FreeBSD Manual Pages
LOGROTATE(8) System Administrator's Manual LOGROTATE(8) NAME logrotate - rotates, compresses, and mails system logs SYNOPSIS logrotate [--force] [--debug] [--state file] [--skip-state-lock] [--wait- for-state-lock] [--verbose] [--log file] [--mail command] config_file [con- fig_file2 ...] DESCRIPTION logrotate is designed to ease administration of systems that generate large numbers of log files. It allows automatic rotation, compression, removal, and mailing of log files. Each log file may be handled daily, weekly, monthly, or when it grows too large. Normally, logrotate is run as a daily cron job. It will not modify a log more than once in one day unless the criterion for that log is based on the log's size and logrotate is being run more than once each day, or unless the -f or --force option is used. Any number of config files may be given on the command line. Later config files may override the options given in earlier files, so the order in which the logrotate config files are listed is important. Normally, a sin- gle config file which includes any other config files which are needed should be used. See below for more information on how to use the include directive to accomplish this. If a directory is given on the command line, every file in that directory is used as a config file. If no command line arguments are given, logrotate will print version and copyright information, along with a short usage summary. If any errors oc- cur while rotating logs, logrotate will exit with non-zero status, although the state file will be updated. OPTIONS -f, --force Tells logrotate to force the rotation, even if it doesn't think this is necessary. Sometimes this is useful after adding new entries to a logrotate config file, or if old log files have been removed by hand, as the new files will be created, and logging will continue correctly. -d, --debug Turn on debug mode, which means that no changes are made to the logs and the logrotate state file is not updated. Only debug messages are printed. -s, --state statefile Tells logrotate to use an alternate state file. This is useful if logrotate is being run as a different user for various sets of log files. To prevent parallel execution logrotate by default acquires a lock on the state file, if it cannot be acquired logrotate will exit with value 3. The default state file is /var/run/logro- tate.status. If /dev/null is given as the state file, then logro- tate will not try to lock or write the state file. --skip-state-lock Do not lock the state file, for example if locking is unsupported or prohibited. --wait-for-state-lock Wait until lock on the state file is released by another logrotate process. This option may cause logrotate to wait indefinitely. Use with caution. -v, --verbose Turns on verbose mode, for example to display messages during rota- tion. -l, --log file Tells logrotate to log verbose output into the log_file. The ver- bose output logged to that file is the same as when running logro- tate with -v switch. The log file is overwritten on every logrotate execution. -m, --mail command Tells logrotate which command to use when mailing logs. This com- mand should accept the following arguments: 1) the subject of the message given with '-s subject' 2) the recipient. The command must then read a message on standard input and mail it to the recipient. The default mail command is /usr/bin/mailx. --usage Prints a short usage message. -?, --help Prints help message. --version Display version information. CONFIGURATION FILE logrotate reads everything about the log files it should be handling from the series of configuration files specified on the command line. Each con- figuration file can set global options (local definitions override global ones, and later definitions override earlier ones) and specify logfiles to rotate. Global options do not affect preceding include directives. A sim- ple configuration file looks like this: # sample logrotate configuration file compress /var/log/messages { rotate 5 weekly postrotate /usr/bin/killall -HUP syslogd endscript } "/var/log/httpd/access.log" /var/log/httpd/error.log { rotate 5 mail recipient@example.org size 100k sharedscripts postrotate /usr/bin/killall -HUP httpd endscript } /var/log/news/* { monthly rotate 2 olddir /var/log/news/old missingok sharedscripts postrotate kill -HUP $(cat /var/run/inn.pid) endscript nocompress } ~/log/*.log {} The first few lines set global options; in the example, logs are compressed after they are rotated. Note that comments may appear anywhere in the con- fig file as long as the first non-whitespace character on the line is a #. Values are separated from directives by whitespace and/or an optional =. Numbers must be specified in a format understood by strtoul(3). The next section of the config file defines how to handle the log file /var/log/messages. The log will go through five weekly rotations before being removed. After the log file has been rotated (but before the old version of the log has been compressed), the command /usr/bin/killall -HUP syslogd will be executed. The next section defines the parameters for both /var/log/httpd/access.log and /var/log/httpd/error.log. Each is rotated whenever it grows over 100 kilobytes in size, and the old logs files are mailed (uncompressed) to recipient@example.org after going through 5 rotations, rather than being removed. The sharedscripts means that the postrotate script will only be run once for this section, not once for each log which is rotated. Note that log file names may be enclosed in quotes (and that quotes are required if the name contains spaces). Normal shell quoting rules apply, with ', ", and \ characters supported. The next section defines the parameters for all of the files in /var/log/news. Each file is rotated on a monthly basis. The last section uses tilde expansion to rotate log files in the home di- rectory of the current user. This is only available, if your glob library supports tilde expansion. GNU glob does support this. Please use wildcards with caution. If you specify *, logrotate will rotate all files, including previously rotated ones. A way around this is to use the olddir directive or a more exact wildcard (such as *.log). Please note, by default when using systemd(1), the option ProtectSys- tem=full is set in the logrotate.service file. This prevents logrotate from modifying logs in /etc and /usr. Here is more information on the directives which may be included in a logrotate configuration file: CONFIGURATION FILE DIRECTIVES These directives may be included in a logrotate configuration file: Rotation rotate count Log files are rotated count times before being removed or mailed to the address specified in a mail directive. If count is 0, old ver- sions are removed rather than rotated. If count is -1, old logs are not removed at all, except they are affected by maxage (use with caution, may waste performance and disk space). Default is 0. olddir directory Logs are moved into directory for rotation. The directory must be on the same physical device as the log file being rotated, unless copy, copytruncate or renamecopy option is used. The directory is assumed to be relative to the directory holding the log file unless an absolute path name is specified. When this option is used all old versions of the log end up in directory. This option may be overridden by the noolddir option. noolddir Logs are rotated in the directory they normally reside in (this overrides the olddir option). su user group Rotate log files set under this user and group instead of using de- fault user/group (usually root). user specifies the user used for rotation and group specifies the group used for rotation (see the section USER AND GROUP for details). If the user/group you specify here does not have sufficient privilege to make files with the own- ership you've specified in a create directive, it will cause an er- ror. If logrotate runs with root privileges, it is recommended to use the su directive to rotate files in directories that are di- rectly or indirectly in control of non-privileged users. Frequency hourly Log files are rotated every hour. Note that usually logrotate is configured to be run by cron daily (or by logrotate.timer when using systemd(1)). You have to change this configuration and run logro- tate hourly to be able to really rotate logs hourly. daily Log files are rotated every day. weekly [weekday] Log files are rotated once each weekday, or if the date is advanced by at least 7 days since the last rotation (while ignoring the exact time). The weekday interpretation is following: 0 means Sunday, 1 means Monday, ..., 6 means Saturday; the special value 7 means each 7 days, irrespectively of weekday. Defaults to 0 if the weekday ar- gument is omitted. monthly Log files are rotated the first time logrotate is run in a month (this is normally on the first day of the month). yearly Log files are rotated if the current year is not the same as the last rotation. size size Log files are rotated only if they grow bigger than size bytes. If size is followed by k, the size is assumed to be in kilobytes. If M is used, the size is in megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G are all valid. This option is mutually exclusive with the time interval op- tions, and it causes log files to be rotated without regard for the last rotation time, if specified after the time criteria (the last specified option takes the precedence). File selection missingok If the log file is missing, go on to the next one without issuing an error message. See also nomissingok. nomissingok If a log file does not exist, issue an error. This is the default. ignoreduplicates Ignore any following matches of a log file. ifempty Rotate the log file even if it is empty, overriding the notifempty option (ifempty is the default). notifempty Do not rotate the log if it is empty (this overrides the ifempty op- tion). minage count Do not rotate logs which are less than <count> days old. maxage count Remove rotated logs older than <count> days. The age is only checked if the logfile is to be rotated. rotate -1 does not hinder removal. The files are mailed to the configured address if maillast and mail are configured. minsize size Log files are rotated when they grow bigger than size bytes, but not before the additionally specified time interval (daily, weekly, monthly, or yearly). The related size option is similar except that it is mutually exclusive with the time interval options, and it causes log files to be rotated without regard for the last rotation time, if specified after the time criteria (the last specified op- tion takes the precedence). When minsize is used, both the size and timestamp of a log file are considered. maxsize size Log files are rotated when they grow bigger than size bytes even be- fore the additionally specified time interval (daily, weekly, monthly, or yearly). The related size option is similar except that it is mutually exclusive with the time interval options, and it causes log files to be rotated without regard for the last rotation time, if specified after the time criteria (the last specified op- tion takes the precedence). When maxsize is used, both the size and timestamp of a log file are considered. tabooext [+] list The current taboo extension list is changed (see the include direc- tive for information on the taboo extensions). If a + precedes the list of extensions, the current taboo extension list is augmented, otherwise it is replaced. At startup, the taboo extension list ,v, .bak, .cfsaved, .disabled, .dpkg-bak, .dpkg-del, .dpkg-dist, .dpkg-new, .dpkg-old, .dpkg-tmp, .new, .old, .orig, .rhn-cfg-tmp-*, .rpmnew, .rpmorig, .rpmsave, .swp, .ucf-dist, .ucf-new, .ucf-old, ~ taboopat [+] list The current taboo glob pattern list is changed (see the include di- rective for information on the taboo extensions and patterns). If a + precedes the list of patterns, the current taboo pattern list is augmented, otherwise it is replaced. At startup, the taboo pattern list is empty. Files and Folders create mode owner group, create owner group Immediately after rotation (before the postrotate script is run) the log file is created (with the same name as the log file just ro- tated). mode specifies the mode for the log file in octal (the same as chmod(2)), owner specifies the user who will own the log file, and group specifies the group the log file will belong to (see the section USER AND GROUP for details). Any of the log file attributes may be omitted, in which case those attributes for the new file will use the same values as the original log file for the omitted attrib- utes. This option can be disabled using the nocreate option. nocreate New log files are not created (this overrides the create option). createolddir mode [owner [group]], createolddir [owner [group]] If the directory specified by olddir directive does not exist, it is created. mode specifies the mode for the olddir directory in octal (the same as chmod(2)), owner specifies the user who will own the olddir directory, and group specifies the group the olddir directory will belong to (see the section USER AND GROUP for details). If mode is not specified, 0755 is assumed. This option can be disabled using the nocreateolddir option. nocreateolddir olddir directory is not created by logrotate when it does not exist. copy Make a copy of the log file, but don't change the original at all. This option can be used, for instance, to make a snapshot of the current log file, or when some other utility needs to truncate or parse the file. When this option is used, the create option will have no effect, as the old log file stays in place. The copy option allows storing rotated log files on the different devices using old- dir directive. nocopy Do not copy the original log file and leave it in place. (this overrides the copy option). copytruncate Truncate the original log file to zero size in place after creating a copy, instead of moving the old log file and optionally creating a new one. It can be used when some program cannot be told to close its logfile and thus might continue writing (appending) to the pre- vious log file forever. Note that there is a very small time slice between copying the file and truncating it, so some logging data might be lost. When this option is used, the create option will have no effect, as the old log file stays in place. The copytrun- cate option allows storing rotated log files on the different de- vices using olddir directive. The copytruncate option implies nore- namecopy. nocopytruncate Do not truncate the original log file in place after creating a copy (this overrides the copytruncate option). renamecopy Log file is renamed to temporary filename in the same directory by adding ".tmp" extension to it. After that, postrotate script is run and log file is copied from temporary filename to final filename. In the end, temporary filename is removed. The renamecopy option allows storing rotated log files on the different devices using old- dir directive. The renamecopy option implies nocopytruncate. norenamecopy Do not rename and copy the original log file (this overrides the re- namecopy option). shred Delete log files using shred -u instead of unlink(). This should ensure that logs are not readable after their scheduled deletion; this is off by default. See also noshred. noshred Do not use shred when deleting old log files. See also shred. shredcycles count Asks GNU shred(1) to overwrite log files count times before dele- tion. Without this option, shred's default will be used. allowhardlink Rotate files with multiple hard links; this is off by default. The target file might get emptied, e.g. with shred or copytruncate. Use with caution, especially when the log files are rotated as root. noallowhardlink Do not rotate files with multiple hard links. See also al- lowhardlink. Compression compress Old versions of log files are compressed with gzip(1) by default. See also nocompress. nocompress Old versions of log files are not compressed. See also compress. compresscmd Specifies which command to use to compress log files. The default is gzip(1). See also compress. uncompresscmd Specifies which command to use to uncompress log files. The default is gunzip(1). compressext Specifies which extension to use on compressed logfiles, if compres- sion is enabled. The default follows that of the configured com- pression command. compressoptions Command line options may be passed to the compression program, if one is in use. The default, for gzip(1), is "-6" (biased towards high compression at the expense of speed). If you use a different compression command, you may need to change the compressoptions to match. delaycompress Postpone compression of the previous log file to the next rotation cycle. This only has effect when used in combination with compress. It can be used when some program cannot be told to close its logfile and thus might continue writing to the previous log file for some time. nodelaycompress Do not postpone compression of the previous log file to the next ro- tation cycle (this overrides the delaycompress option). Filenames extension ext Log files with ext extension can keep it after the rotation. If compression is used, the compression extension (normally .gz) ap- pears after ext. For example you have a logfile named mylog.foo and want to rotate it to mylog.1.foo.gz instead of mylog.foo.1.gz. addextension ext Log files are given the final extension ext after rotation. If the original file already ends with ext, the extension is not dupli- cated, but merely moved to the end, that is both filename and file- nameext would get rotated to filename.1ext. If compression is used, the compression extension (normally .gz) appears after ext. start count This is the number to use as the base for rotation. For example, if you specify 0, the logs will be created with a .0 extension as they are rotated from the original log files. If you specify 9, log files will be created with a .9, skipping 0-8. Files will still be rotated the number of times specified with the rotate directive. dateext Archive old versions of log files adding a date extension like YYYYMMDD instead of simply adding a number. The extension may be configured using the dateformat and dateyesterday options. nodateext Do not archive old versions of log files with date extension (this overrides the dateext option). dateformat format_string Specify the extension for dateext using the notation similar to strftime(3) function. Only %Y %m %d %H %M %S %V %s and %z speci- fiers are allowed. The default value is -%Y%m%d except hourly, which uses -%Y%m%d%H as default value. Note that also the character separating log name from the extension is part of the dateformat string. The system clock must be set past Sep 9th 2001 for %s to work correctly. Note that the datestamps generated by this format must be lexically sortable (that is first the year, then the month then the day. For example 2001/12/01 is ok, but 01/12/2001 is not, since 01/11/2002 would sort lower while it is later). This is be- cause when using the rotate option, logrotate sorts all rotated filenames to find out which logfiles are older and should be re- moved. dateyesterday Use yesterday's instead of today's date to create the dateext exten- sion, so that the rotated log file has a date in its name that is the same as the timestamps within it. datehourago Use hour ago instead of current date to create the dateext exten- sion, so that the rotated log file has a hour in its name that is the same as the timestamps within it. Useful with rotate hourly. Mail mail address When a log is rotated out of existence, it is mailed to address. If no mail should be generated by a particular log, the nomail direc- tive may be used. nomail Do not mail old log files to any address. mailfirst When using the mail command, mail the just-rotated file, instead of the about-to-expire file. maillast When using the mail command, mail the about-to-expire file, instead of the just-rotated file (this is the default). Additional config files include file_or_directory Reads the file given as an argument as if it was included inline where the include directive appears. If a directory is given, most of the files in that directory are read in alphabetic order before processing of the including file continues. The only files which are ignored are files which are not regular files (such as directo- ries and named pipes) and files whose names end with one of the taboo extensions or patterns, as specified by the tabooext or taboopat directives, respectively. The given path may start with ~/ to make it relative to the home directory of the executing user. For security reasons configuration files must not be group-writable nor world-writable. Scripts sharedscripts Normally, prerotate and postrotate scripts are run for each log which is rotated and the absolute path to the log file is passed as first argument to the script. That means a single script may be run multiple times for log file entries which match multiple files (such as the /var/log/news/* example). If sharedscripts is specified, the scripts are only run once, no matter how many logs match the wild- carded pattern, and whole pattern is passed to them. However, if none of the logs in the pattern require rotating, the scripts will not be run at all. If the scripts exit with error (or any log fails to rotate), the remaining actions will not be executed for any logs. This option overrides the nosharedscripts option. nosharedscripts Run prerotate and postrotate scripts for every log file which is ro- tated (this is the default, and overrides the sharedscripts option). The absolute path to the log file is passed as first argument to the script. The absolute path to the final rotated log file is passed as the second argument to the postrotate script. If the scripts exit with error, the remaining actions will not be executed for the affected log only. firstaction script endscript The script is executed once before all log files that match the wildcarded pattern are rotated, before the prerotate script is run and only if at least one log will actually be rotated. These direc- tives may only appear inside a log file definition. The whole pat- tern is passed to the script as its first argument. If the script exits with an error, no further processing is done. See also las- taction and the SCRIPTS section. lastaction script endscript The script is executed once after all log files that match the wild- carded pattern are rotated, after the postrotate script is run and only if at least one log is rotated. These directives may only ap- pear inside a log file definition. The whole pattern is passed to the script as its first argument. If the script exits with an er- ror, just an error message is shown (as this is the last action). See also firstaction and the SCRIPTS section. prerotate script endscript The script is executed before the log file and its old logs are ro- tated and only if the log will actually be rotated. These direc- tives may only appear inside a log file definition. Normally, the absolute path to the log file is passed as the first argument to the script. If sharedscripts is specified, the whole pattern is passed to the script. See also postrotate and the SCRIPTS section. See sharedscripts and nosharedscripts for error handling. postrotate script endscript The script is executed after the log file is rotated and before the log file is being compressed. These directives may only appear in- side a log file definition. Normally, the absolute path to the log file is passed as the first argument to the script and the absolute path to the final rotated log file is passed as the second argument to the script. If sharedscripts is specified, the whole pattern is passed as the first argument to the script, and the second argument is omitted. See also prerotate and the SCRIPTS section. See sharedscripts and nosharedscripts for error handling. preremove script endscript The script is executed once just before removal of a log file. logrotate will pass the name of file which is soon to be removed as the first argument to the script. See also firstaction and the SCRIPTS section. SCRIPTS The lines between the starting keyword (e.g. prerotate) and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh). The script inherits some traits from the logrotate process, including stderr, stdout, the current directory, the environment, and the umask. Scripts are run as the invoking user and group, irrespective of any su di- rective. If the --log flag was specified, file descriptor 3 is the log file. The current working directory is unspecified. USER AND GROUP User and group identifiers are resolved first by trying the textual repre- sentation and, in case it fails, afterwards by the numeric value. FILES /var/run/logrotate.status Default state file. /etc/logrotate.conf Configuration options. SEE ALSO chmod(2), gunzip(1), gzip(1), mail(1), shred(1), strftime(3), strtoul(3), <https://github.com/logrotate/logrotate> AUTHORS Erik Troan, Preston Brown, Jan Kaluza. <https://github.com/logrotate/logrotate> Linux 3.22.0 LOGROTATE(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION FILE | CONFIGURATION FILE DIRECTIVES | SCRIPTS | USER AND GROUP | FILES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=logrotate&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>