dpkg-deb(1) dpkg suite dpkg-deb(1) NAME dpkg-deb - Debian package archive (.deb) manipulation tool SYNOPSIS dpkg-deb [option...] command DESCRIPTION dpkg-deb packs, unpacks and provides information about Debian archives. Use dpkg to install and remove packages from your system. You can also invoke dpkg-deb by calling dpkg with whatever options you want to pass to dpkg-deb. dpkg will spot that you wanted dpkg-deb and run it for you. For most commands taking an input archive argument, the archive can be read from standard input if the archive name is given as a single minus charac- ter (<<->>); otherwise lack of support will be documented in their respec- tive command description. COMMANDS -b, --build binary-directory [archive|directory] Creates a debian archive from the filesystem tree stored in binary- directory. binary-directory must have a DEBIAN subdirectory, which contains the control information files such as the control file it- self. This directory will not appear in the binary package's filesystem archive, but instead the files in it will be put in the binary package's control information area. Unless you specify --nocheck, dpkg-deb will read DEBIAN/control and parse it. It will check the file for syntax errors and other prob- lems, and display the name of the binary package being built. dpkg-deb will also check the permissions of the maintainer scripts and other files found in the DEBIAN control information directory. If no archive is specified then dpkg-deb will write the package into the file binary-directory.deb. If the archive to be created already exists it will be overwritten. If the second argument is a directory then dpkg-deb will write to the file directory/package_version_arch.deb. When a target direc- tory is specified, rather than a file, the --nocheck option may not be used (since dpkg-deb needs to read and parse the package control file to determine which filename to use). -I, --info archive [control-file-name...] Provides information about a binary package archive. If no control-file-names are specified then it will print a summary of the contents of the package as well as its control file. If any control-file-names are specified then dpkg-deb will print them in the order they were specified; if any of the components weren't present it will print an error message to stderr about each one and exit with status 2. -W, --show archive Provides information about a binary package archive in the format specified by the --showformat argument. The default format displays the package's name and version on one line, separated by a tabula- tor. -f, --field archive [control-field-name...] Extracts control file information from a binary package archive. If no control-field-names are specified then it will print the whole control file. If any are specified then dpkg-deb will print their contents, in the order in which they appear in the control file. If more than one control-field-name is specified then dpkg-deb will precede each with its field name (and a colon and space). No errors are reported for fields requested but not found. -c, --contents archive Lists the contents of the filesystem tree archive portion of the package archive. It is currently produced in the format generated by tar's verbose listing. -x, --extract archive directory Extracts the filesystem tree from a package archive into the speci- fied directory. Note that extracting a package to the root directory will not result in a correct installation! Use dpkg to install packages. directory (but not its parents) will be created if necessary, and its permissions modified to match the contents of the package. -X, --vextract archive directory Is like --extract (-x) with --verbose (-v) which prints a listing of the files extracted as it goes. -R, --raw-extract archive directory Extracts the filesystem tree from a package archive into a specified directory, and the control information files into a DEBIAN subdirec- tory of the specified directory (since dpkg 1.16.1). The target directory (but not its parents) will be created if neces- sary. The input archive is not (currently) processed sequentially, so reading it from standard input (<<->>) is not supported. --ctrl-tarfile archive Extracts the control data from a binary package and sends it to standard output in tar format (since dpkg 1.17.14). Together with tar(1) this can be used to extract a particular control file from a package archive. The input archive will always be processed sequen- tially. --fsys-tarfile archive Extracts the filesystem tree data from a binary package and sends it to standard output in tar format. Together with tar(1) this can be used to extract a particular file from a package archive. The input archive will always be processed sequentially. -e, --control archive [directory] Extracts the control information files from a package archive into the specified directory. If no directory is specified then a subdirectory DEBIAN in the cur- rent directory is used. The target directory (but not its parents) will be created if neces- sary. -?, --help Show the usage message and exit. --version Show the version and exit. OPTIONS --showformat=format This option is used to specify the format of the output --show will produce. The format is a string that will be output for each package listed. The string may reference any status field using the "${field-name}" form, a list of the valid fields can be easily produced using -I on the same package. A complete explanation of the formatting options (including escape sequences and field tabbing) can be found in the explanation of the --showformat option in dpkg-query(1). The default for this field is "${Package}\t${Version}\n". -zcompress-level Specify which compression level to use on the compressor backend, when building a package (default is 9 for gzip, 6 for xz). The ac- cepted values are 0-9 with: 0 being mapped to compressor none for gzip. Before dpkg 1.16.2 level 0 was equivalent to compressor none for all compressors. -Scompress-strategy Specify which compression strategy to use on the compressor backend, when building a package (since dpkg 1.16.2). Allowed values are none (since dpkg 1.16.4), filtered, huffman, rle and fixed for gzip (since dpkg 1.17.0) and extreme for xz. -Zcompress-type Specify which compression type to use when building a package. Al- lowed values are gzip, xz (since dpkg 1.15.6), and none (default is xz). --[no-]uniform-compression Specify that the same compression parameters should be used for all archive members (i.e. control.tar and data.tar; since dpkg 1.17.6). Otherwise only the data.tar member will use those parameters. The only supported compression types allowed to be uniformly used are none, gzip and xz. The --no-uniform-compression option disables uniform compression (since dpkg 1.19.0). Uniform compression is the default (since dpkg 1.19.0). --root-owner-group Set the owner and group for each entry in the filesystem tree data to root with id 0 (since dpkg 1.19.0). Note: This option can be useful for rootless builds (see root- less-builds.txt), but should not be used when the entries have an owner or group that is not root. Support for these will be added later in the form of a meta manifest. --deb-format=format Set the archive format version used when building (since dpkg 1.17.0). Allowed values are 2.0 for the new format, and 0.939000 for the old one (default is 2.0). The old archive format is less easily parsed by non-Debian tools and is now obsolete; its only use is when building packages to be parsed by versions of dpkg older than 0.93.76 (September 1995), which was released as i386 a.out only. --nocheck Inhibits dpkg-deb --build's usual checks on the proposed contents of an archive. You can build any archive you want, no matter how bro- ken, this way. -v, --verbose Enables verbose output (since dpkg 1.16.1). This currently only af- fects --extract making it behave like --vextract. -D, --debug Enables debugging output. This is not very interesting. EXIT STATUS 0 The requested action was successfully performed. 2 Fatal or unrecoverable error due to invalid command-line usage, or interactions with the system, such as accesses to the database, mem- ory allocations, etc. ENVIRONMENT DPKG_COLORS Sets the color mode (since dpkg 1.18.5). The currently accepted values are: auto (default), always and never. TMPDIR If set, dpkg-deb will use it as the directory in which to create temporary files and directories. SOURCE_DATE_EPOCH If set, it will be used as the timestamp (as seconds since the epoch) in the deb(5)'s ar(5) container and used to clamp the mtime in the tar(5) file entries. NOTES Do not attempt to use just dpkg-deb to install software! You must use dpkg proper to ensure that all the files are correctly placed and the package's scripts run and its status and contents recorded. BUGS dpkg-deb -I package1.deb package2.deb does the wrong thing. There is no authentication on .deb files; in fact, there isn't even a straightforward checksum. (Higher level tools like APT support authenti- cating .deb packages retrieved from a given repository, and most packages nowadays provide an md5sum control file generated by debian/rules. Though this is not directly supported by the lower level tools.) SEE ALSO deb(5), deb-control(5), dpkg(1), dselect(1). 1.19.8 2022-05-24 dpkg-deb(1)
NAME | SYNOPSIS | DESCRIPTION | COMMANDS | OPTIONS | EXIT STATUS | ENVIRONMENT | NOTES | BUGS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dpkg-deb&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>