FreeBSD Manual Pages
LLVM-OBJDUMP(1) LLVM LLVM-OBJDUMP(1) NAME llvm-objdump - LLVM's object file dumper SYNOPSIS llvm-objdump [commands] [options] [filenames...] DESCRIPTION The llvm-objdump utility prints the contents of object files and final linked images named on the command line. If no file name is specified, llvm-objdump will attempt to read from a.out. If - is used as a file name, llvm-objdump will process a file on its standard input stream. COMMANDS At least one of the following commands are required, and some commands can be combined with other commands: -a, --archive-headers Display the information contained within an archive's headers. -d, --disassemble Disassemble all text sections found in the input files. -D, --disassemble-all Disassemble all sections found in the input files. --disassemble-symbols=<symbol1[,symbol2,...]> Disassemble only the specified symbols. Takes demangled symbol names when --demangle is specified, otherwise takes mangled symbol names. Implies --disassemble. --dwarf=<value> Dump the specified DWARF debug sections. The supported values are: frames - .debug_frame -f, --file-headers Display the contents of the overall file header. --fault-map-section Display the content of the fault map section. -h, --headers, --section-headers Display summaries of the headers for each section. --help Display usage information and exit. Does not stack with other com- mands. -p, --private-headers Display format-specific file headers. -r, --reloc Display the relocation entries in the file. -R, --dynamic-reloc Display the dynamic relocation entries in the file. --raw-clang-ast Dump the raw binary contents of the clang AST section. -s, --full-contents Display the contents of each section. -t, --syms Display the symbol table. -T, --dynamic-syms Display the contents of the dynamic symbol table. -u, --unwind-info Display the unwind info of the input(s). -v, --version Display the version of the llvm-objdump executable. Does not stack with other commands. -x, --all-headers Display all available header information. Equivalent to specifying --archive-headers, --file-headers, --private-headers, --reloc, --section-headers, and --syms. OPTIONS llvm-objdump supports the following options: --adjust-vma=<offset> Increase the displayed address in disassembly or section header printing by the specified offset. --arch-name=<string> Specify the target architecture when disassembling. Use --version for a list of available targets. -C, --demangle Demangle symbol names in the output. --debug-vars=<format> Print the locations (in registers or memory) of source-level vari- ables alongside disassembly. format may be unicode or ascii, de- faulting to unicode if omitted. --debug-vars-indent=<width> Distance to indent the source-level variable display, relative to the start of the disassembly. Defaults to 52 characters. -j, --section=<section1[,section2,...]> Perform commands on the specified sections only. For Mach-O use seg- ment,section to specify the section name. -l, --line-numbers When disassembling, display source line numbers. Implies --disassemble. -M, --disassembler-options=<opt1[,opt2,...]> Pass target-specific disassembler options. Available options: * reg-names-std: ARM only (default). Print in ARM 's instruction set documentation, with r13/r14/r15 replaced by sp/lr/pc. * reg-names-raw: ARM only. Use r followed by the register number. * no-aliases: AArch64 and RISC-V only. Print raw instruction mnemonic instead of pesudo instruction mnemonic. * numeric: RISC-V only. Print raw register names instead of ABI mnemonic. (e.g. print x1 instead of ra) * att: x86 only (default). Print in the AT&T syntax. * intel: x86 only. Print in the intel syntax. --mcpu=<cpu-name> Target a specific CPU type for disassembly. Specify --mcpu=help to display available CPUs. --mattr=<a1,+a2,-a3,...> Enable/disable target-specific attributes. Specify --mattr=help to display the available attributes. --no-leading-addr When disassembling, do not print leading addresses. --no-print-imm-hex Do not use hex format for immediate values in disassembly output (default). --no-show-raw-insn When disassembling, do not print the raw bytes of each instruction. --prefix=<prefix> When disassembling with the --source option, prepend prefix to ab- solute paths. --prefix-strip=<level> When disassembling with the --source option, strip out level initial directories from absolute paths. This option has no effect without --prefix. --print-imm-hex Use hex format when printing immediate values in disassembly output. -S, --source When disassembling, display source interleaved with the disassembly. Implies --disassemble. --show-lma Display the LMA column when dumping ELF section headers. Defaults to off unless any section has different VMA and LMAs. --start-address=<address> When disassembling, only disassemble from the specified address. When printing relocations, only print the relocations patching off- sets from at least address. When printing symbols, only print symbols with a value of at least address. --stop-address=<address> When disassembling, only disassemble up to, but not including the specified address. When printing relocations, only print the relocations patching off- sets up to address. When printing symbols, only print symbols with a value up to ad- dress. --symbolize-operands When disassembling, symbolize a branch target operand to print a la- bel instead of a real address. When printing a PC-relative global symbol reference, print it as an offset from the leading symbol. Only works with an X86 linked image. Example: A non-symbolized branch instruction with a local target and pc-relative memory access like cmp eax, dword ptr [rip + 4112] jge 0x20117e <_start+0x25> might become <L0>: cmp eax, dword ptr <g> jge <L0> --triple=<string> Target triple to disassemble for, see --version for available tar- gets. -w, --wide Ignored for compatibility with GNU objdump. --x86-asm-syntax=<style> Deprecated. When used with --disassemble, choose style of code to emit from X86 backend. Supported values are: att AT&T-style assembly intel Intel-style assembly The default disassembly style is att. -z, --disassemble-zeroes Do not skip blocks of zeroes when disassembling. @<FILE> Read command-line options and commands from response file <FILE>. MACH-O ONLY OPTIONS AND COMMANDS --arch=<architecture> Specify the architecture to disassemble. see --version for available architectures. --archive-member-offsets Print the offset to each archive member for Mach-O archives (re- quires --archive-headers). --bind Display binding info --data-in-code Display the data in code table. --dis-symname=<name> Disassemble just the specified symbol's instructions. --dylibs-used Display the shared libraries used for linked files. --dsym=<string> Use .dSYM file for debug info. --dylib-id Display the shared library's ID for dylib files. --exports-trie Display exported symbols. --function-starts Print the function starts table for Mach-O objects. -g Print line information from debug info if available. --full-leading-addr Print the full leading address when disassembling. --indirect-symbols Display the indirect symbol table. --info-plist Display the info plist section as strings. --lazy-bind Display lazy binding info. --link-opt-hints Display the linker optimization hints. -m, --macho Use Mach-O specific object file parser. Commands and other options may behave differently when used with --macho. --no-leading-headers Do not print any leading headers. --no-symbolic-operands Do not print symbolic operands when disassembling. --non-verbose Display the information for Mach-O objects in non-verbose or numeric form. --objc-meta-data Display the Objective-C runtime meta data. --private-header Display only the first format specific file header. --rebase Display rebasing information. --rpaths Display runtime search paths for the binary. --universal-headers Display universal headers. --weak-bind Display weak binding information. XCOFF ONLY OPTIONS AND COMMANDS --symbol-description Add symbol description to disassembly output. BUGS To report bugs, please visit <https://bugs.llvm.org/>. SEE ALSO llvm-nm(1), llvm-otool(1), llvm-readelf(1), llvm-readobj(1) AUTHOR Maintained by the LLVM Team (https://llvm.org/). COPYRIGHT 2003-2026, LLVM Project 13 2026-08-04 LLVM-OBJDUMP(1)
NAME | SYNOPSIS | DESCRIPTION | COMMANDS | OPTIONS | MACH-O ONLY OPTIONS AND COMMANDS | XCOFF ONLY OPTIONS AND COMMANDS | BUGS | SEE ALSO | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=llvm-objdump13&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>