 or 0x8e8e8e

     Some colours, such as pink, turquoise, sandy,  brown,  gray  etc  may  mean
     slightly different things to different people. This is not so with atlc, as
     the  program  expects  the  colours  below  to be EXACTLY defined as given.
     Whether you feel the colour is sandy or yellow is up to you, but if you use
     it in your bitmap, then it either needs to be a colour recognised by  atlc,
     or you must define it with a command line option (see OPTIONS and example 5
     below).
     red    = 255,000,000 or 0xFF0000 is the live conductor.
     green  = 000,255,000 or 0x00FF00 is the grounded conductor.
     blue   = 000,000,000 or 0x0000FF is the negative conductor

     All  bitmaps  must  have the live (red) and grounded (green) conductor. The
     blue conductor is not currently supported, but it will be used to	indicate
     a	negative  conductor,  which  will be needed if/when the program gets ex-
     tended to analyse directional couplers.

     The following dielectrics are recognised by atlc and  so  are  produced  by
     create_bmp_for_rect_cen_in_rect.

     white     255,255,255 or 0xFFFFFF as Er=1.0    (vacuum)
     pink      255,202,202 or 0xFFCACA as Er=1.0006 (air)
     L. blue   130,052,255 or 0x8235EF as Er=2.1    (PTFE)
     Mid gray  142,242,142 or 0x8E8E8E as Er=2.2    (duroid 5880)
     mauve     255.000,255 or 0xFF00FF as Er=2.33  (polyethylene)
     yellow    255,255,000 or 0xFFFF00 as Er=2.5    (polystyrene)
     sandy     239,203,027 or 0xEFCC1A as Er=3.3    (PVC)
     brown     188,127,096 or 0xBC7F60 as Er=3.335  (epoxy resin)
     Turquoise 026,239,179 or 0x1AEFB3 as Er=4.8    (glass PCB)
     Dark gray 142,142,142 or 0x696969 as Er=6.15   (duroid 6006)
     L. gray   240,240,240 or 0xDCDCDC as Er=10.2  (duroid 6010)
     D. orange 213,160,067 or 0xD5A04D as Er=100.0 (mainly for test purposes)

EXAMPLES
     Here  are	a  few examples of the use of create_bmp_for_microstrip_coupler.
     Again, see the html documentation	in  atlc-X.Y.Z/docs/html-docs/index.html
     for more examples.

     In the first example, there is just an air dielectric, so Er1=Er2=1.0.  The
     inner of 1x1 inches (or mm, miles etc) is placed centrally in an outer with
     dimensions 3 x 3 inches.

     The exact place where the dielectric starts (a) and its width (d) are unim-
     portant, but they must still be entered.

     % create_bmp_for_microstrip_coupler 3 3 1 1 1 1 1 1 > ex1.bmp
     % atlc ex1.bmp

     In  this  second  example, an inner of 15.0 mm x 0.5 mm is surrounded by an
     outer with internal dimensions of 61.5 x 20.1 mm. There is a material  with
     permittivity  2.1	(Er  of PTFE) below the inner conductor. The output from
     create_bmp_for_microstrip_coupler is sent to a file ex1.bmp, which is  then
     processed by atlc

     %	create_bmp_for_microstrip_coupler  61.5  20.1 5 22 0.5 50 15 5 1.0 2.1 >
     ex2.bmp
     % atlc ex2.bmp

     In example 3, the bitmap is made larger, to increase accuracy,  but  other-
     wise  this  is  identical	to  the  second  example.   % create_bmp_for_mi-
     crostrip_coupler -b7 61.5 20.1 5 22 0.5 50 15 5 1.0 2.1 > ex3.bmp
     % atlc ex3.bmp

     In the fourth example, materials with permittivites 2.78 and 7.89 are used.
     While there is no change in how to  use  create_bmp_for_microstrip_coupler,
     since  these permittivities are not known, we must tell atlc what they are.
     % create_bmp_for_microstrip_coupler 61 20 1 4 22 0.5 50 15 5  2.78  7.89  >
     ex5.bmp % atlc -d CAFF00=2.78 -d AC82AC=7.89 ex5.bmp In the sixth and final
     example, the -v option is used to print some extra data to stderr from cre-
     ate_bmp_for_microstrip_coupler.

SEE ALSO
     atlc(1)  create_bmp_for_circ_in_circ(1) create_bmp_for_circ_in_rect(1) cre-
     ate_bmp_for_rect_cen_in_rect(1)  create_bmp_for_rect_cen_in_rect_coupler(1)
     create_bmp_for_rect_in_circ(1)   create_bmp_for_stripline_coupler(1)   cre-
     ate_bmp_for_symmetrical_stripline(1) design_coupler(1)  find_optimal_dimen-
     sions_for_microstrip_coupler(1) readbin(1)

     http://atlc.sourceforge.net		- Home page
     http://sourceforge.net/projects/atlc	- Download area
     atlc-X.Y.Z/docs/html-docs/index.html	- HTML docs
     atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
     atlc-X.Y.Z/examples			- examples

Dr. David Kirkby	    atlc-4.4.2 10th Sept 2003create_bmp...rip_coupler(1)

home | help