GDAL-RASTER-SCALE(1) GDAL GDAL-RASTER-SCALE(1) NAME gdal-raster-scale - Scale the values of the bands of a raster dataset Added in version 3.11. SYNOPSIS Usage: gdal raster scale [OPTIONS] <INPUT> <OUTPUT> Scale the values of the bands of a raster dataset. Positional arguments: -i, --input <INPUT> Input raster datasets [required] [not available in pipelines] -o, --output <OUTPUT> Output raster dataset [required] [not available in pipelines] Common Options: -h, --help Display help message and exit --json-usage Display usage as JSON document and exit --config <KEY>=<VALUE> Configuration option [may be repeated] -q, --quiet Quiet mode (no progress bar or warning message) [not available in pipelines] Options: -f, --of, --format, --output-format <OUTPUT-FORMAT> Output format ("GDALG" allowed) [not available in pipelines] --co, --creation-option <KEY>=<VALUE> Creation option [may be repeated] [not available in pipelines] --overwrite Whether overwriting existing output dataset is allowed [not available in pipelines] Mutually exclusive with --append --append Append as a subdataset to existing output [not available in pipelines] Mutually exclusive with --overwrite --ot, --datatype, --output-data-type <OUTPUT-DATA-TYPE> Output data type. OUTPUT-DATA-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64 -b, --band <BAND> Select band to restrict the scaling (1-based index) --input-min <INPUT-MIN> Minimum value of the source range Depends on --input-max --input-max <INPUT-MAX> Maximum value of the source range Depends on --input-min --output-min <OUTPUT-MIN> Minimum value of the destination range Depends on --output-max --output-max <OUTPUT-MAX> Maximum value of the destination range Depends on --output-min --exponent <EXPONENT> Exponent to apply non-linear scaling with a power function --no-clip Do not clip input values to [innput-min, input-max] Advanced Options: --if, --input-format <INPUT-FORMAT> Input formats [may be repeated] [not available in pipelines] --oo, --open-option <KEY>=<VALUE> Open options [may be repeated] [not available in pipelines] DESCRIPTION gdal raster scale can be used to rescale the input pixels values from the range --input-min to --input-max to the range --output-min to --output-max. It is also often necessary to reset the output datatype with the --ot switch. If omitted the output range is from the minimum value to the maxi- mum value allowed for integer data types (for example from 0 to 255 for Byte output) or from 0 to 1 for floating-point data types. If omitted the input range is automatically computed from the source dataset. This may be a slow operation on a large source dataset, and if using it multiple times for several gdal_translate invocation, it might be beneficial to call gdal raster edit --stats {source_dataset} priorly to precompute statistics, for formats that support serializing statistics computations (GeoTIFF, VRT...) Source values are clipped to the range defined by srcmin and srcmax, unless --no-clip is set. By default, the scaling is applied to all bands. It is possible to restrict it to a single band with --band and leave values of other bands unmodified. This command is the reverse operation of gdal raster unscale. This subcommand is also available as a potential step of gdal raster pipeline GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET) This program supports serializing the command line as a JSON file using the GDALG output format. The resulting file can then be opened as a raster dataset using the GDALG: GDAL Streamed Algorithm driver, and apply the specified pipeline in a on-the-fly / streamed way. PROGRAM-SPECIFIC OPTIONS -b, --band <BAND> Index (starting at 1) of the band to which the scaling must be only applied. --exponent <EXPONENT> Apply non-linear scaling with a power function. exp_val is the expo- nent of the power function (must be positive). This option must be used with the --input-min / --input-max / --output-min / --output-max options. The scaled value Dst is calculated from the source value Src with the following formula: {Dst} = \left( {Dst}_{max} - {Dst}_{min} \right) \times \operator- name{max} \left( 0, \operatorname{min} \left( 1, \left( \frac{{Src} - {Src}_{min}}{{Src}_{max}-{Src}_{min}} \right)^{exp\_val} \right) \right) + {Dst}_{min} NOTE: gdal raster unscale assumes linear scaling, and this cannot un- scale values back to the original ones. --input-max <MAX> Maximum value of the source range. If not specified, it will be cal- culated from the source dataset. This option must be used together with --input-min. --input-min <MIN> Minimum value of the source range. If not specified, it will be cal- culated from the input dataset. This option must be used together with --input-max. --output-max <MAX> Maximum value of the output range. This option must be used together with --output-min. --output-min <MIN> Minimum value of the output range. This option must be used together with --output-max. --no-clip Disable clipping input values to the source range. Note that using this option with non-linear scaling with a non-integer exponent will cause input values lower than the minimum value of the source range to be mapped to not-a-number. STANDARD OPTIONS --append Append input raster as a new subdataset to an existing output file. Only works with drivers that support adding subdatasets such as GTiff -- GeoTIFF File Format and GPKG -- GeoPackage raster This also creates the output dataset if it does not exist yet. --co, --creation-option <NAME>=<VALUE> Many formats have one or more optional creation options that can be used to control particulars about the file created. For instance, the GeoTIFF driver supports creation options to control compression, and whether the file should be tiled. May be repeated. The creation options available vary by format driver, and some sim- ple formats have no creation options at all. A list of options sup- ported for a format can be listed with the --formats command line option but the documentation for the format is the definitive source of information on driver creation options. See Raster drivers for- mat specific documentation for legal creation options for each for- mat. --if, --input-format <format> Format/driver name to be attempted to open the input file(s). It is generally not necessary to specify it, but it can be used to skip automatic driver detection, when it fails to select the appropriate driver. This option can be repeated several times to specify sev- eral candidate drivers. Note that it does not force those drivers to open the dataset. In particular, some drivers have requirements on file extensions. May be repeated. --oo, --open-option <NAME>=<VALUE> Dataset open option (format specific). May be repeated. -f, --of, --format, --output-format <OUTPUT-FORMAT> Which output raster format to use. Allowed values may be given by gdal --formats | grep raster | grep rw | sort --ot, --datatype, --output-data-type <OUTPUT-DATA-TYPE> Output data type among Byte, Int8, UInt16, Int16, UInt32, Int32, UInt64, Int64, CInt16, CInt32, Float32, Float64, CFloat32, CFloat64. --overwrite Allow program to overwrite existing target file or dataset. Other- wise, by default, gdal errors out if the target file or dataset al- ready exists. RETURN STATUS CODE The program returns status code 0 in case of success, and non-zero in case of error (non-blocking errors emitted as warnings are considered as a suc- cessful execution). EXAMPLES Example 1: Rescale linearly values of a UInt16 dataset from [0,4095] to a Byte dataset [0,255] $ gdal raster scale --datatype Byte --input-min 0 --input-max 4095 uint16.tif byte.tif --overwrite AUTHOR Even Rouault <even.rouault@spatialys.com> COPYRIGHT 1998-2026 Jun 05, 2026 GDAL-RASTER-SCALE(1)
NAME | SYNOPSIS | DESCRIPTION | GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET) | PROGRAM-SPECIFIC OPTIONS | STANDARD OPTIONS | RETURN STATUS CODE | EXAMPLES | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gdal-raster-scale&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>