FreeBSD Manual Pages
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME fence_rsa - Fence agent for IBM RSA DESCRIPTION fence_rsa is an I/O Fencing agent which can be used with the IBM RSA II management interface. It logs into an RSA II device via telnet and reboots the associated machine. Lengthy telnet connections to the RSA II device should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. fence_rsa accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_rsa can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.ibm.com PARAMETERS -o, --action=[action] Fencing action (Default Value: reboot) -c, --command-prompt=[prompt] Force Python regex for command prompt (Default Value: ['>']) -k, --identity-file=[filename] Identity file (private key) for SSH -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -a, --ip=[ip] IP address or hostname of fencing device -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 23) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[ip] IP address or hostname of fencing device (together with --port-as- ip) -x, --ssh Use SSH connection --ssh-options=[options] SSH options to use (Default Value: -F /dev/null) -l, --username=[name] Login name This parameter is always required. -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (De- fault Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 10) --port-as-ip Make "port/plug" to be an alias to IP address --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (De- fault Value: 1) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --ssh-path=[path] Path to ssh binary (Default Value: /usr/bin/ssh) --telnet-path=[path] Path to telnet binary (Default Value: /usr/bin/telnet) ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. STDIN PARAMETERS action Fencing action (Default Value: reboot) command_prompt Force Python regex for command prompt (Default Value: ['>']) Obso- letes: cmd_prompt identity_file Identity file (private key) for SSH inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only ip IP address or hostname of fencing device Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 23) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug IP address or hostname of fencing device (together with --port-as- ip) Obsoletes: port ssh Use SSH connection Obsoletes: secure ssh_options SSH options to use (Default Value: -F /dev/null) username Login name This parameter is always required. Obsoletes: login quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (De- fault Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) login_timeout Wait X seconds for cmd prompt after login (Default Value: 10) port_as_ip Make "port/plug" to be an alias to IP address power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (De- fault Value: 1) retry_on Count of attempts to retry power on (Default Value: 1) ssh_path Path to ssh binary (Default Value: /usr/bin/ssh) telnet_path Path to telnet binary (Default Value: /usr/bin/telnet) fence_rsa (Fence Agent) 2009-10-20 FENCE_AGENT(8)
NAME | DESCRIPTION | PARAMETERS | ACTIONS | STDIN PARAMETERS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_rsa&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>