dcm2xml(1) OFFIS DCMTK dcm2xml(1) NAME dcm2xml - Convert DICOM file and data set to XML SYNOPSIS dcm2xml [options] dcmfile-in [xmlfile-out] DESCRIPTION The dcm2xml utility converts the contents of a DICOM file (file format or raw data set) to XML (Extensible Markup Language). There are two output formats. The first one is specific to DCMTK with its DTD (Document Type De- finition) described in the file dcm2xml.dtd. The second one refers to the 'Native DICOM Model' which is specified for the DICOM Application Hosting service found in DICOM part 19. If dcm2xml reads a raw data set (DICOM data without a file format meta- header) it will attempt to guess the transfer syntax by examining the first few bytes of the file. It is not always possible to correctly guess the transfer syntax and it is better to convert a data set to a file format whenever possible (using the dcmconv utility). It is also possible to use the -f and -t[ieb] options to force dcm2xml to read a data set with a par- ticular transfer syntax. PARAMETERS dcmfile-in DICOM input filename to be converted ("-" for stdin) xmlfile-out XML output filename (default: stdout) OPTIONS general options -h --help print this help text and exit --version print version information and exit --arguments print expanded command line arguments -q --quiet quiet mode, print no warnings and errors -v --verbose verbose mode, print processing details -d --debug debug mode, print debug information -ll --log-level [l]evel: string constant (fatal, error, warn, info, debug, trace) use level l for the logger -lc --log-config [f]ilename: string use config file f for the logger input options input file format: +f --read-file read file format or data set (default) +fo --read-file-only read file format only -f --read-dataset read data set without file meta information input transfer syntax: -t= --read-xfer-auto use TS recognition (default) -td --read-xfer-detect ignore TS specified in the file meta header -te --read-xfer-little read with explicit VR little endian TS -tb --read-xfer-big read with explicit VR big endian TS -ti --read-xfer-implicit read with implicit VR little endian TS long tag values: +M --load-all load very long tag values (e.g. pixel data) -M --load-short do not load very long values (default) +R --max-read-length [k]bytes: integer (4..4194302, default: 4) set threshold for long values to k kbytes processing options specific character set: +Cr --charset-require require declaration of extended charset (default) +Ca --charset-assume [c]harset: string assume charset c if no extended charset declared +Cc --charset-check-all check all data elements with string values (default: only PN, LO, LT, SH, ST, UC and UT) # this option is only used for the extended check whether # the Specific Character Set (0008,0005) attribute should be # present, but not for the conversion of unaffected element # values to UTF-8 (e.g. element values with a VR of CS) +U8 --convert-to-utf8 convert all element values that are affected by Specific Character Set (0008,0005) to UTF-8 # requires support from an underlying character encoding # library (see output of --version on which one is available) output options general XML format: -dtk --dcmtk-format output in DCMTK-specific format (default) -nat --native-format output in Native DICOM Model format (part 19) +Xn --use-xml-namespace add XML namespace declaration to root element DCMTK-specific format (not with --native-format): +Xd --add-dtd-reference add reference to document type definition (DTD) +Xe --embed-dtd-content embed document type definition into XML document +Xf --use-dtd-file [f]ilename: string use specified DTD file (only with +Xe) (default: /usr/local/share/dcmtk-<VERSION>/dcm2xml.dtd) +Wn --write-element-name write name of the DICOM data elements (default) -Wn --no-element-name do not write name of the DICOM data elements +Wb --write-binary-data write binary data of OB and OW elements (default: off, be careful with --load-all) encoding of binary data: +Eh --encode-hex encode binary data as hex numbers (default for DCMTK-specific format) +Eu --encode-uuid encode binary data as a UUID reference (default for Native DICOM Model) +Eb --encode-base64 encode binary data as Base64 (RFC 2045, MIME) DCMTK Format The basic structure of the DCMTK-specific XML output created from a DICOM file looks like the following: <?xml version="1.0" encoding="ISO-8859-1"?> <!DOCTYPE file-format SYSTEM "dcm2xml.dtd"> <file-format xmlns="http://dicom.offis.de/dcmtk"> <meta-header xfer="1.2.840.10008.1.2.1" name="Little Endian Explicit"> <element tag="0002,0000" vr="UL" vm="1" len="4" name="MetaElementGroupLength"> 166 </element> ... <element tag="0002,0013" vr="SH" vm="1" len="16" name="ImplementationVersionName"> OFFIS_DCMTK_353 </element> </meta-header> <data-set xfer="1.2.840.10008.1.2" name="Little Endian Implicit"> <element tag="0008,0005" vr="CS" vm="1" len="10" name="SpecificCharacterSet"> ISO_IR 100 </element> ... <sequence tag="0028,3010" vr="SQ" card="2" name="VOILUTSequence"> <item card="3"> <element tag="0028,3002" vr="xs" vm="3" len="6" name="LUTDescriptor"> 256 8 </element> ... </item> ... </sequence> ... <element tag="7fe0,0010" vr="OW" vm="1" len="262144" name="PixelData" loaded="no" binary="hidden"> </element> </data-set> </file-format> The 'file-format' and 'meta-header' tags are absent for DICOM data sets. XML Encoding Attributes with very large value fields (e.g. pixel data) are not loaded by default. They can be identified by the additional attribute 'loaded' with a value of 'no' (see example above). The command line option --load-all forces to load all value fields including the very long ones. Furthermore, binary data of OB and OW attributes are not written to the XML output file by default. These elements can be identified by the additional attribute 'binary' with a value of 'hidden' (default is 'no'). The command line option --write-binary-data causes also binary value fields to be printed (attribute value is 'yes' or 'base64'). But, be careful when using this option together with --load-all because of the large amounts of pixel data that might be printed to the output. Please note that in this context element values with a VR of OD, OF, OL and OV are not regarded as 'binary data'. Multiple values (i.e. where the DICOM value multiplicity is greater than 1) are separated by a backslash '\' (except for Base64 encoded data). The 'len' attribute indicates the number of bytes for the particular value field as stored in the DICOM data set, i.e. it might deviate from the XML encoded value length e.g. because of non-significant padding that has been removed. If this attribute is missing in 'sequence' or 'item' start tags, the corresponding DICOM element has been stored with undefined length. Native DICOM Model Format The description of the Native DICOM Model format can be found in the DICOM standard, part 19 ('Application Hosting'). Bulk Data Binary data, i.e. DICOM element values with Value Representations (VR) of OB or OW, as well as OD, OF, OL, OV and UN values are by default not writ- ten to the XML output because of their size. Instead, for each element, a new Universally Unique Identifier (UUID) is being generated and written as an attribute of a <BulkData> XML element. So far, there is no possibility to write an additional file to hold the binary data for each of the binary data chunks. This is not required by the standard, however, it might be useful for implementing an Application Hosting interface; thus this feature may be available in future versions of dcm2xml. In addition, Supplement 163 (Store Over the Web by Representational State Transfer Services) introduces a new <InlineBinary> XML element that allows for encoding binary data as Base64. Currently, the command line option --encode-base64 enables this encoding for the following VRs: OB, OD, OF, OL, OV, OW and UN. Known Issues In addition to what is written in the above section on 'Bulk Data', there are further known issues with the current implementation of the Native DI- COM Model format. For example, large element values with a VR other than OB, OD, OF, OL, OV, OW or UN are currently never written as bulk data, al- though it might be useful, e.g. for very long text elements (especially UT) or very long numeric fields (of various VRs). NOTES Character Encoding The XML character encoding is determined automatically from the DICOM at- tribute (0008,0005) 'Specific Character Set' using the following mapping: ASCII (ISO_IR 6) => "UTF-8" UTF-8 "ISO_IR 192" => "UTF-8" ISO Latin 1 "ISO_IR 100" => "ISO-8859-1" ISO Latin 2 "ISO_IR 101" => "ISO-8859-2" ISO Latin 3 "ISO_IR 109" => "ISO-8859-3" ISO Latin 4 "ISO_IR 110" => "ISO-8859-4" ISO Latin 5 "ISO_IR 148" => "ISO-8859-9" ISO Latin 9 "ISO_IR 203" => "ISO-8859-15" Cyrillic "ISO_IR 144" => "ISO-8859-5" Arabic "ISO_IR 127" => "ISO-8859-6" Greek "ISO_IR 126" => "ISO-8859-7" Hebrew "ISO_IR 138" => "ISO-8859-8" If this DICOM attribute is missing in the input file, although needed, op- tion --charset-assume can be used to specify an appropriate character set manually (using one of the DICOM defined terms). For reasons of backward compatibility with previous versions of this tool, the following terms are also supported and mapped automatically to the associated DICOM defined terms: latin-1, latin-2, latin-3, latin-4, latin-5, latin-9, cyrillic, ara- bic, greek, hebrew. Multiple character sets using code extension techniques are not supported. If needed, option --convert-to-utf8 can be used to convert the DICOM file or data set to UTF-8 encoding prior to the conversion to XML format. This is also useful for DICOMDIR files where each directory record can have a different character set. If no mapping is defined and option --convert-to-utf8 is not used, non- ASCII characters and those below #32 are stored as '&#nnn;' where 'nnn' refers to the numeric character code. This might lead to invalid character entity references (such as '' for ESC) and will cause most XML parsers to reject the document. LOGGING The level of logging output of the various command line tools and underly- ing libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option --verbose also informational messages like processing details are reported. Option --debug can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option --log-level. In --quiet mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more de- tails on the different logging levels, see documentation of module 'oflog'. In case the logging output should be written to file (optionally with log- file rotation), to syslog (Unix) or the event log (Windows) option --log- config can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in <etcdir>/logger.cfg. COMMAND LINE All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n val- ues. Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mu- tually exclusive the rightmost appearance is used. This behavior conforms to the standard evaluation rules of common Unix shells. In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple white- spaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a com- mand file cannot contain another command file. This simple but effective approach allows one to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file <datadir>/dumppat.txt). ENVIRONMENT The dcm2xml utility will attempt to load DICOM data dictionaries specified in the DCMDICTPATH environment variable. By default, i.e. if the DCMDICT- PATH environment variable is not set, the file <datadir>/dicom.dic will be loaded unless the dictionary is built into the application (default for Windows). The default behavior should be preferred and the DCMDICTPATH environment variable only used when alternative data dictionaries are required. The DCMDICTPATH environment variable has the same format as the Unix shell PATH variable in that a colon (':') separates entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary code will at- tempt to load each file specified in the DCMDICTPATH environment variable. It is an error if no data dictionary can be loaded. Depending on the command line options specified, the dcm2xml utility will attempt to load character set mapping tables. This happens when DCMTK was compiled with the oficonv library (which is the default) and the mapping tables are not built into the library (default when DCMTK uses shared li- braries). The mapping table files are expected in DCMTK's <datadir>. The DCMICONVPATH environment variable can be used to specify a different location. If a dif- ferent location is specified, those mapping tables also replace any built- in tables. FILES <datadir>/dcm2xml.dtd - Document Type Definition (DTD) file SEE ALSO xml2dcm(1), dcmconv(1) COPYRIGHT Copyright (C) 2002-2025 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Ger- many. Version 3.7.0 Mon Dec 15 2025 dcm2xml(1)
NAME | SYNOPSIS | DESCRIPTION | PARAMETERS | OPTIONS | DCMTK Format | Native DICOM Model Format | NOTES | LOGGING | COMMAND LINE | ENVIRONMENT | FILES | SEE ALSO | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dcm2xml&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>