rte_bbdev_op_ldpc_dec(3) DPDK rte_bbdev_op_ldpc_dec(3) NAME rte_bbdev_op_ldpc_dec SYNOPSIS #include <rte_bbdev_op.h> Data Fields struct rte_bbdev_op_data input struct rte_bbdev_op_data hard_output struct rte_bbdev_op_data soft_output struct rte_bbdev_op_data harq_combined_input struct rte_bbdev_op_data harq_combined_output uint32_t op_flags uint8_t rv_index uint8_t iter_max uint8_t iter_count uint8_t basegraph uint16_t z_c uint16_t n_cb uint8_t q_m uint16_t n_filler uint8_t code_block_mode uint16_t k0 struct rte_bbdev_op_dec_ldpc_cb_params cb_params struct rte_bbdev_op_dec_ldpc_tb_params tb_params Detailed Description Operation structure for LDPC decode. An operation can be performed on one CB at a time 'CB-mode'. An operation can also be performed on one or multiple CBs that logically belong to a TB 'TB-mode' (Currently not supported). The input encoded CB data is the Virtual Circular Buffer data stream. Each byte in the input circular buffer is the LLR value of each bit of the original CB. Hard output is a mandatory capability that all BBDEV PMDs support. This is the decoded CBs (CRC24A/B is the last 24-bit in each decoded CB). Soft output is an optional capability for BBDEV PMDs. If supported, an LLR rate matched output is computed in the soft_output buffer structure. These are A Posteriori Probabilities (APP) LLR samples for coded bits. HARQ combined output is an optional capability for BBDEV PMDs. If sup- ported, a LLR output is streamed to the harq_combined_output buffer. HARQ combined input is an optional capability for BBDEV PMDs. If supported, a LLR input is streamed from the harq_combined_input buffer. The output mbuf data structure is expected to be allocated by the applica- tion with enough room for the output data. Definition at line 506 of file rte_bbdev_op.h. Field Documentation struct rte_bbdev_op_data input The Virtual Circular Buffer for this code block, one LLR per bit of the original CB. Definition at line 510 of file rte_bbdev_op.h. struct rte_bbdev_op_data hard_output The hard decisions buffer for the decoded output, size K for each CB Definition at line 514 of file rte_bbdev_op.h. struct rte_bbdev_op_data soft_output The soft LLR output LLR stream buffer - optional Definition at line 516 of file rte_bbdev_op.h. struct rte_bbdev_op_data harq_combined_input The HARQ combined LLR stream input buffer - optional Definition at line 518 of file rte_bbdev_op.h. struct rte_bbdev_op_data harq_combined_output The HARQ combined LLR stream output buffer - optional Definition at line 520 of file rte_bbdev_op.h. uint32_t op_flags Flags from rte_bbdev_op_ldpcdec_flag_bitmasks Definition at line 523 of file rte_bbdev_op.h. uint8_t rv_index Rate matching redundancy version [3GPP TS38.212, section 5.4.2.1] Definition at line 528 of file rte_bbdev_op.h. uint8_t iter_max The maximum number of iterations to perform in decoding CB in this opera- tion - input Definition at line 532 of file rte_bbdev_op.h. uint8_t iter_count The number of iterations that were performed in decoding CB in this decode operation - output Definition at line 536 of file rte_bbdev_op.h. uint8_t basegraph 1: LDPC Base graph 1, 2: LDPC Base graph 2. [3GPP TS38.212, section 5.2.2] Definition at line 540 of file rte_bbdev_op.h. uint16_t z_c Zc, LDPC lifting size. [3GPP TS38.212, section 5.2.2] Definition at line 544 of file rte_bbdev_op.h. uint16_t n_cb Ncb, length of the circular buffer in bits. [3GPP TS38.212, section 5.4.2.1] Definition at line 548 of file rte_bbdev_op.h. uint8_t q_m Qm, modulation order {1,2,4,6,8}. [3GPP TS38.212, section 5.4.2.2] Definition at line 552 of file rte_bbdev_op.h. uint16_t n_filler Number of Filler bits, n_filler = K a Ka [3GPP TS38.212 section 5.2.2] Definition at line 556 of file rte_bbdev_op.h. uint8_t code_block_mode [0 - TB : 1 - CB] Definition at line 558 of file rte_bbdev_op.h. struct rte_bbdev_op_dec_ldpc_cb_params cb_params Struct which stores Code Block specific parameters Definition at line 561 of file rte_bbdev_op.h. struct rte_bbdev_op_dec_ldpc_tb_params tb_params Struct which stores Transport Block specific parameters Definition at line 563 of file rte_bbdev_op.h. uint16_t k0 Optional k0 Rate matching starting position, overrides rv_index when non null [3GPP TS38.212, section 5.4.2.1] Definition at line 568 of file rte_bbdev_op.h. Author Generated automatically by Doxygen for DPDK from the source code. Version 25.11.0 Thu Aug 27 2026 rte_bbdev_op_ldpc_dec(3)
NAME | SYNOPSIS | Detailed Description | Field Documentation | Author
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=harq_combined_output&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>