FreeBSD Manual Pages
METASYS(8) NUT Manual METASYS(8) NAME metasys - Driver for Meta System UPS equipment SYNOPSIS metasys -h metasys -a UPS_NAME [OPTIONS] Note This man page only documents the hardware-specific features of the metasys driver. For information about the core driver, see nutups- drv(8). SUPPORTED HARDWARE The metasys driver was written with the "Meta System UPS Protocol Rev.1.12" kindly supplied from Meta System. The driver should support all the common features of the UPS models: * HF Line (/2) 1-8 boards * HF Millennium (810, 820) * HF TOP Line (910, 920, 930, 940, 950, 970, 980) * ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000) * ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI) * ally HF (800, 1000, 1250, 1600, 2000, 2500) * Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000) CABLING The needed cable is a standard pin-to-pin serial cable with at least pins 2, 3, and 5 (on DB9 connector) connected. EXTRA ARGUMENTS This driver supports no extra arguments from ups.conf(5). BUGS This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only. Any information about the use of the driver with the other listed UPS are really welcome. AUTHOR Fabio Di Niro <blaxwan@users.sourceforge.net> SEE ALSO The core driver: nutupsdrv(8) Internet resources: * The NUT (Network UPS Tools) home page: https://www.networkupstools.org/ * Meta System UPS protocol: https://networkupstools.org/ups-proto- cols.html#_legrand Network UPS Tools 2.8.5. 08/04/2026 METASYS(8)
NAME | SYNOPSIS | SUPPORTED HARDWARE | CABLING | EXTRA ARGUMENTS | BUGS | AUTHOR | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=metasys&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>