FreeBSD Manual Pages
GIMP(1) GIMP Manual Pages GIMP(1) NAME gimp - an image manipulation and paint program. SYNOPSIS gimp [-h] [--help] [--help-all] [--help-gegl] [--help-gtk] [-v] [--ver- sion] [--license] [--verbose] [-n] [--new-instance] [-a] [--as-new] [-i] [--no-interface] [-d] [--no-data] [-f] [--no-fonts] [-s] [--no-splash] [--no-shm] [--no-cpu-accel] [--display display] [--ses- sion <name>] [-g] [--gimprc <gimprc>] [--system-gimprc <gimprc>] [--dump-gimprc] [--console-messages] [--debug-handlers] [--stack-trace-mode <mode>] [--pdb-compat-mode <mode>] [--batch-inter- preter <procedure>] [-b] [--batch <command>] [--quit] [--show-play- ground] [--show-debug-menu] [--g-fatal-warnings] [filename] ... gimp-console [-h] [--help] [--help-all] [--help-gegl] [--help-gtk] [-v] [--version] [--license] [--verbose] [-n] [--new-instance] [-a] [--as-new] [-d] [--no-data] [-f] [--no-fonts] [-s] [--no-splash] [--no-shm] [--no-cpu-accel] [--display display] [--session <name>] [-g] [--gimprc <gimprc>] [--system-gimprc <gimprc>] [--dump-gimprc] [--con- sole-messages] [--debug-handlers] [--stack-trace-mode <mode>] [--pdb-compat-mode <mode>] [--batch-interpreter <procedure>] [-b] [--batch <command>] [--quit] [--show-playground] [--show-debug-menu] [--g-fatal-warnings] [filename] ... DESCRIPTION GIMP is an acronym for GNU Image Manipulation Program. It is Community- driven Free Software for high-end image creation and manipulation. It is used to edit and manipulate images. It can load and save a vari- ety of image formats and can be used to convert between formats. GIMP can also be used as a paint program. It features a set of drawing and painting tools such as airbrush, clone, pencil, and paint brush. Painting and drawing tools can be applied to an image with a variety of paint modes. It also offers an extensive array of selection tools like rectangle, ellipse, fuzzy select, bezier select, intelligent scissors, and select by color. GIMP offers a variety of plug-ins that perform a variety of image ma- nipulations. Examples include bumpmap, edge detect, gaussian blur, and many others. In addition, GIMP has several scripting extensions which allow for advanced non-interactive processing and creation of images. GIMP ships with a second binary called gimp-console. This binary is a console-only version and behaves as if gimp was called with the --no-interface command-line option. On platforms with the D-Bus message bus system, GIMP will by default check if an instance is already running in this user session. If it de- tects that, it will pass all filenames given on the command-line to the already running GIMP instance and quit. OPTIONS GIMP accepts the following options: -h, --help Show GIMP command-line options. --help-all Show all command-line options. --help-gtk Show GTK command-line options. --help-gegl Show GEGL command-line options. -v, --version Output version information and exit. When combined with the --verbose option, version information about libraries used by GIMP is shown as well. --license Output license information and exit. --verbose Be verbose and create information on standard output. -n, --new-instance Do not attempt to reuse an already running GIMP instance. Al- ways start a new one. -a, --as-new Open filenames passed on the command-line as new images, don't set the filename on them. -i, --no-interface Run without a user interface. -d, --no-data Do not load patterns, gradients, palettes, or brushes. Often useful in non-interactive situations where startup time is to be minimized. -f, --no-fonts Do not load any fonts. No text functionality will be available if this option is used. -s, --no-splash Do not show the splash screen. --no-shm Do not use shared memory between GIMP and its plug-ins. In- stead of using shared memory, GIMP will send the data via pipe. This will result in slower performance than using shared mem- ory. --no-cpu-accel Do not use CPU accelerations such as MMX or SSE even if GIMP detects that your CPU provides this functionality. --session <name> Use a different sessionrc for this GIMP session. The given ses- sion name is appended to the default sessionrc filename. -g, --gimprc <gimprc> Use an alternative gimprc instead of the default one. Useful in cases where plug-in paths or machine specs may be different. --system-gimprc <gimprc> Use an alternate system gimprc file. --dump-gimprc Output a gimprc file with default settings. --debug-handlers Enable debugging signal handlers. -c, --console-messages Do not popup dialog boxes on errors or warnings. Print the mes- sages on the console instead. --stack-trace-mode {never|query|always} If a stack-trace should be generated in case of fatal signals. --pdb-compat-mode {off|on|warn} If the PDB should provide aliases for deprecated functions. --batch-interpreter <procedure> Specifies the procedure to use to process batch events. The de- fault is to let Script-Fu evaluate the commands. -b, --batch <command> Execute <command> non-interactively. This option may appear multiple times. The <command> is passed to the batch inter- preter. When <command> is - the commands are read from standard input. --quit Immediately quit GIMP after opening images and running batch commands. This is useful when you run GIMP non-interactively through command line to process images with --batch-interpreter and --batch. Unless your batch scripts contain any interactive logic allowing to communicate with them, you usually want the process to end when it's done. --display display Use the designated X display. --show-playground The Preferences dialog will now contain a "Playground" page where you can enable experimental features. These features should be used at your own risk since they are hidden for a reason. If you already enabled an experimental feature, this page will always be visible, even without the option. --show-debug-menu With this option, the "File" menu will contain a "Debug" sub- menu, containing a few debugging actions. This is usually only useful for developers. --g-fatal-warnings Make all warnings fatal. This is usually used for easier debug- ging in a debugger. Most people have no reasons to set this op- tion. ENVIRONMENT GIMP respects a number of environment variables. XDG_CONFIG_HOME as the base directory relative to which user-specific configu- ration files should be written, per the XDG Base Directory Specification. This is the preferred way to select a custom configuration di- rectory and the only one which will also ensure that configura- tion file formats are properly migrated across versions. DISPLAY to get the default host and display number. GIMP3_DIRECTORY to get the name of the personal GIMP directory. If unset $XDG_CONFIG_HOME/GIMP/3.2 is used. If this is an absolute path, it is used as is. If it is a relative path, it is taken to be a subdirectory of $XDG_CONFIG_HOME. This is a legacy environment variable, whose use is discour- aged. In particular, it will prevent GIMP to migrate configura- tion file formats across version updates. GIMP3_DATADIR to get the base location for data files such as brushes and patterns. If unset /usr/local/share/gimp/3.0 is used. GIMP3_LOCALEDIR to get the base location for translations. If unset /usr/lo- cal/share/locale is used. GIMP3_PLUGINDIR to get the base location for plug-ins and modules. If unset /usr/local/lib/gimp/3.0 is used. GIMP3_SYSCONFDIR to get the location of configuration files. If unset /usr/lo- cal/etc/gimp/3.0 is used. GIMP3_CACHEDIR to get the location for caches files. If unset the system de- fault for per-user cached files is used. GIMP3_TEMPDIR to get the location of temporary files. If unset the system de- fault for temporary files is used. On Linux GIMP can be compiled with support for binary relocati- bility. This will cause data, plug-ins and configuration files to be searched relative to the location of the gimp executable file unless overridden by the environment variables mentioned above. GIMP_DEBUG_FONTS to get a list of unsupported fonts printed on stderr when starting GIMP, with an information message explaining why, for each file. GIMP_BATCH_INTERPRETER to set the batch interpreter to be used. This is a legacy environment variable, whose use is discour- aged. We recommend using --batch-interpreter option instead for every batch call. FILES GIMP's data files are stored in /usr/local/share/gimp/3.0, where ${datarootdir} is set on install, but is typically /usr/share. GIMP's system-wide configuration files are stored in /usr/local/etc/gimp/3.0, where ${prefix} is typically /usr. Most GIMP configuration is read in from the user's init file, $XDG_CON- FIG_HOME/GIMP/3.2/gimprc. The system wide equivalent is in /usr/lo- cal/etc/gimp/3.0/gimprc. The system wide file is parsed first and the user gimprc can override the system settings. /usr/lo- cal/etc/gimp/3.0/gimprc_user is the default gimprc placed in users' home directories the first time GIMP is run. $XDG_CONFIG_HOME/GIMP/3.2/devicerc - holds settings for input devices together with the tool, colors, brush, pattern and gradient associated to that device. $XDG_CONFIG_HOME/GIMP/3.2/gtkrc - users set of GIMP-specific GTK config settings. Options such as widget color and fonts sizes can be set here. /usr/local/etc/gimp/3.0/gtkrc - system wide default set of GIMP-spe- cific GTK config settings. $XDG_CONFIG_HOME/GIMP/3.2/shortcutsrc - user's set of keybindings. $XDG_CONFIG_HOME/GIMP/3.2/parasiterc - Stores all persistent GIMP para- sites. This file will be rewritten every time you quit GIMP. $XDG_CONFIG_HOME/GIMP/3.2/sessionrc - This file takes session-specific info (that is info, you want to keep between two GIMP sessions). You are not supposed to edit it manually, but of course you can do. This file will be entirely rewritten every time you quit GIMP. If this file isn't found, defaults are used. $XDG_CONFIG_HOME/GIMP/3.2/templaterc - Image templates are kept in this file. New images can conveniently created from these templates. If this file isn't found, defaults are used. /usr/local/etc/gimp/3.0/unitrc - default user unit database. It con- tains the unit definitions for centimeters, meters, feet, yards, typo- graphic points and typographic picas and is placed in users home direc- tories the first time GIMP is ran. If this file isn't found, defaults are used. $XDG_CONFIG_HOME/GIMP/3.2/unitrc - This file contains your user unit database. You can modify this list with the unit editor. You are not supposed to edit it manually, but of course you can do. This file will be entirely rewritten every time you quit GIMP. $XDG_CONFIG_HOME/GIMP/3.2/plug-ins - location of user installed plug- ins. $XDG_CONFIG_HOME/GIMP/3.2/pluginrc - plug-in initialization values are stored here. This file is parsed on startup and regenerated if need be. $XDG_CONFIG_HOME/GIMP/3.2/modules - location of user installed modules. $XDG_CONFIG_HOME/GIMP/3.2/tmp - default location that GIMP uses as tem- porary space. /usr/local/share/gimp/3.0/brushes - system wide brush files. $XDG_CONFIG_HOME/GIMP/3.2/brushes - user created and installed brush files. These files are in the .gbr, .gih or .vbr file formats. $XDG_CONFIG_HOME/GIMP/3.2/curves - Curve profiles and presets as saved from the Curves tool. $XDG_CONFIG_HOME/GIMP/3.2/gimpressionist - Presets and user created brushes and papers are stored here. $XDG_CONFIG_HOME/GIMP/3.2/levels - Level profiles and presets as saved from the Levels tool. /usr/local/share/gimp/3.0/palettes - the system wide palette files. $XDG_CONFIG_HOME/GIMP/3.2/palettes - user created and modified palette files. This files are in the .gpl format. /usr/local/share/gimp/3.0/patterns - basic set of patterns for use in GIMP. $XDG_CONFIG_HOME/GIMP/3.2/patterns - user created and installed gimp pattern files. This files are in the .pat format. /usr/local/share/gimp/3.0/gradients - standard system wide set of gra- dient files. $XDG_CONFIG_HOME/GIMP/3.2/gradients - user created and installed gradi- ent files. /usr/local/share/gimp/3.0/scripts - system wide directory of scripts used in Script-Fu and other scripting extensions. $XDG_CONFIG_HOME/GIMP/3.2/scripts - user created and installed scripts. /usr/local/share/gimp/3.0/gflares - system wide directory used by the gflare plug-in. $XDG_CONFIG_HOME/GIMP/3.2/gflares - user created and installed gflare files. /usr/local/share/gimp/3.0/gfig - system wide directory used by the gfig plug-in. $XDG_CONFIG_HOME/GIMP/3.2/gfig - user created and installed gfig files. /usr/local/share/gimp/3.0/images/gimp-splash.png - the default image used for the GIMP splash screen. /usr/local/share/gimp/3.0/images/gimp-logo.png - image used in the GIMP about dialog. /usr/local/share/gimp/3.0/tips/gimp-tips.xml - tips as displayed in the "Tip of the Day" dialog box. SPLASH IMAGES GIMP comes with a default image for the splash screen but it allows system administrators and users to customize the splash screen by pro- viding other images. The image to be used with the splash screen is chosen as follows: 1. GIMP tries to load a random splash screen from the directory $XDG_CONFIG_HOME/GIMP/3.2/splashes. 2. It then falls back to using $XDG_CON- FIG_HOME/GIMP/3.2/gimp-splash.png. 3. If the user didn't install any custom splash images, a random image is picked from /usr/local/share/gimp/3.0/splashes. 4. As a last resort, GIMP uses the default splash image located at /usr/local/share/gimp/3.0/images/gimp-splash.png. SUGGESTIONS AND BUG REPORTS Any bugs found should be reported to the online bug-tracking system available on the web at https://gitlab.gnome.org/GNOME/gimp/issues. Be- fore reporting bugs, please check to see if the bug has already been reported. When reporting GIMP bugs, it is important to include a reliable way to reproduce the bug, version number of GIMP (and probably GTK), OS name and version, and any relevant hardware specs. If a bug is causing a crash, it is very useful if a stack trace can be provided. And of course, patches to rectify the bug are even better. OTHER INFO The canonical place to find GIMP info is at https://www.gimp.org/. Here you can find links to just about many other GIMP sites, tutorials, data sets, mailing list archives, and more. There is also a GIMP User Manual available at https://docs.gimp.org/ that goes into much more detail about the interactive use of GIMP. The latest versions of GIMP and our core libs are always available at https://download.gimp.org/. AUTHORS Spencer Kimball, Peter Mattis and the GIMP Development Team. With patches, fixes, plug-ins, extensions, scripts, translations, docu- mentation and more from lots and lots of people all over the world. SEE ALSO gimprc(5), gimptool(1), Version 3.2.0 March 23 2008 GIMP(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | FILES | SPLASH IMAGES | SUGGESTIONS AND BUG REPORTS | OTHER INFO | AUTHORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gimp&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>