Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
LIEBERT-GXE(8)			   NUT Manual			  LIEBERT-GXE(8)

NAME
     liebert-gxe  -  Driver  for  Liebert GXE series UPS, using the YDN23 serial
     protocol

SYNOPSIS
     liebert-gxe -h

     liebert-gxe -a UPS_NAME [OPTIONS]

	 Note

	 This man page only documents  the  hardware-specific  features  of  the
	 liebert-gxe  driver. For information about the core driver, see nutups-
	 drv(8).

SUPPORTED HARDWARE
     Tested to work on the following units:

     *	 Liebert GXE 01k00TS1101C00

	     Note
	     This UPS has an RS-232 port and a USB port. The USB port has an ACM
	     interface which functions as a serial port for the  host  operating
	     system. Both ports can be used managing the device.

     This is an experimental driver. You have been warned.

EXTRA ARGUMENTS
     This driver supports the following optional settings in ups.conf(5):

     addr=num
	 Set the address of the UPS -- 01 (default) ~ 99.

     retry=num
	 Set the max times of read failures. (UPS sometimes ignores the incoming
	 command and causes driver stales. The driver will ignore retry failures
	 if occurred in a row. However, this does increase the latency if a real
	 stale happened. Default to 3)

AUTHORS
     *	 Gong Zhile <goodspeed at mailo.cat>

SEE ALSO
   The core driver:
     nutupsdrv(8)

   Internet resources:
     The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Network UPS Tools 2.8.5.	   08/04/2026			  LIEBERT-GXE(8)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=liebert-gxe&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>

home | help