home | help
create_bmp..._stripline(1)   General Commands Manual  create_bmp..._stripline(1)

NAME
     create_bmp_for_symmetrical_stripline  - bitmap generator for thin conductor
     between two infinite groundplanes (part of atlc)

SYNOPSIS
     create_bmp_for_symmetrical_stripline [-v] W H w bitmapfile

WARNING
     This man page is not a complete set of documentation -  the  complexity  of
     the  atlc project makes man pages not an ideal way to document it, although
     out of completeness, man pages are produced.  The best  documentation  that
     was  current  at  the time the version was produced should be found on your
     hard drive, usually at
     /usr/local/share/atlc/docs/html-docs/index.html
     although it might be elsewhere if your system administrator  chose  to  in-
     stall  the  package elsewhere. Sometimes, errors are corrected in the docu-
     mentation and placed at http://atlc.sourceforge.net/ before a  new  release
     of  atlc  is released.  Please, if you notice a problem with the documenta-
     tion - even spelling errors and typos, please let me know.

DESCRIPTION
     create_bmp_for_symmetrical_stripline is a pre-processor for atlc,	the  fi-
     nite  difference program that is used to calculate the properties of a two-
     conductor electrical transmission line of arbitrary cross section. The pro-
     gram create_bmp_for_symmetrical_stripline is used as a fast way of generat-
     ing bitmaps (there is no need to use a graphics program),	for  a	1  pixel
     thick conductor of width w, centrally located inside a pair of groundplanes
     of  width W and separation H. This has an exact analytical answer, when the
     inner is infinitely thin and the width W is infinitely wide. This theoreti-
     cal  impedance  is  also	calculated   by   the	create_bmp_for_symmetri-
     cal_stripline. It is therefore used as a test of atlc.

     -----------------------------------------------------  ^
     |							 |  |
     |							 |  |
     |		    <----------w----------->		 |  |
     |							 |  H
     |							 |  |
     |							 |  |
     -----------------------------------------------------  v
     <-------------------------W------------------------->

     The parameters 'W' and 'H' and the inner dimensions of the outer conductor.
     The outer dimensions of the inner conductor are 'w' and 'c'. The inner con-
     ductor is assumed to rest on a dielectric (Er2) which is 'd' wide and outer
     conductor	an the inner conductor is offset 'b' from the left hand sidewall
     of the outer conductor. The whole region is surrounded by a  dielectric  of
     relative permittivity 'Er1'. The dielectrics 'Er1' and then 'Er1' and 'Er2'
     will both be 1.0

     The bitmaps produced by create_bmp_for_symmetrical_stripline are 24-bit bit
     colour bitmaps, as are required by atlc. Currently create_bmp_for_symmetri-
     cal_stripline only produces bitmaps with white (vacuum) dielectrics.

OPTIONS
     -v
     Print the theoeretical impedance Zo. This only works if the width W is suf-
     ficiently	wide,  otherwise  atlc and the value printed here would disagree
     wildly.

SEE ALSO
     atlc(1) create_bmp_for_circ_in_circ(1) create_bmp_for_circ_in_rect(1)  cre-
     ate_bmp_for_microstrip_coupler(1)	create_bmp_for_rect_cen_in_rect(1)  cre-
     ate_bmp_for_rect_cen_in_rect_coupler(1) create_bmp_for_rect_in_circ(1) cre-
     ate_bmp_for_rect_in_rect(1) create_bmp_for_stripline_coupler(1) design_cou-
     pler(1) find_optimal_dimensions_for_microstrip_coupler(1) readbin(1)

     http://atlc.sourceforge.net		- Home page
     http://sourceforge.net/projects/atlc	- Download area
     atlc-X.Y.Z/docs/html-docs/index.html	- HTML docs
     atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
     atlc-X.Y.Z/examples			- examples

Dr. David Kirkby	  atlc-4.6.0 8th December 2003create_bmp..._stripline(1)

home | help