Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
FENCE_AGENT(8)		     System Manager's Manual		  FENCE_AGENT(8)

NAME
     fence_rcd_serial - rcd_serial fence agent

DESCRIPTION
     fence_rcd_serial  operates a serial cable that toggles a reset of an oppos-
     ing server using the reset switch on its motherboard. The cable  itself  is
     simple  with  no power, network or moving parts. An example of the cable is
     available here: https://smcleod.net/rcd-stonith/ and the circuit design  is
     available in the fence-agents src as SVG

     fence_rcd_serial accepts options on the command line as well as from stdin.
     Fenced   sends   parameters   through   stdin  when  it  execs  the  agent.
     fence_rcd_serial can be run by itself with command line options.	This  is
     useful for testing and for turning outlets on or off from scripts.

     Vendor URL: https://github.com/sammcj/fence_rcd_serial

PARAMETERS

     -o, --action=[action]
	    Fencing action (Default Value: reboot)

     -m, --method=[method]
	    Method to fence (onoff|cycle) (Default Value: cycle)

     --serial-port=[port]
	    Port of the serial device (Default Value: /dev/ttyS0)

     -q, --quiet
	    Disable logging to stderr. Does not affect --verbose or --debug-file
	    or logging to syslog.

     -v, --verbose
	    Verbose  mode.  Multiple -v flags can be stacked on the command line
	    (e.g., -vvv) to increase verbosity.

     --verbose-level
	    Level of debugging detail in  output.  Defaults  to  the  number  of
	    --verbose  flags specified on the command line, or to 1 if verbose=1
	    in a stonith device configuration (i.e., on stdin).

     -D, --debug-file=[debugfile]
	    Write debug information to given file

     -V, --version
	    Display version information and exit

     -h, --help
	    Display help and exit

     --plug-separator=[char]
	    Separator for plug parameter when specifying more than 1  plug  (De-
	    fault Value: ,)

     --delay=[seconds]
	    Wait X seconds before fencing is started (Default Value: 0)

     --disable-timeout=[true/false]
	    Disable  timeout (true/false) (default: true when run from Pacemaker
	    2.0+)

     --login-timeout=[seconds]
	    Wait X seconds for cmd prompt after login (Default Value: 5)

     --power-timeout=[seconds]
	    Test X seconds for status change after ON/OFF  (Default  Value:  20)

     --power-wait=[seconds]
	    Wait X seconds after issuing ON/OFF (Default Value: 2)

     --shell-timeout=[seconds]
	    Wait  X seconds for cmd prompt after issuing command (Default Value:
	    3)

     --stonith-status-sleep=[seconds]
	    Sleep X seconds between status calls during a  STONITH  action  (De-
	    fault Value: 1)

     --retry-on=[attempts]
	    Count of attempts to retry power on (Default Value: 1)

ACTIONS

     reboot
	    Reboot machine.

     monitor
	    Check the health of fence device

     metadata
	    Display the XML metadata describing this resource.

     manpage
	     The operational behavior of this is not known.

     validate-all
	    Validate if all required parameters are entered.

STDIN PARAMETERS

     action
	    Fencing action (Default Value: reboot)

     method
	    Method to fence (onoff|cycle) (Default Value: cycle)

     serial_port
	    Port of the serial device (Default Value: /dev/ttyS0)

     quiet  Disable logging to stderr. Does not affect --verbose or --debug-file
	    or logging to syslog.

     verbose
	    Verbose  mode.  Multiple -v flags can be stacked on the command line
	    (e.g., -vvv) to increase verbosity.

     verbose_level
	    Level of debugging detail in  output.  Defaults  to  the  number  of
	    --verbose  flags specified on the command line, or to 1 if verbose=1
	    in a stonith device configuration (i.e., on stdin).

     debug_file
	    Write debug information to given file Obsoletes: debug

     version
	    Display version information and exit

     help   Display help and exit

     plug_separator
	    Separator for plug parameter when specifying more than 1  plug  (De-
	    fault Value: ,)

     delay  Wait X seconds before fencing is started (Default Value: 0)

     disable_timeout
	    Disable  timeout (true/false) (default: true when run from Pacemaker
	    2.0+)

     login_timeout
	    Wait X seconds for cmd prompt after login (Default Value: 5)

     power_timeout
	    Test X seconds for status change after ON/OFF  (Default  Value:  20)

     power_wait
	    Wait X seconds after issuing ON/OFF (Default Value: 2)

     shell_timeout
	    Wait  X seconds for cmd prompt after issuing command (Default Value:
	    3)

     stonith_status_sleep
	    Sleep X seconds between status calls during a  STONITH  action  (De-
	    fault Value: 1)

     retry_on
	    Count of attempts to retry power on (Default Value: 1)

fence_rcd_serial (Fence Agent)	   2009-10-20			  FENCE_AGENT(8)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_rcd_serial&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>

home | help