FREEIPMI_INTERPRET_SEL(5) Configuration FREEIPMI_INTERPRET_SEL(5) NAME freeipmi_interpret_sel.conf - specify system event log (SEL) interpretation rules DESCRIPTION The /usr/local/etc/freeipmi/freeipmi_interpret_sel.conf defines how IPMI system event log entries should be interpreted. IPMI system events specify a number of states/thresholds when they are read. Based on those states/thresholds, libraries and tools such as libipmimonitoring(3) and ipmi-sel(8) can report if an event is "good" or "bad" via a report of a NOMINAL, WARNING, or CRITICAL state. A different state can be reported for an event depending on if it is asserted or deasserted. Each of the states listed below are (hopefully) descriptive enough to de- scribe the state conditions that may be set/unset for each sensor or event type. For more detailed information on each of the individual states listed below, please see the IPMI Specification "Sensor and Event Code Tables". Ipmi-sensors(8) can be used to determine the sensor types and the states/thresholds that exist on a system by outputting very verbose output and seeing what types of Assertion or Deassertion events are possible. Each of the events below may may take 1 or 2 of the following states as in- put. Nominal - Signal Nominal reading if event tripped Warning - Signal Warning reading if event tripped Critical - Signal Critical reading if event tripped If only one state is listed, that state will be interpreted when the event is asserted or deasserted. If two states are listed, the first state will be interpreted when an event is asserted, and the later will be interpreted when an event is deasserted. Not all IPMI sensor types and event types are currently supported. If you would like more to be supported, please e-mail the FreeIPMI mailing list. The default values selected for individual events being tripped are based on best guesses and motherboards being analyzed. If you think they should be changed, please e-mail the FreeIPMI mailing list to discuss what the de- faults should be. Most default interpretations can be determined quite easily and can meet the needs of most users. For example, a reading of "Performance_Met" is normally better than "Performance_Lags". However, some sensors can be am- biguous and depend completely on the manufacturer. For example, "State_As- serted" vs. "State_Deasserted" are completely at the interpretation of the vendor. Users are advised to adjust the interpretations below as needed for their machines. FORMAT The configuration options that can be specified in the configuration file are listed below. Each configuration option must be listed on a separate line. Arguments for an option are separated by any amount of whitespace. Multiple arguments are also separated by whitespace. Comments can be marked by using the pound sign ("#") character, and lines can be continued on the next using backslash ("\"). OPTIONS IPMI_Threshold_Sensor The following states correspond to threshold sensor events. This normally applies to events that dealing with non-discrete values, such as temperatures, voltages, RPM, etc. IPMI_Threshold_Sensor_Lower_Non_Critical_Going_Low Defaults to Warning/Nominal. IPMI_Threshold_Sensor_Lower_Non_Critical_Going_High Defaults to Nominal/Nominal. IPMI_Threshold_Sensor_Lower_Critical_Going_Low Defaults to Critical/Warning. IPMI_Threshold_Sensor_Lower_Critical_Going_High Defaults to Warning/Warning. IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_Low Defaults to Critical/Critical. IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_High Defaults to Critical/Critical. IPMI_Threshold_Sensor_Upper_Non_Critical_Going_Low Defaults to Nominal/Nominal. IPMI_Threshold_Sensor_Upper_Non_Critical_Going_High Defaults to Warning/Nominal. IPMI_Threshold_Sensor_Upper_Critical_Going_Low Defaults to Warning/Warning. IPMI_Threshold_Sensor_Upper_Critical_Going_High Defaults to Critical/Warning. IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_Low Defaults to Critical/Critical. IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_High Defaults to Critical/Critical. IPMI_Temperature_State The following states correspond to Temperature sensor events that report an assertion or deassertion. IPMI_Temperature_State_Deasserted Defaults to Nominal. IPMI_Temperature_State_Asserted Defaults to Warning. IPMI_Temperature_Limit The following states correspond to Temperature sensor events that report on limits. IPMI_Temperature_Limit_Not_Exceeded Defaults to Nominal. IPMI_Temperature_Limit_Exceeded Defaults to Critical. IPMI_Temperature_Transition_Severity The following states correspond to Temperature sensor events that report on transition severity. IPMI_Temperature_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Temperature_Transition_Severity_Transition_To_Non_Criti- cal_From_OK Defaults to Warning. IPMI_Temperature_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Temperature_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Temperature_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Temperature_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Temperature_Transition_Severity_Monitor Defaults to Warning. IPMI_Temperature_Transition_Severity_Informational Defaults to Nominal. IPMI_Voltage_State The following states correspond to Voltage sensor events that report an assertion or deassertion. IPMI_Voltage_State_Deasserted Defaults to Nominal. IPMI_Voltage_State_Asserted Defaults to Warning. IPMI_Voltage_Limit The following states correspond to Voltage sensor events that report on limits. IPMI_Voltage_Limit_Not_Exceeded Defaults to Nominal. IPMI_Voltage_Limit_Exceeded Defaults to Critical. IPMI_Voltage_Performance The following states correspond to Voltage sensor events that report on performance. IPMI_Voltage_Performance_Met Defaults to Nominal/Nominal. IPMI_Voltage_Performance_Lags Defaults to Critical/Warning. IPMI_Voltage_Transition_Severity The following states correspond to Voltage sensor events that report on device severity. IPMI_Voltage_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK Defaults to Warning. IPMI_Voltage_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Voltage_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Voltage_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Re- coverable Defaults to Critical. IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Voltage_Transition_Severity_Monitor Defaults to Warning. IPMI_Voltage_Transition_Severity_Informational Defaults to Nominal. IPMI_Current_Transition_Severity The following states correspond to Current sensor events that report on device severity. IPMI_Current_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK Defaults to Warning. IPMI_Current_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Current_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Current_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Re- coverable Defaults to Critical. IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Current_Transition_Severity_Monitor Defaults to Warning. IPMI_Current_Transition_Severity_Informational Defaults to Nominal. IPMI_Fan_State The following states correspond to Fan sensor events that report an assertion or deassertion. IPMI_Fan_State_Deasserted Defaults to Nominal. IPMI_Fan_State_Asserted Defaults to Warning. IPMI_Fan_Transition_Severity The following states correspond to Fan sensor events that report on device severity. IPMI_Fan_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK Defaults to Warning. IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe Defaults to Critical. IPMI_Fan_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Fan_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recov- erable Defaults to Critical. IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Fan_Transition_Severity_Monitor Defaults to Warning. IPMI_Fan_Transition_Severity_Informational Defaults to Nominal. IPMI_Fan_Device_Present The following states correspond to Fan sensor events that report on device installation. IPMI_Fan_Device_Present_Device_Removed_Device_Absent Defaults to Critical. IPMI_Fan_Device_Present_Device_Inserted_Device_Present Defaults to Nominal. IPMI_Fan_Transition_Availability The following states correspond to Fan sensor events that report on device availability. IPMI_Fan_Transition_Availability_To_Running Defaults to Nominal/Nominal. IPMI_Fan_Transition_Availability_To_In_Test Defaults to Warning/Warning. IPMI_Fan_Transition_Availability_To_Power_Off Defaults to Warning/Warning. IPMI_Fan_Transition_Availability_To_On_Line Defaults to Warning/Warning. IPMI_Fan_Transition_Availability_To_Off_Line Defaults to Warning/Warning. IPMI_Fan_Transition_Availability_To_Off_Duty Defaults to Warning/Warning. IPMI_Fan_Transition_Availability_To_Degraded Defaults to Critical/Warning. IPMI_Fan_Transition_Availability_To_Power_Save Defaults to Warning/Warning. IPMI_Fan_Transition_Availability_Install_Error Defaults to Critical/Critical. IPMI_Fan_Redundancy The following states correspond to Fan sensor events that report on redundancy. IPMI_Fan_Redundancy_Fully_Redundant Defaults to Nominal/Nominal. IPMI_Fan_Redundancy_Redundancy_Lost Defaults to Critical/Warning. IPMI_Fan_Redundancy_Redundancy_Degraded Defaults to Warning/Warning. IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redun- dant Defaults to Critical/Warning. IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insuffi- cient_Redundancy Defaults to Critical/Warning. IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources Defaults to Critical/Warning. IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant Defaults to Warning/Warning. IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant Defaults to Warning/Warning. IPMI_Physical_Security The following states correspond to Physical Security sensor events w/ Physical Security specific output events. IPMI_Physical_Security_General_Chassis_Intrusion Defaults to Critical. IPMI_Physical_Security_Drive_Bay_Intrusion Defaults to Critical. IPMI_Physical_Security_IO_Card_Intrusion Defaults to Critical. IPMI_Physical_Security_Processor_Area_Intrusion Defaults to Critical. IPMI_Physical_Security_LAN_Leash_Lost Defaults to Critical. IPMI_Physical_Security_Unauthorized_Dock_Undock Defaults to Critical. IPMI_Physical_Security_FAN_Area_Intrusion Defaults to Critical. IPMI_Platform_Security_Violation_Attempt The following states correspond to Platform Violation Attempt sensor events w/ Platform Security Violation Attempt specific output events. IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_At- tempt Defaults to Critical. IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Viola- tion_User_Password Defaults to Critical. IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Viola- tion_Attempt_Setup_Password Defaults to Critical. IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Viola- tion_Network_Boot_Password Defaults to Critical. IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Vi- olation Defaults to Critical. IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Pass- word_Violation Defaults to Critical. IPMI_Processor The following states correspond to Processor sensor events w/ Processor specific output events. IPMI_Processor_IERR Defaults to Critical. IPMI_Processor_Thermal_Trip Defaults to Critical. IPMI_Processor_FRB1_BIST_Failure Defaults to Critical. IPMI_Processor_FRB2_Hang_In_POST_Failure Defaults to Critical. IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure Defaults to Critical. IPMI_Processor_Configuration_Error Defaults to Critical. IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error Defaults to Critical. IPMI_Processor_Processor_Presence_Detected Defaults to Nominal. IPMI_Processor_Processor_Disabled Defaults to Critical. IPMI_Processor_Terminator_Presence_Detected Defaults to Critical. IPMI_Processor_Processor_Automatically_Throttled Defaults to Warning. IPMI_Processor_Machine_Check_Exception Defaults to Critical. IPMI_Processor_Correctable_Machine_Check_Error Defaults to Warning. IPMI_Processor_State The following states correspond to Processor sensor events that re- port an assertion or deassertion. IPMI_Processor_State_Deasserted Defaults to Nominal. IPMI_Processor_State_Asserted Defaults to Critical. IPMI_Power_Supply The following states correspond to Power Supply sensor events w/ Power Supply specific output events. IPMI_Power_Supply_Presence_Detected Defaults to Nominal/Nominal. IPMI_Power_Supply_Power_Supply_Failure_Detected Defaults to Critical/Critical. IPMI_Power_Supply_Predictive_Failure Defaults to Critical/Critical. IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC Defaults to Critical/Warning. IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range Defaults to Critical/Warning. IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present Defaults to Critical/Warning. IPMI_Power_Supply_Configuration_Error Defaults to Critical/Critical. IPMI_Power_Supply_Power_Supply_Inactive Defaults to Warning/Warning. IPMI_Power_Supply_State The following states correspond to Power_Supply sensor events that report an assertion or deassertion. IPMI_Power_Supply_State_Deasserted Defaults to Critical. IPMI_Power_Supply_State_Asserted Defaults to Nominal. IPMI_Power_Supply_Transition_Severity The following states correspond to Power Supply sensor events that report on device severity. IPMI_Power_Supply_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Criti- cal_From_OK Defaults to Warning. IPMI_Power_Supply_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Power_Supply_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Power_Supply_Transition_Severity_Monitor Defaults to Warning. IPMI_Power_Supply_Transition_Severity_Informational Defaults to Nominal. IPMI_Power_Supply_Redundancy The following states correspond to Power Supply sensor events that report on redundancy. IPMI_Power_Supply_Redundancy_Fully_Redundant Defaults to Nominal/Nominal. IPMI_Power_Supply_Redundancy_Redundancy_Lost Defaults to Critical/Warning. IPMI_Power_Supply_Redundancy_Redundancy_Degraded Defaults to Warning/Warning. IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Re- sources_From_Redundant Defaults to Critical/Warning. IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Re- sources_From_Insufficient_Redundancy Defaults to Critical/Warning. IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources Defaults to Critical/Warning. IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redun- dant Defaults to Warning/Warning. IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant Defaults to Warning/Warning. IPMI_Power_Unit The following states correspond to Power Unit sensor events w/ Power Unit specific output events. IPMI_Power_Unit_Power_Off_Power_Down Defaults to Nominal/Nominal. IPMI_Power_Unit_Power_Cycle Defaults to Nominal/Nominal. IPMI_Power_Unit_240VA_Power_Down Defaults to Warning/Nominal. IPMI_Power_Unit_Interlock_Power_Down Defaults to Warning/Warning. IPMI_Power_Unit_AC_Lost Defaults to Critical/Warning. IPMI_Power_Unit_Soft_Power_Control_Failure Defaults to Critical/Critical. IPMI_Power_Unit_Power_Unit_Failure_Detected Defaults to Critical/Critical. IPMI_Power_Unit_Predictive_Failure Defaults to Critical/Critical. IPMI_Power_Unit_Device_Present The following states correspond to Power Unit sensor events that re- port on device installation. IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent Defaults to Critical. IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present Defaults to Nominal. IPMI_Power_Unit_Redundancy The following states correspond to Power Unit sensor events that re- port on redundancy. IPMI_Power_Unit_Redundancy_Fully_Redundant Defaults to Nominal/Nominal. IPMI_Power_Unit_Redundancy_Redundancy_Lost Defaults to Critical/Warning. IPMI_Power_Unit_Redundancy_Redundancy_Degraded Defaults to Warning/Warning. IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Re- sources_From_Redundant Defaults to Critical/Warning. IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Re- sources_From_Insufficient_Redundancy Defaults to Critical/Warning. IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources Defaults to Critical/Warning. IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant Defaults to Warning/Warning. IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant Defaults to Warning/Warning. IPMI_Cooling_Device_Redundancy The following states correspond to Cooling Device sensor events that report on redundancy. IPMI_Cooling_Device_Redundancy_Fully_Redundant Defaults to Nominal/Nominal. IPMI_Cooling_Device_Redundancy_Redundancy_Lost Defaults to Critical/Warning. IPMI_Cooling_Device_Redundancy_Redundancy_Degraded Defaults to Warning/Warning. IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Re- sources_From_Redundant Defaults to Critical/Warning. IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Re- sources_From_Insufficient_Redundancy Defaults to Critical/Warning. IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources Defaults to Critical/Warning. IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redun- dant Defaults to Warning/Warning. IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redun- dant Defaults to Warning/Warning. IPMI_Memory The following states correspond to Memory sensor events w/ Memory specific output events. IPMI_Memory_Correctable_Memory_Error Defaults to Warning. IPMI_Memory_Uncorrectable_Memory_Error Defaults to Critical. IPMI_Memory_Parity Defaults to Critical. IPMI_Memory_Memory_Scrub_Failed Defaults to Critical. IPMI_Memory_Memory_Device_Disabled Defaults to Critical. IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached Defaults to Warning. IPMI_Memory_Presence_Detected Defaults to Nominal. IPMI_Memory_Configuration_Error Defaults to Critical. IPMI_Memory_Spare Defaults to Nominal. IPMI_Memory_Memory_Automatically_Throttled Defaults to Warning. IPMI_Memory_Critical_Overtemperature Defaults to Critical. IPMI_Memory_State The following states correspond to Memory sensor events that report an assertion or deassertion. IPMI_Memory_State_Deasserted Defaults to Nominal. IPMI_Memory_State_Asserted Defaults to Critical. IPMI_Memory_Transition_Severity The following states correspond to Memory sensor events that report on transition severity. IPMI_Memory_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_OK Defaults to Warning. IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Less_Se- vere Defaults to Critical. IPMI_Memory_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Memory_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Non_Re- coverable Defaults to Critical. IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Memory_Transition_Severity_Monitor Defaults to Warning. IPMI_Memory_Transition_Severity_Informational Defaults to Nominal. IPMI_Memory_Redundancy The following states correspond to Memory sensor events that report on redundancy. IPMI_Memory_Redundancy_Fully_Redundant Defaults to Nominal/Nominal. IPMI_Memory_Redundancy_Redundancy_Lost Defaults to Critical/Warning. IPMI_Memory_Redundancy_Redundancy_Degraded Defaults to Warning/Warning. IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Re- dundant Defaults to Critical/Warning. IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_In- sufficient_Redundancy Defaults to Critical/Warning. IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources Defaults to Critical/Warning. IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant Defaults to Warning/Warning. IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant Defaults to Warning/Warning. IPMI_Drive_Slot The following states correspond to Drive Slot sensor events w/ Drive Slot specific output events. IPMI_Drive_Slot_Drive_Presence Defaults to Nominal. IPMI_Drive_Slot_Drive_Fault Defaults to Critical. IPMI_Drive_Slot_Predictive_Failure Defaults to Critical. IPMI_Drive_Slot_Hot_Spare Defaults to Nominal. IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress Defaults to Nominal. IPMI_Drive_Slot_In_Critical_Array Defaults to Critical. IPMI_Drive_Slot_In_Failed_Array Defaults to Critical. IPMI_Drive_Slot_Rebuild_Remap_In_Progress Defaults to Nominal. IPMI_Drive_Slot_Rebuild_Remap_Aborted Defaults to Critical. IPMI_Drive_Slot_State The following states correspond to Drive Slot sensor events that re- port an assertion or deassertion. IPMI_Drive_Slot_State_Deasserted Defaults to Warning. IPMI_Drive_Slot_State_Asserted Defaults to Nominal. IPMI_Drive_Slot_Predictive_Failure The following states correspond to Drive_Slot sensor events that re- port a predictive failure assertion or deassertion. IPMI_Drive_Slot_Predictive_Failure_Deasserted Defaults to Nominal. IPMI_Drive_Slot_Predictive_Failure_Asserted Defaults to Critical. IPMI_Drive_Slot_Device_Present The following states correspond to Drive Slot sensor events that re- port on device installation. IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent Defaults to Critical. IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present Defaults to Nominal. IPMI_POST_Memory_Resize_State The following states correspond to POST Memory Resize sensor events that report an assertion or deassertion. IPMI_POST_Memory_Resize_State_Deasserted Defaults to Nominal. IPMI_POST_Memory_Resize_State_Asserted Defaults to Warning. IPMI_System_Firmware_Progress The following states correspond to System Firmware Progress sensor events w/ System Firmware Progress specific output events. IPMI_System_Firmware_Progress_System_Firmware_Error Defaults to Critical. IPMI_System_Firmware_Progress_System_Firmware_Hang Defaults to Critical. IPMI_System_Firmware_Progress_System_Firmware_Progress Defaults to Nominal. IPMI_System_Firmware_Progress_Transition_Severity The following states correspond to System Firmware Progress sensor events that report on device severity. IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_System_Firmware_Progress_Transition_Severity_Transi- tion_To_Non_Critical_From_OK Defaults to Warning. IPMI_System_Firmware_Progress_Transition_Severity_Transi- tion_To_Critical_From_Less_Severe Defaults to Critical. IPMI_System_Firmware_Progress_Transition_Severity_Transi- tion_To_Non_Recoverable_From_Less_Severe Defaults to Critical. IPMI_System_Firmware_Progress_Transition_Severity_Transi- tion_To_Non_Critical_From_More_Severe Defaults to Warning. IPMI_System_Firmware_Progress_Transition_Severity_Transi- tion_To_Critical_From_Non_Recoverable Defaults to Critical. IPMI_System_Firmware_Progress_Transition_Severity_Transi- tion_To_Non_Recoverable Defaults to Critical. IPMI_System_Firmware_Progress_Transition_Severity_Monitor Defaults to Warning. IPMI_System_Firmware_Progress_Transition_Severity_Informational Defaults to Nominal. IPMI_Event_Logging_Disabled The following states correspond to Event Logging Disabled sensor events w/ IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Dis- abled Defaults to Critical. IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled Defaults to Critical. IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared Defaults to Nominal. IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled Defaults to Critical. IPMI_Event_Logging_Disabled_SEL_Full Defaults to Critical. IPMI_Event_Logging_Disabled_SEL_Almost_Full Defaults to Warning. IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Log- ging_Disabled Defaults to Critical. IPMI_System_Event The following states correspond to System Event sensor events w/ System Event specific output events. IPMI_System_Event_System_Reconfigured Defaults to Warning. IPMI_System_Event_OEM_System_Boot_Event Defaults to Nominal. IPMI_System_Event_Undetermined_System_Hardware_Failure Defaults to Critical. IPMI_System_Event_Entry_Added_To_Auxiliary_Log Defaults to Nominal. IPMI_System_Event_PEF_Action Defaults to Nominal. IPMI_System_Event_Timestamp_Clock_Sync Defaults to Warning. IPMI_System_Event_Transition_State The following states correspond to System Event sensor events that report a transition state. IPMI_System_Event_Transition_State_Active Defaults to Nominal. IPMI_System_Event_Transition_State_Idle Defaults to Nominal. IPMI_System_Event_Transition_State_Busy Defaults to Nominal. IPMI_System_Event_State The following states correspond to System Event sensor events that report an assertion or deassertion. IPMI_System_Event_State_Deasserted Defaults to Nominal. IPMI_System_Event_State_Asserted Defaults to Warning. IPMI_Critical_Interrupt The following states correspond to Critical Interrupt sensor events w/ Critical Interrupt specific output events. IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt Defaults to Critical. IPMI_Critical_Interrupt_Bus_Timeout Defaults to Critical. IPMI_Critical_Interrupt_IO_Channel_Check_NMI Defaults to Critical. IPMI_Critical_Interrupt_Software_NMI Defaults to Warning. IPMI_Critical_Interrupt_PCI_PERR Defaults to Critical. IPMI_Critical_Interrupt_PCI_SERR Defaults to Critical. IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout Defaults to Critical. IPMI_Critical_Interrupt_Bus_Correctable_Error Defaults to Warning. IPMI_Critical_Interrupt_Bus_Uncorrectable_Error Defaults to Critical. IPMI_Critical_Interrupt_Fatal_NMI Defaults to Critical. IPMI_Critical_Interrupt_Bus_Fatal_Error Defaults to Critical. IPMI_Critical_Interrupt_Bus_Degraded Defaults to Warning. IPMI_Button_Switch The following states correspond to Button/Switch sensor events w/ Button/Switch specific output events. IPMI_Button_Switch_Power_Button_Pressed Defaults to Info. IPMI_Button_Switch_Sleep_Button_Pressed Defaults to Info. IPMI_Button_Switch_Reset_Button_Pressed Defaults to Info. IPMI_Button_Switch_FRU_Latch_Open Defaults to Warning. IPMI_Button_Switch_FRU_Service_Request_Button Defaults to Warning. IPMI_Button_Switch_State The following states correspond to Button/Switch sensor events that report an assertion or deassertion. IPMI_Button_Switch_State_Deasserted Defaults to Nominal. IPMI_Button_Switch_State_Asserted Defaults to Nominal. IPMI_Button_Switch_Transition_Severity The following states correspond to Button Switch sensor events that report on device severity. IPMI_Button_Switch_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Criti- cal_From_OK Defaults to Warning. IPMI_Button_Switch_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Button_Switch_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Button_Switch_Transition_Severity_Monitor Defaults to Warning. IPMI_Button_Switch_Transition_Severity_Informational Defaults to Nominal. IPMI_Module_Board_State The following states correspond to Module/Board sensor events that report an assertion or deassertion. IPMI_Module_Board_State_Deasserted Defaults to Nominal. IPMI_Module_Board_State_Asserted Defaults to Critical. IPMI_Module_Board_Device_Present The following states correspond to Module/Board sensor events that report on device installation. IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent Defaults to Critical. IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present Defaults to Nominal. IPMI_Chassis_Transition_Severity The following states correspond to Chassis sensor events that report on device severity. IPMI_Chassis_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_OK Defaults to Warning. IPMI_Chassis_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Chassis_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Chassis_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Non_Re- coverable Defaults to Critical. IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Chassis_Transition_Severity_Monitor Defaults to Warning. IPMI_Chassis_Transition_Severity_Informational Defaults to Nominal. IPMI_Chip_Set The following states correspond to Chip Set sensor events w/ Chip Set specific output events. IPMI_Chip_Set_Soft_Power_Control_Failure Defaults to Critical. IPMI_Chip_Set_Thermal_Trip Defaults to Critical. IPMI_Chip_Set_Transition_Severity The following states correspond to Chip Set sensor events that re- port on device severity. IPMI_Chip_Set_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK Defaults to Warning. IPMI_Chip_Set_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Chip_Set_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Chip_Set_Transition_Severity_Monitor Defaults to Warning. IPMI_Chip_Set_Transition_Severity_Informational Defaults to Nominal. IPMI_Cable_Interconnect The following states correspond to Cable/Interconnect sensor events w/ Cable/Interconnect specific output events. IPMI_Cable_Interconnect_Is_Connected Defaults to Nominal. IPMI_Cable_Interconnect_Configuration_Error Defaults to Critical. IPMI_Cable_Interconnect_Transition_Severity The following states correspond to Cable/Interconnect sensor events that report on device severity. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Criti- cal_From_OK Defaults to Warning. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recov- erable_From_Less_Severe Defaults to Critical. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recov- erable Defaults to Critical. IPMI_Cable_Interconnect_Transition_Severity_Monitor Defaults to Warning. IPMI_Cable_Interconnect_Transition_Severity_Informational Defaults to Nominal. IPMI_System_Boot_Initiated The following states correspond to System Boot Initiated sensor events w/ System Boot Initiated specific output events. IPMI_System_Boot_Initiated_Initiated_By_Power_Up Defaults to Nomi- nal. IPMI_System_Boot_Initiated_Initiated_By_Hard_Reset Defaults to Nominal. IPMI_System_Boot_Initiated_Initiated_By_Warm_Reset De- faults to Nominal. IPMI_System_Boot_Initiated_User_Re- quested_PXE_Boot Defaults to Nominal. IPMI_System_Boot_Initi- ated_Automatic_Boot_To_Diagnostic Defaults to Nominal. IPMI_Sys- tem_Boot_Initiated_OS_Run_Time_Software_Initiated_Hard_Reset De- faults to Warning. IPMI_System_Boot_Initiated_OS_Run_Time_Soft- ware_Initiated_Warm_Reset Defaults to Warning. IPMI_Sys- tem_Boot_Initiated_System_Restart Defaults to Nominal. IPMI_Boot_Error The following states correspond to Boot Error sensor events w/ Boot Error specific output events. IPMI_Boot_Error_No_Bootable_Media Defaults to Critical. IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive Defaults to Critical. IPMI_Boot_Error_PXE_Server_Not_Found Defaults to Critical. IPMI_Boot_Error_Invalid_Boot_Sector Defaults to Critical. IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source Defaults to Warning. IPMI_Boot_Error_State The following states correspond to Boot Error sensor events that re- port an assertion or deassertion. IPMI_Boot_Error_State_Deasserted Defaults to Nominal. IPMI_Boot_Error_State_Asserted Defaults to Critical. IPMI_Boot_Error_Transition_Severity The following states correspond to Boot Error sensor events that re- port on device severity. IPMI_Boot_Error_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Criti- cal_From_OK Defaults to Warning. IPMI_Boot_Error_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Boot_Error_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable Defaults to Critical. IPMI_Boot_Error_Transition_Severity_Monitor Defaults to Warning. IPMI_Boot_Error_Transition_Severity_Informational Defaults to Nominal. IPMI_OS_Boot The following states correspond to OS Boot sensor events w/ OS Boot specific output events. IPMI_OS_Boot_A_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_C_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_PXE_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_Diagnostic_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_CD_ROM_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_ROM_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified Defaults to Warning. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Started De- faults to Nominal. IPMI_OS_Boot_Base_OS_Hypervisor_Installa- tion_Completed Defaults to Nominal. IPMI_OS_Boot_Base_OS_Hypervi- sor_Installation_Aborted Defaults to Warning. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed Defaults to Critical. IPMI_OS_Critical_Stop The following states correspond to OS Critical Stop sensor events w/ OS Critical Stop specific output events. IPMI_OS_Critical_Stop_Critical_Stop_During_OS_Load Defaults to Crit- ical. IPMI_OS_Critical_Stop_Run_Time_Critical_Stop Defaults to Critical. IPMI_OS_Critical_Stop_OS_Graceful_Stop Defaults to Warn- ing. IPMI_OS_Critical_Stop_OS_Graceful_Shutdown Defaults to Warn- ing. IPMI_OS_Critical_Stop_Soft_Shutdown_Initiated_By_PEF Defaults to Warning. IPMI_OS_Critical_Stop_Agent_Not_Responding Defaults to Critical. IPMI_OS_Critical_Stop_State The following states correspond to OS Critical Stop sensor events that report an assertion or deassertion. IPMI_OS_Critical_Stop_State_Deasserted Defaults to Nominal. IPMI_OS_Critical_Stop_State_Asserted Defaults to Critical. IPMI_Slot_Connector The following states correspond to Slot Connector sensor events w/ Slot Connector specific output events. IPMI_Slot_Connector_Fault_Status_Asserted Defaults to Critical. IPMI_Slot_Connector_Identify_Status_Asserted Defaults to Warning. IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached Defaults to Nominal. IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation Defaults to Nominal. IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal Defaults to Nominal. IPMI_Slot_Connector_Slot_Power_Is_Off Defaults to Nominal. IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request Defaults to Warning. IPMI_Slot_Connector_Interlock_Asserted Defaults to Warning. IPMI_Slot_Connector_Slot_Is_Disabled Defaults to Warning. IPMI_Slot_Connector_Slot_Holds_Spare_Device Defaults to Nominal. IPMI_Slot_Connector_Transition_Severity The following states correspond to Slot Connector sensor events that report on device severity. IPMI_Slot_Connector_Transition_Severity_Transition_To_OK Defaults to Nominal. IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Criti- cal_From_OK Defaults to Warning. IPMI_Slot_Connector_Transition_Severity_Transition_To_Criti- cal_From_Less_Severe Defaults to Critical. IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recover- able_From_Less_Severe Defaults to Critical. IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Criti- cal_From_More_Severe Defaults to Warning. IPMI_Slot_Connector_Transition_Severity_Transition_To_Criti- cal_From_Non_Recoverable Defaults to Critical. IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recover- able Defaults to Critical. IPMI_Slot_Connector_Transition_Severity_Monitor Defaults to Warning. IPMI_Slot_Connector_Transition_Severity_Informational Defaults to Nominal. IPMI_System_ACPI_Power_State IPMI_System_ACPI_Power_State_S0_G0 Defaults to Nominal. IPMI_System_ACPI_Power_State_S1 Defaults to Nominal. IPMI_System_ACPI_Power_State_S2 Defaults to Nominal. IPMI_System_ACPI_Power_State_S3 Defaults to Nominal. IPMI_System_ACPI_Power_State_S4 Defaults to Nominal. IPMI_System_ACPI_Power_State_S5_G2 Defaults to Nominal. IPMI_System_ACPI_Power_State_S4_S5_Soft_Off Defaults to Nominal. IPMI_System_ACPI_Power_State_G3_Mechanical_Off Defaults to Nominal. IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States Defaults to Nominal. IPMI_System_ACPI_Power_State_G1_Sleeping Defaults to Nominal. IPMI_System_ACPI_Power_State_S5_Entered_By_Override Defaults to Nominal. IPMI_System_ACPI_Power_State_Legacy_ON_State Defaults to Nominal. IPMI_System_ACPI_Power_State_Legacy_OFF_State Defaults to Nominal. IPMI_System_ACPI_Power_State_Unspecified Defaults to Critical. IPMI_System_ACPI_Power_State_Unknown Defaults to Critical. IPMI_Watchdog2 The following states correspond to Watchdog 2 sensor events w/ Watchdog 2 specific output events. IPMI_Watchdog2_Timer_Expired Defaults to Warning. IPMI_Watchdog2_Hard_Reset Defaults to Critical. IPMI_Watchdog2_Power_Down Defaults to Critical. IPMI_Watchdog2_Power_Cycle Defaults to Critical. IPMI_Watchdog2_Reserved1 Defaults to Nominal. IPMI_Watchdog2_Reserved2 Defaults to Nominal. IPMI_Watchdog2_Reserved3 Defaults to Nominal. IPMI_Watchdog2_Reserved4 Defaults to Nominal. IPMI_Watchdog2_Timer_Interrupt Defaults to Warning. IPMI_Platform_Alert The following states correspond to Platform Alert sensor events w/ Platform Alert specific output events. IPMI_Platform_Alert_Platform_Generated_Page Defaults to Nominal. IPMI_Platform_Alert_Platform_Generated_LAN_Alert Defaults to Nomi- nal. IPMI_Platform_Alert_Platform_Event_Trap_Generated Defaults to Nominal. IPMI_Platform_Alert_Platform_Generated_SNMP_Trap Defaults to Nominal. IPMI_Platform_Alert_State The following states correspond to Platform Alert sensor events that report an assertion or deassertion. IPMI_Platform_Alert_State_Deasserted Defaults to Nominal. IPMI_Platform_Alert_State_Asserted Defaults to Critical. IPMI_Entity_Presence The following states correspond to Entity Presence sensor events w/ Entity Presence specific output events. IPMI_Entity_Presence_Entity_Present Defaults to Nominal. IPMI_Entity_Presence_Entity_Absent Defaults to Critical. IPMI_Entity_Presence_Entity_Disabled Defaults to Critical. IPMI_Entity_Presence_Device_Present The following states correspond to Entity Presence sensor events that report on device installation. IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent Defaults to Nominal. IPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present Defaults to Nominal. IPMI_LAN The following states correspond to LAN sensor events w/ LAN specific output events. IPMI_LAN_Heartbeat Defaults to Nominal. IPMI_LAN_Heartbeat_Lost De- faults to Warning. IPMI_Management_Subsystem_Health The following states correspond to Management Subsystem Health sen- sor events w/ Management Subsystem Health specific output events. IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavail- able Defaults to Critical. IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Un- available Defaults to Critical. IPMI_Management_Subsystem_Health_Management_Controller_Off_Line Defaults to Critical. IPMI_Management_Subsystem_Health_Management_Controller_Unavailable Defaults to Critical. IPMI_Management_Subsystem_Health_Sensor_Failure Defaults to Critical. IPMI_Management_Subsystem_Health_FRU_Failure Defaults to Critical. IPMI_Battery The following states correspond to Battery sensor events w/ Battery specific output events. IPMI_Battery_Battery_Low Defaults to Warning. IPMI_Battery_Battery_Failed Defaults to Critical. IPMI_Battery_Battery_Presence_Detected Defaults to Nominal. IPMI_Session_Audit The following states correspond to Session Audit sensor events w/ Session Audit specific output events. IPMI_Session_Audit_Session_Activated Defaults to Nominal. IPMI_Session_Audit_Session_Deactivated Defaults to Nominal. IIPMI_Session_Audit_Invalid_Username_Or_Password Defaults to Warning. IPMI_Session_Audit_Invalid_Password_Disable Defaults to Critical. IPMI_Version_Change_Transition_Severity The following states correspond to Version Change sensor events that Version Change specific output events. IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity Defaults to Warning. IPMI_Version_Change_Firmware_Or_Software_Change_Detected_With_Asso- ciated_Entity Defaults to Warning. IPMI_Version_Change_Hardware_Incompatability_Detected_With_Associ- ated_Entity Defaults to Critical. IPMI_Version_Change_Firmware_Or_Software_Incompatability_De- tected_With_Associated_Entity Defaults to Critical. IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hard- ware_Version Defaults to Critical. IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsup- ported_Firmware_Or_Software_Version Defaults to Critical. IPMI_Version_Change_Hardware_Change_Detected_With_Associated_En- tity_Was_Successful Defaults to Nominal. IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associ- ated_Entity_Was_Successful Defaults to Nominal. IPMI_FRU_State The following states correspond to FRU State sensor events w/ FRU State specific output events. IPMI_FRU_State_FRU_Not_Installed Defaults to Critical. IPMI_FRU_State_FRU_Inactive Defaults to Critical. IPMI_FRU_State_FRU_Activation_Requested Defaults to Warning. IPMI_FRU_State_FRU_Activation_In_Progress Defaults to Warning. IPMI_FRU_State_FRU_Active Defaults to Nominal. IPMI_FRU_State_FRU_Deactivation_Requested Defaults to Warning. IPMI_FRU_State_FRU_Deactivation_In_Progress Defaults to Warning. IPMI_FRU_State_FRU_Communication_Lost Defaults to Critical. IPMI_OEM The following configuration options can be used to configure OEM system event log events. Interpretations rules for a specific combi- nation of Manufacturer-ID, Product-ID, and Record-Type, are iterated through and the worst resulting sensor state is returned (i.e. Warn- ing < Nominal, Critical < Warning). If no match is found, no state is returned for the OEM event. For each of the configuration options below, <Manufacturer-ID> is the numeric IANA manufacturer ID for the manufacturer in question. The <Product-ID> is one or more numeric IDs representing the manu- facturer's product. The <Product-ID> can be listed as a single nu- meric number (e.g. 1234), a range of IDs separated by a dash (e.g. 12-20), or a list of specific product IDs separated by a plus (e.g. 12+19+22). Both the Manufacturer-ID and Product-ID can be found us- ing bmc-info(8). Multiple <Manufacturer-ID> and <Product-ID> pairs can be input separated by commas. IPMI_OEM_Sensor_System_Event_Record <Manufacturer-ID>:<Prod- uct-ID>,... Event-Reading-Type-Code Sensor-Type Event-Direction EventData1 EventData2 EventData3 State IPMI_OEM_System_Event_Record can be used to configure a state interpretation for a specific Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and Sensor-Type combination, and a specific Event-Direction, EventData1, EventData2, and Event- Data3. The Event-Direction field must specify Assertion, De- assertion, or ANY. Each of the EventData fields must specify a hex byte to match or the keyword ANY to match anything. The Event-Reading-Type-Code and Sensor-Type need not be OEM types. They may be non-OEM types and used to provide inter- pretation rules for sensors that may be behaving outside the standard of the IPMI specification. IPMI_OEM_Timestamped_Record <Manufacturer-ID>:<Product-ID>,... Record-Type OEMDATA1 OEMDATA2 OEMDATA3 OEMDATA4 OEMDATA5 OEMDATA6 State IPMI_OEM_Timestamped_Record can be used to configure an in- terpretation for a specific Manufacturer-ID, Product-ID, Record-Type, and OEM data combination. The Record-Type must be a legal record type for OEM Timestamped Records (currently 0xC0-0xDF). Each of the OEMDATA fields must specify a hex byte to match or the keyword ANY to match anything. IPMI_OEM_Non_Timestamped_Record <Manufacturer-ID>:<Product-ID>,... Record-Type OEMDATA1 OEMDATA2 OEMDATA3 OEMDATA4 OEMDATA5 OEMDATA6 OEMDATA7 OEMDATA8 OEMDATA9 OEMDATA10 OEMDATA11 OEMDATA12 OEMDATA13 State IPMI_OEM_Non_Timestamped_Record can be used to configure an interpretation for a specific Manufacturer-ID, Product-ID, Record-Type, and OEM data combination. The Record-Type must be a legal record type for OEM Non-Timestamped Records (cur- rently 0xEO-0xFF). Each of the OEMDATA fields must specify a hex byte to match or the keyword ANY to match anything. FILES /usr/local/etc/freeipmi/freeipmi_interpret_sel.conf REPORTING BUGS Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>. COPYRIGHT Copyright (C) 2007-2015 Lawrence Livermore National Security, LLC. This library is free software; you can redistribute it and/or modify it un- der the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. SEE ALSO libfreeipmi(3), libipmimonitoring(3), ipmi-sel(8) http://www.gnu.org/software/freeipmi/ FreeIPMI 1.6.18 2026-06-02 FREEIPMI_INTERPRET_SEL(5)
NAME | DESCRIPTION | FORMAT | OPTIONS | FILES | REPORTING BUGS | COPYRIGHT | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=freeipmi_interpret_sel.conf&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>