FreeBSD Manual Pages
MD-MX-CTRL(8) System Manager's Manual MD-MX-CTRL(8) NAME md-mx-ctrl - Control mimedefang-multiplexor SYNOPSIS md-mx-ctrl [options] command DESCRIPTION md-mx-ctrl is a command-line tool for communicating with mimedefang-multi- plexor(8). OPTIONS -h Displays usage information. -s path Specifies the path to the mimedefang-multiplexor socket. If not specified, defaults to /var/spool/MIMEDefang/mimedefang-multi- plexor.sock. -i This flag causes md-mx-ctrl to sit in a loop, reading commands on standard input and printing results to standard output. It is in- tended for use by a monitoring program such as watch-mimedefang. COMMANDS The following commands are available: status Prints the status of all worker Perl processes in human-readable format. rawstatus Prints the status of all worker Perl processes in a format easy to parse by computer. The result is a single line with six words on it. The words are separated by a single space character. Each character in the first word corresponds to a worker, and is "I" for an idle worker, "B" for a busy worker, "S" for a worker which is not running, and "K" for a worker which has been killed, but has not yet exited. A worker is "idle" if there is a running Perl process waiting to do work. "Busy" means the Perl process is currently fil- tering a message. "S" means there is no associated Perl process with the worker, but one can be started if the load warrants. Fi- nally, "K" means the worker Perl process has been killed, but has yet to terminate. The second word is the total number of messages processed since the multiplexor started up. The third word is the total number of work- ers which have been activated since the multiplexor started up. (That is, it's a count of the number of times the multiplexor has forked and exec'd the Perl filter.) The fourth word is the size of the queue for request queuing, and the fifth word is the actual number of requests in the queue. The sixth word is the number of seconds elapsed since the multiplexor was started. barstatus Prints the status of busy workers and queued requests in a nice "bar chart" format. This lets you keep an eye on things with a script like this: while true ; do md-mx-ctrl barstatus sleep 1 done histo Prints a histogram showing the number of workers that were busy each time a request was processed. A single line is printed for the num- bers from 1 up to the maximum number of workers. Each line contains the count of busy workers (1, 2, 3 up to MX_MAXIMUM), a space, and the number of times that many workers were busy when a request was processed. load Prints a table showing "load averages" for the last 10 seconds, 1 minute, 5 minutes and 10 minutes. Each row in the table corresponds to a time interval, displayed in the first column. The remaining columns in the table are: Msgs: The number of messages scanned within the row's time interval. Msgs/Sec: The average number of messages scanned per second within the row's time interval. Avg Busy Workers: The average number of busy workers whenever a mes- sage was scanned. (If you are processing any mail at all, this num- ber will be at least 1, because there is always 1 busy worker when a message is scanned.) If you have the watch(1) command on your system, you can keep an eye on the load with this command: watch -n 10 md-mx-ctrl load If you do not have watch, the following shell script is a less fancy equivalent: #!/bin/sh while true; do clear date md-mx-ctrl load sleep 10 done rawload Prints the load averages in computer-readable format. The format consists of twenty-nine space-separated numbers: The first four are integers representing the number of messages scanned in the last 10 seconds, 1 minute, 5 minutes and 10 minutes. The second four are floating-point numbers representing the average number of busy workers in the last 10 seconds, 1 minute, 5 minutes and 10 minutes. The third four are floating-point numbers representing the average time per scan in milliseconds over the last 10 seconds, 1 minute, 5 minutes and 10 minutes. The fourth four are the number of worker activations (new workers started) over the last 10 seconds, 1 minute, 5 minutes and 10 min- utes. The fifth four are the number of workers reaped (workers that have exited) over the last 10 seconds, 1 minute, 5 minutes and 10 min- utes. The sixth four are the number of busy, idle, stopped and killed workers. The seventh four are the number of messages processed, the number of worker activations, the size of the request queue, and the number of requests actually on the queue. The final number is the number of seconds since the multiplexor was started. load-relayok Similar to load, but shows timings for filter_relay calls. load-senderok Similar to load, but shows timings for filter_sender calls. load-recipok Similar to load, but shows timings for filter_recipient calls. rawload-relayok Similar to rawload, but shows timings for filter_relay calls. Note that the worker activation and reap statistics are present, but al- ways 0. They are only valid in a rawload command. rawload-senderok Similar to rawload, but shows timings for filter_sender calls. Note that the worker activation and reap statistics are present, but al- ways 0. They are only valid in a rawload command. rawload-recipok Similar to rawload, but shows timings for filter_recipient calls. Note that the worker activation and reap statistics are present, but always 0. They are only valid in a rawload command. load1 nsecs The load1 command displays the load for various commands over the last nsecs seconds, where nsecs is an integer from 10 to 600. The load1 command combines the output of load, load-relayok, load- senderokf and load-recipok into one display. You might use the command like this: watch -n 10 md-mx-ctrl load1 60 rawload1 nsecs Returns the load1 data in human-readable format. The result is a line containing twenty-six space-separated numbers: The first three numbers are the number of scans performed in the last nsecs seconds, the average number of busy workers when a scan was initiated and the average number of milliseconds per scan. The second three are the same measurements for filter_relay calls. The third three are the same measurements for filter_sender calls. The fourth three are the same measurements for filter_relay calls. The thirteenth through sixteenth numbers are the number of busy, idle, stopped and killed workers, respectively. The seventeenth number is the number of scans since mimedefang-mul- tiplexor was started. The eighteenth number is the number of times a new worker has been activated since program startup. The nineteenth number is the size of the request queue and the twen- tieth number is the actual number of queued requests. The twenty-first number is the time since program startup and the twenty-second number is a copy of nsecs for convenience. The twenty-third through twenty-sixth numbers are the number of workers currently executing a scan, relayok, senderok and recipok command respectively. workers Displays a list of workers and their process IDs. Each line of out- put consists of a worker number, a status (I, B, K, or S), and for idle or busy workers, the process-ID of the worker. For busy work- ers, the line may contain additional information about what the worker is doing. The command slaves is a deprecated synonym for this command. busyworkers Similar to workers, but only outputs a line for each busy worker. The command busyslaves is a deprecated synonym for this command. workerinfo n Displays information about worker number n. The command slaveinfo is a deprecated synonym for this command. reread Forces mimedefang-multiplexor to kill all idle workers, and termi- nate and restart busy workers when they become idle. This forces a reread of filter rules. msgs Prints the total number of messages scanned since the multiplexor started. ADDITIONAL COMMANDS You can supply any other command and arguments to md-mx-ctrl. It percent- encodes each command-line argument, glues the encoded arguments together with a single space between each, and sends the result to the multiplexor as a command. This allows you to send arbitrary commands to your Perl workers. See the section "EXTENDING MIMEDEFANG" in mimedefang-filter(5) for additional details. PERMISSIONS md-mx-ctrl uses the multiplexor's socket; therefore, it probably needs to be run as root or the same user as mimedefang-multiplexor. AUTHOR md-mx-ctrl was written by Dianne Skoll <dfs@roaringpenguin.com>. The mimedefang home page is http://www.mimedefang.org/. SEE ALSO mimedefang.pl(8), mimedefang-filter(5), mimedefang(8), mimedefang-proto- col(7), watch-mimedefang(8) 4th Berkeley Distribution 8 February 2005 MD-MX-CTRL(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | ADDITIONAL COMMANDS | PERMISSIONS | AUTHOR | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=md-mx-ctrl&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>