FreeBSD Manual Pages
GDAL-VECTOR-GRID(1) GDAL GDAL-VECTOR-GRID(1) NAME gdal-vector-grid - Create a regular grid from scattered points Added in version 3.11. SYNOPSIS Usage: gdal vector grid <SUBCOMMAND> [OPTIONS] where <SUBCOMMAND> is one of: - average: Create a regular grid from scattered points using moving average interpolation. - average-distance: Create a regular grid from scattered points using the average distance between the grid node (center of the search ellipse) and all of the data points in the search ellipse. - average-distance-points: Create a regular grid from scattered points using the average distance between the data points in the search ellipse. - count: Create a regular grid from scattered points using the number of points in the search ellipse. - invdist: Create a regular grid from scattered points using weighted inverse distance interpolation. - invdistnn: Create a regular grid from scattered points using weighted inverse distance interpolation nearest neighbour. - linear: Create a regular grid from scattered points using linear/barycentric interpolation. - maximum: Create a regular grid from scattered points using the maximum value in the search ellipse. - minimum: Create a regular grid from scattered points using the minimum value in the search ellipse. - nearest: Create a regular grid from scattered points using nearest neighbor interpolation. - range: Create a regular grid from scattered points using the difference between the minimum and maximum values in the search ellipse. Common Options: -h, --help Display help message and exit --json-usage Display usage as JSON document and exit --config <KEY>=<VALUE> Configuration option [may be repeated] DESCRIPTION This program creates a regular grid (raster) from the scattered data read from a vector dataset. Input data will be interpolated to fill grid nodes with values, you can choose from various interpolation methods. It is possible to set the GDAL_NUM_THREADS configuration option to paral- lelize the processing. The value to specify is the number of worker threads, or ALL_CPUS to use all the cores/CPUs of the computer. OPTIONS COMMON TO ALL ALGORITHMS Standard options -f, --of, --format, --output-format <OUTPUT-FORMAT> Which output vector format to use. Allowed values may be given by gdal --formats | grep vector | grep rw | sort --co <NAME>=<VALUE> Many formats have one or more optional dataset creation options that can be used to control particulars about the file created. For in- stance, the GeoPackage driver supports creation options to control the version. May be repeated. The dataset creation options available vary by format driver, and some simple formats have no creation options at all. A list of op- tions supported for a format can be listed with the --formats com- mand line option but the documentation for the format is the defini- tive source of information on driver creation options. See Vector drivers format specific documentation for legal creation options for each format. Note that dataset creation options are different from layer creation options. --overwrite Allow program to overwrite existing target file or dataset. Other- wise, by default, gdal errors out if the target file or dataset al- ready exists. -l, --layer, --layer-name <LAYER-NAME> Indicates the layer(s) from the datasource that will be used for in- put features. May be specified multiple times --sql <SQL>|@<filename> An SQL statement to be evaluated against the datasource to produce a virtual layer of features to be burned in. The @filename syntax can be used to indicate that the content is in the pointed filename. --extent <xmin>,<ymin>,<xmax>,<ymax> Set georeferenced extents. The values must be expressed in georefer- enced units. If not specified, the extent of the output file will be the extent of the vector layers. --resolution <xres>,<yres> Set target resolution. The values must be expressed in georeferenced units. Both must be positive values. Note that --resolution cannot be used with --size. --size <xsize>,<ysize> Set output file size in pixels and lines. Note that --size cannot be used with --resolution. --ot, --datatype, --output-data-type <OUTPUT-DATA-TYPE> Force the output bands to be of the indicated data type. Defaults to Float64. --crs <CRS> Override the projection for the output file. If not specified, the projection of the input vector file will be used if available. When using this option, no reprojection of features from the CRS of the input vector to the specified CRS of the output raster, so use only this option to correct an invalid source CRS. The <CRS> may be any of the usual GDAL/OGR forms, complete WKT, PROJ.4, EPSG:n or a file containing the WKT. --bbox <xmin>,<ymin>,<xmax>,<ymax> Select only points contained within the specified bounding box. --zfield <field_name> Identifies an attribute field on the features to be used to get a Z value from. This value overrides the Z value read from the feature geometry record (naturally, if you have a Z value in the geometry, otherwise you have no choice and should specify a field name con- taining a Z value). --zincrease <increase_value> Addition to the attribute field on the features to be used to get a Z value from. The addition should be the same unit as the Z value. The result value will be Z value + Z increase value. The default value is 0. --zmultiply <multiply_value> This is multiplication ratio for the Z field. This can be used for a shift from e.g. feet to meters or from elevation to depth. The re- sult value will be (Z value + Z increase value) * Z multiply value. The default value is 1. Advanced options --oo <NAME>=<VALUE> Dataset open option (format specific). May be repeated. --if <format> Format/driver name to be attempted to open the input file(s). It is generally not necessary to specify it, but it can be used to skip automatic driver detection, when it fails to select the appropriate driver. This option can be repeated several times to specify sev- eral candidate drivers. Note that it does not force those drivers to open the dataset. In particular, some drivers have requirements on file extensions. May be repeated. INVDIST ALGORITHM Interpolation using an inverse distance to a power. When --min-points-per-quadrant or --max-points-per-quadrant is specified, the actual algorithm used is "invdistnn". Options --power <val> Weighting power (default 2.0). --smoothing <val> Smoothing parameter (default 0.0). --radius <val> Set first and second radius (mutually exclusive with --radius1 and --radius2. By default, uses the whole point array. --radius1 <val> The first radius (X axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --radius2 <val> The second radius (Y axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --angle <val> Angle of search ellipse rotation in degrees (counter clockwise, de- fault is 0). --max-points <val> Maximum number of data points to use. Do not search for more points than this number. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --min-points <val> Minimum number of data points to use. If less points in the search ellipse than the specified value are found, the grid node considered empty and will be filled with the nodata value. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --max-points-per-quadrant <val> Maximum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will only take into ac- count up to max_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being interpolated. --min-points-per-quadrant <val> Minimum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will collect at least min_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being in- terpolated. --nodata <val> Nodata value to fill empty points (default is 0). INVDISTNN ALGORITHM Interpolation using an inverse distance to a power with nearest neighbor searching, ideal when --max-points is used. When --min-points-per-quadrant or --max-points-per-quadrant is specified, the search will start with the closest point to the point being interpo- lated from the first quadrant, then the closest point to the point being interpolated from the second quadrant, etc. up to the 4th quadrant, and will continue with the next closest point in the first quadrant, etc. until --max-points and/or --max-points-per-quadrant thresholds are reached. Required option --radius <val> Set search radius (mutually exclusive with --radius1 and --radius2. Required. Options --power <val> Weighting power (default 2.0). --smoothing <val> Smoothing parameter (default 0.0). --max-points <val> Maximum number of data points to use. Do not search for more points than this number. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --min-points <val> Minimum number of data points to use. If less points in the search ellipse than the specified value are found, the grid node considered empty and will be filled with the nodata value. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --max-points-per-quadrant <val> Maximum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will only take into ac- count up to max_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being interpolated. --min-points-per-quadrant <val> Minimum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will collect at least min_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being in- terpolated. --nodata <val> Nodata value to fill empty points (default is 0). AVERAGE ALGORITHM Interpolation using a moving average algorithm. When --min-points-per-quadrant or --max-points-per-quadrant is specified, the search will start with the closest point to the point being interpo- lated from the first quadrant, then the closest point to the point being interpolated from the second quadrant, etc. up to the 4th quadrant, and will continue with the next closest point in the first quadrant, etc. until --max-points and/or --max-points-per-quadrant thresholds are reached. Options --radius <val> Set first and second radius (mutually exclusive with --radius1 and --radius2. By default, uses the whole point array. --radius1 <val> The first radius (X axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --radius2 <val> The second radius (Y axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --angle <val> Angle of search ellipse rotation in degrees (counter clockwise, de- fault is 0). --max-points <val> Maximum number of data points to use. Do not search for more points than this number. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --min-points <val> Minimum number of data points to use. If less points in the search ellipse than the specified value are found, the grid node considered empty and will be filled with the nodata value. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --max-points-per-quadrant <val> Maximum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will only take into ac- count up to max_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being interpolated. --min-points-per-quadrant <val> Minimum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will collect at least min_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being in- terpolated. --nodata <val> Nodata value to fill empty points (default is 0). NEAREST ALGORITHM Interpolation using nearest neighbor algorithm. Options --radius <val> Set first and second radius (mutually exclusive with --radius1 and --radius2. By default, uses the whole point array. --radius1 <val> The first radius (X axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --radius2 <val> The second radius (Y axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --angle <val> Angle of search ellipse rotation in degrees (counter clockwise, de- fault is 0). --nodata <val> Nodata value to fill empty points (default is 0). LINEAR ALGORITHM Linear interpolation by computing a Delaunay triangulation of the point cloud, finding in which triangle of the triangulation the point is, and by doing linear interpolation from its barycentric coordinates within the tri- angle. If the point is not in any triangle, depending on the radius, the algorithm will use the value of the nearest point or the nodata value. Options --radius <val> In case the point to be interpolated does not fit into a triangle of the Delaunay triangulation, use that maximum distance to search a nearest neighbour, or use nodata otherwise. If unset, the search distance is infinite. If set to 0, nodata value will be always used. --nodata <val> Nodata value to fill empty points (default is 0). DATA METRICS ALGORITHMS Besides the interpolation functionality gdal vector grid can be used to compute some data metrics using the specified window and output grid geome- try. These metrics are: * minimum: Minimum value found in grid node search ellipse. * maximum: Maximum value found in grid node search ellipse. * range: A difference between the minimum and maximum values found in grid node search ellipse. * count: A number of data points found in grid node search ellipse. * average-distance: An average distance between the grid node (center of the search ellipse) and all of the data points found in grid node search ellipse. * average-distance-points: An average distance between the data points found in grid node search ellipse. The distance between each pair of points within ellipse is calculated and average of all distances is set as a grid node value. All the metrics have the same set of options: --radius <val> Set first and second radius (mutually exclusive with --radius1 and --radius2. By default, uses the whole point array. --radius1 <val> The first radius (X axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --radius2 <val> The second radius (Y axis if rotation angle is 0) of the search el- lipse. By default, uses the whole point array. --angle <val> Angle of search ellipse rotation in degrees (counter clockwise, de- fault is 0). --min-points <val> Minimum number of data points to use. If less points in the search ellipse than the specified value are found, the grid node considered empty and will be filled with the nodata value. This may only used if the search ellipse is set (both radii are non-zero). By default, no limitation. --max-points-per-quadrant <val> Maximum number of data points to use per quadrant. By default, no limitation. When specified, the algorithm will only take into ac- count up to max_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point being interpolated. --min-points-per-quadrant <val> Minimum number of data points to use per quadrant. By default, no limitation. If that number is not reached, the point being interpo- lated will be set with the nodata value. When specified, the algo- rithm will collect at least min_points_per_quadrant points for each of the right-top, left-top, right-bottom and right-top quadrant rel- ative to the point being interpolated. --nodata <val> Nodata value to fill empty points (default is 0). When --min-points-per-quadrant or --max-points-per-quadrant is specified, the search will start with the closest point to the point being interpo- lated from the first quadrant, then the closest point to the point being interpolated from the second quadrant, etc. up to the 4th quadrant, and will continue with the next closest point in the first quadrant, etc. until --max-points and/or --max-points-per-quadrant thresholds are reached. READING COMMA SEPARATED VALUES Often you have a text file with a list of comma separated XYZ values to work with (so called CSV file). You can easily use that kind of data source in gdal vector grid. All you need is to create a virtual dataset header (VRT) for your CSV file and use it as an input datasource for gdal vector grid. You can find details on the VRT format on the VRT -- Virtual Format description page. Here is a small example. Let's say we have a CSV file called dem.csv con- taining Easting,Northing,Elevation 86943.4,891957,139.13 87124.3,892075,135.01 86962.4,892321,182.04 87077.6,891995,135.01 ... For the above data we will create a dem.vrt header with the following con- tent: <OGRVRTDataSource> <OGRVRTLayer name="dem"> <SrcDataSource>dem.csv</SrcDataSource> <GeometryType>wkbPoint</GeometryType> <GeometryField encoding="PointFromColumns" x="Easting" y="Northing" z="Elevation"/> </OGRVRTLayer> </OGRVRTDataSource> This description specifies so called 2.5D geometry with three coordinates X, Y and Z. The Z value will be used for interpolation. Now you can use dem.vrt with all OGR programs (start with ogrinfo to test that every- thing works fine). The datasource will contain a single layer called "dem" filled with point features constructed from values in the CSV file. Using this technique you can handle CSV files with more than three columns, switch columns, etc. OK, now the final step: gdal vector grid invdist dem.vrt demv.tif Or, if we do not wish to use a VRT file: gdal vector grid invdist -l dem -oo X_POSSIBLE_NAMES=Easting \ -oo Y_POSSIBLE_NAMES=Northing --zfield=Elevation dem.csv dem.tif If your CSV file does not contain column headers then it can be handled in the VRT file in the following way: <GeometryField encoding="PointFromColumns" x="field_1" y="field_2" z="field_3"/> The Comma Separated Value (.csv) description page contains details on CSV format supported by GDAL. EXAMPLES Example 1: Create a raster from a VRT datasource using inverse distance to a power gdal vector grid invdist --power=2.0 --smoothing=1.0 --extent=85000,894000,89000,890000 \ --size=400,400 -l dem dem.vrt dem.tif This example creates a raster TIFF file from the VRT datasource described in Reading comma separated values section using the inverse distance to a power method. Values to interpolate will be read from Z value of geometry record. Example 2: Read values to interpolate from an attribute field gdal vector grid invdist --zfield=Elevation --config GDAL_NUM_THREADS ALL_CPUS \ --power=2.0 --smoothing=1.0 --extent=85000,894000,89000,890000 \ --size=400,400 -l dem dem.vrt dem.tif This command does the same thing as the previous one, but reads values to interpolate from the attribute field specified with --zfield option instead of geometry record. So in this case X and Y coordinates are being taken from geometry and Z is being taken from the "Elevation" field. The GDAL_NUM_THREADS is also set to parallelize the computation. AUTHOR Even Rouault <even.rouault@spatialys.com> COPYRIGHT 1998-2025 Oct 29, 2025 GDAL-VECTOR-GRID(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS COMMON TO ALL ALGORITHMS | INVDIST ALGORITHM | INVDISTNN ALGORITHM | AVERAGE ALGORITHM | NEAREST ALGORITHM | LINEAR ALGORITHM | DATA METRICS ALGORITHMS | READING COMMA SEPARATED VALUES | EXAMPLES | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gdal-vector-grid&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>