FreeBSD Manual Pages
CTLINND(8) InterNetNews Documentation CTLINND(8) NAME ctlinnd - Control the main InterNetNews daemon SYNOPSIS ctlinnd [-hs] [-t timeout] [command [argument ...]] DESCRIPTION ctlinnd sends a message to the control channel of innd(8), the main Inter- NetNews daemon. In the normal mode of behavior, the message is sent to the server, which then performs the requested action and sends back a reply with a text mes- sage and an exit code for ctlinnd. If the server successfully performed the command, ctlinnd will print the reply on standard output and exit with a status of zero. If the server could not perform the command, it will di- rect ctlinnd to exit with a status of one. By default, ctlinnd will wait forever for a response from innd; this can be changed with the -t flag. The "shutdown", "xabort", and "xexec" commands do not generate a reply, since they cause innd to exit. After these commands, ctlinnd will always exit silently with a status of zero. OPTIONS -h Prints a command summary. If a command is given along with the -h flag, only the usage for that command will be given. -s If the command was successful, don't print the output from innd. -t timeout Specifies how long to wait for the reply from the server, for commands other than "shutdown", "xabort", and "xexec". timeout is the number of seconds to wait. A value of zero says to wait forever, and a value less than zero says not to wait at all but just exit immediately with status zero. When waiting for a reply, ctlinnd will check every two minutes to be sure the server is still running, to make it less likely that ctlinnd will just hang. The default is zero, indicating that ctlinnd should wait forever. COMMANDS Here is the complete list of supported commands. Note that nearly all com- mands have a fixed number of arguments. If a parameter may be an empty string, it is still necessary to pass the empty string to ctlinnd as an ar- gument (specified in the shell as two adjacent quotes, like ''). addhist message-id arrival expires posted token Add an entry to the history database for message-id. The angle brack- ets around message-id are optional. It should normally be protected from the shell with single quotes. arrival, expires, and posted should be the number of seconds since epoch and indicate when the article arrived, when it expires (via the Expires header field), and when it was posted (given in the Date header field), respectively. expires should be 0 if the article doesn't have an Expires header field. token is the storage API token for the arti- cle, and may be empty. This command can only be used while the server is running, and will be rejected if the server is paused or throttled. allow reason Allow remote connections, reversing a prior "reject" command. reason must be the same text given to the "reject" command, or the empty string (which matches any reason). begin site Begin feeding site. The server will rescan the newsfeeds file to find the specified site and set up a news feed for it. If the site already existed, a "drop" for that site is done first. This command is for- warded; see "NOTES" below. cancel message-id Remove the article with the specified message-ID from the local system. This does not generate a cancel control message; it only affects the local system. The angle brackets around message-ID are optional. It should normally be protected from the shell with single quotes (and not double quotes). For instance: ctlinnd cancel 'test@foo.bar' Note that the history database is updated with the specified Message-ID so if an article with the same Message-ID is afterwards received, it will be rejected; it is useful for rejecting spam before it arrives. If the server is throttled manually, this command causes it to briefly open the history database. If the server is paused or throttled for any other reason, this command is rejected. changegroup group status The newsgroup group is changed so that its status (the fourth field in the active file) becomes status. This may be used to make an existing group moderated or unmoderated, for example. This command, unlike "newgroup" or "rmgroup", can only be used while the server is running, and will be rejected if the server is paused or throttled. checkfile Check the syntax of the newsfeeds file and display a message if any er- rors are found. The details of the errors are reported to syslog. drop site Flush and drop site from the server's list of active feeds. This com- mand is forwarded; see "NOTES" below. feedinfo site Print detailed information about the state of the feed to site, or brief status about all feeds if site is the empty string. flush site Flush the buffer for the specified site. The action taken depends on the type of feed the site receives; see newsfeeds(5) for more informa- tion. This is useful when the site is being fed by a file and batching is about to start, or to cleanly shut down and respawn a channel feed. If site is an empty string, all sites are flushed and the active file and history database are also flushed to disk. This command is for- warded; see "NOTES" below. Flushing the innfeed channel feed is the recommended method of restart- ing innfeed to pick up new configuration. innd will spawn a new inn- feed process while the old process shuts down cleanly. flushlogs Close the news and error log files and rename them to add ".old" to the file name, then open fresh news and error logs. The active file and history database are also flushed to disk. Exploder and process chan- nels are reopened so that they properly take into account the new log files. go reason Re-open the history database and start accepting articles again, re- versing a previous "pause" or "throttle" command. reason must be ei- ther the empty string or match the text that was given to the earlier "pause" or "throttle" command. If a "reject" command is in effect, this will also reverse it by doing the equivalent of an "allow" command if the reason matches reason. Likewise, if a "reserve" command had been given, this will clear the reservation if reason matches the text that was given to "reserve". The history database is automatically closed on "throttle" or "pause" and reopened on "go", so the history database can be replaced during the pause or throttle without requiring an explicit "reload" command. If any other configuration files or the active file were modified, a "reload" command should be given to force the server to re-read those files. If the server throttled itself because it accumulated too many I/O er- rors, this command will reset the error count. If innd was not started with the -n y flag, this command also does the equivalent of a "readers" command with "yes" as the flag and reason as the text. hangup channel Close the socket for the specified incoming channel. This may be use- ful when an incoming connection appears to be hung (although innd will close idle connections automatically after a timeout, as set with peer- timeout in inn.conf). help [command] Print a command summary for all commands, or just command if one is specified. This is equivalent to the -h option. kill signal site Signal signal is sent to the process underlying the specified site, which must be a channel or exploder feed. signal may be a numeric sig- nal number or one of "hup", "int", or "term"; case is not significant. logmode Cause the server to log its current operating mode to syslog. lowmark file Reset the low water marks in the active file based on the contents of file. Each line in file must be of the form: group low-value For example: comp.lang.c++ 243 This command is mostly used by news.daily to update the active file af- ter nightly expiration. modePrint the server's operating mode as a multi-line summary of the para- meters and the operating state. The parameters in the output corre- spond to command-line flags to innd and give the current settings of those parameters that can be overridden by command-line flags. name channel Print the name and relevant information for the given incoming or out- going channel number, or for all channels if channel is an empty string. The response is formatted as: <name>:<number>:<type>:<idle>:<status> where <name> is the name of the channel, <number> is its number (gener- ally the same as the file descriptor assigned to it), <idle> is the idle time for an NNTP channel or the process ID for a process channel, and <status> is the status for NNTP channels. The <type> field is one of the following values: control Control channel for ctlinnd file An outgoing file feed localconn Local channel used by nnrpd and rnews for posting nntp NNTP channel for remote connections proc The process for a process feed remconn The channel that accepts new remote connections Channel status indicates whether the channel is paused or not. Nothing is shown unless the channel is paused, in which case "paused" is shown. A channel will be paused automatically if the number of remote connec- tions for that label in incoming.conf is greater than max-connections within hold-time seconds. newgroup group [status [creator]] Create the specified newsgroup. The status parameter is the fourth field of the active file entry, as described in active(5). If it is not an equal sign, only the first character is used. creator should be the identity of the person creating the group. If the newsgroup al- ready exists, this is equivalent to the "changegroup" command. creator, encoded in UTF-8 if given, may be omitted; if so, it will de- fault to the newsmaster (as specified at configure time, normally "usenet"). status may also be omitted; if so, it will default to "y" (a normal, unmoderated group). The combination of defaults make it possible to use the text of the Control header field directly (although don't do this without checking the syntactic validity of the header field first). This command can only be done while the server is running or throttled manually. It will update its internal state when a "go" command is sent. This command updates the active.times file as well. This com- mand is forwarded; see "NOTES" below. param letter value Change the specified server parameter. letter is the innd command-line option to set and value is the new value. For example: ctlinnd param i 5 would direct the server to allow only five incoming connections. To enable or disable the action of the -n flag, use "n" for the letter and "y" or "n", respectively, for the value. The supported values for letter are "a", "c", "H", "i", "l", "n", "o", "T", "t", and "X". pause reason Pause the server so that no incoming articles are accepted. No exist- ing connections are closed, but the history database is closed. This should be used for short-term locks, such as when replacing the history database. If the server was not started with the -n y flag, this com- mand also does the equivalent of a "readers" command with "no" as the flag and reason as the text, encoded in UTF-8. perl flag Enable or disable Perl filtering on every article received by innd. This command is only available if INN was built with Perl filtering support. If flag starts with "y", filtering is enabled; if it starts with "n", filtering is disabled. When filtering is disabled, if the filter_innd.pl Perl filter defined a function "filter_end", it will be called prior to the deactivation of the filter. Note that enabling or disabling Perl filtering on every post received by nnrpd is parameterized with the perlfilter access parameter in read- ers.conf. python flag Enable or disable Python filtering on every article received by innd. This command is only available if INN was built with Python filtering support. If flag starts with "y", filtering is enabled; if it starts with "n", filtering is disabled. readers flag text Allow or disallow readers. If flag starts with the letter "n", then reading is disallowed by causing the server to pass text as the value of the -r flag to nnrpd. If flag starts with the letter "y" and text is either an empty string or the same string, encoded in UTF-8, that was used when reading was disabled, reading will be re-enabled. The advantage of this parameter over noreader in inn.conf is that it permits specifying a custom message. This command has no effect if nnrpd is being run separately rather than spawned by innd. reject reason Remote connections (those that would not be handed off to nnrpd) are rejected with reason given as the explanation, encoded in UTF-8. Ex- isting connections are not closed. reload what reason Update the in-memory copy of server configuration files. what identi- fies what should be reloaded, and reason is reported to syslog in the message noting the reload. There is no way to reload inn.conf, storage.conf, or other configura- tion files for the storage or overview backends. To pick up changes to those files, use "ctlinnd xexec innd" to restart innd. If what is the empty string or the word "all", everything is reloaded. If it is the word "history", the history database is closed and re- opened. If it is the word "incoming.conf", the corresponding file is reloaded. If it is the word "active" or "newsfeeds", both the active and newsfeeds files are reloaded, which will also cause all outgoing feeds to be flushed and restarted. If what is the word "filter.perl", the filter_innd.pl file is reloaded. (This file is however not available for reloading unless INN was com- piled with Perl filtering support.) If the Perl filter defined a func- tion "filter_before_reload", it will be called prior to re-reading fil- ter_innd.pl. If the Perl function "filter_after_reload" is defined, it will be called after filter_innd.pl has been reloaded. Reloading the Perl filter does not enable filtering if it has been disabled; use "perl y" to do this instead. startup_innd.pl cannot be reloaded. If what is the word "filter.python", the filter_innd.py file is re- loaded. (This file is however not available for reloading unless INN was compiled with Python filtering support.) If a Python method named "filter_before_reload" exists, it will be called prior to re-reading filter_innd.py. If a Python method named "__init__" exists, it will be called after filter_innd.py has been reloaded. Reloading the Python filter does not enable filtering if it has been disabled; use "python y" to do this. renumber group Update the low water and high water marks for group in the active file based on the information in the overview database. Regardless of the contents of the overview database, the high water mark will not be de- creased. (Decreasing it may cause duplicate article numbers to be as- signed after a crash, which can cause serious problems with the trad- spool storage method.) If group is the empty string, all newsgroups are renumbered. Renumber only works if overview data has been created (if enableoverview is set to true in inn.conf). renumberlow file Identical to the "lowmark" command. reserve reason Require the next "pause" or "throttle" command to use reason as its reason, encoded in UTF-8. This reservation is cleared by giving an empty string for the reason. This is used by programs like expire to coordinate pauses and throttles of the server and avoid trampling on other instances of themselves. rmgroup group Remove the specified newsgroup. The group is removed from the active file and its overview information is purged, making it immediately un- available to readers. Unlike the "newgroup" command, this command does not update the active.times file. This command can only be done while the server is running or throttled manually. This command is forwarded; see "NOTES" below. send feed text The specified text is sent as a control line to the exploder feed. shutdown reason The server is shut down, with the specified reason recorded in the log and sent to all open connections. It is a good idea to send a "throt- tle" command first so that feeds can be shut down more gracefully. If Perl or Python filtering is compiled in and enabled, certain func- tions are called at "throttle" or "shutdown" (to save filter state to disk, for example). Consult the embedded filter documentation for de- tails. stathist (off | filename) Enable or disable generation of history performance statistics. If the parameter is "off", no statistics are gathered. Otherwise, statistics are written to the specified file. A parser for this file is provided in the contrib tree of the INN distribution. See stathist in inn.conf(5) for information on how to set the default. status (off | interval) Adjust the frequency with which innd reports status information to sys- log. Status reporting is turned off if "off" or 0 is given as the ar- gument. Otherwise, status will be reported every interval seconds. See status in inn.conf(5) for information on how to set the default. throttle reason Close all existing incoming connections and outgoing feeds, and reject new connections. Close the history database. This should be used for long-term locks or for running a large number of "newgroup" and "rm- group" commands without restarting all outgoing feeds between each one. (Note that changing the status of existing newsgroups when the server is throttled cannot be done.) If the server was not started with the -n y flag, then this command also does the equivalent of a "readers" command with "no" as the flag and reason as the text, encoded in UTF-8. timer (off | interval) Adjust the frequency with which innd reports performance information to syslog. Performance monitoring is turned off if "off" or 0 is given as the argument. Otherwise, statistics will be reported every interval seconds to syslog. See timer in inn.conf(5) for information on how to set the default. trace item flag Turn tracing on or off for the specified item. flag should start with the letter "y" or "n" to turn tracing on or off, respectively. If item starts with a number, tracing is set up for the specified innd channel, which must be an incoming NNTP feed. If it starts with the letter "i", general innd tracing is turned on or off. If it starts with the letter "n", future nnrpd processes spawned by "innd" will or will not be passed the -t flag, as appropriate. This will not affect any nnrpd processes already running, or nnrpd processes started by some means other than innd. xabort reason Log the specified reason and then abort. On most systems, this will cause innd to dump a core file. This is only useful for debugging. xexec path Shut down the server, but then rather than exiting, exec innd with all of its original arguments except for -r. path may be either "innd" or an empty string, both of which are equivalent. Any other value is an error. This is the easiest way to start a new copy of innd after upgrading or reload configuration files that can't be reloaded via the "reload" com- mand. NOTES In addition to being acted on by the server, certain commands can be for- warded to an appropriate child process. If the site receiving the command is an exploder (such as buffchan) or a funnel that feeds into an exploder, the command can be forwarded. In this case, the server will send a command line to the exploder that consists of the ctlinnd command name. If the site funnels into an exploder that has an asterisk ("*") in its "W" flag (see newsfeeds(5) for more information on feed specifications), the site name will be appended to the command; otherwise, no argument is appended. BUGS ctlinnd uses Unix domain sockets on most systems to communicate with innd and is therefore limited by whatever maximum packet size the operating sys- tem imposes on Unix domain datagrams. This may mean that server replies are limited to 4 KB on some systems. HISTORY Written by Rich $alz <rsalz@uunet.uu.net> for InterNetNews. Rewritten in POD by Russ Allbery <eagle@eyrie.org>. SEE ALSO active(5), active.times(5), buffchan(8), incoming.conf(5), innd(8), inn.conf(5), libinn_inndcomm(3), newsfeeds(5), nnrpd(8). INN 2.8.0 2024-01-21 CTLINND(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | NOTES | BUGS | HISTORY | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ctlinnd&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>