FreeBSD Manual Pages
MIKTEX-DVIPS(1) User Commands MIKTEX-DVIPS(1) NAME miktex-dvips - convert a DVI file to PostScript SYNOPSIS miktex-dvips [option...] dvifile DESCRIPTION This man page is an adaption of the corresponding TeX Live man page. This man page is obsolete! See the Texinfo documentation instead. Dvips takes a DVI file produced by TeX (or by some other processor such as miktex-gftodvi) and converts it to PostScript. The DVI file may be speci- fied without the .dvi. extension. OPTIONS Many of the parameterless options listed here can be turned off by suffix- ing the option with a zero (0); for instance, to turn off page reversal, use -r0. Such options are marked with a trailing *. - Read additional options from standard input after processing the com- mand line. --help Print a usage message and exit. --version Print the version number and exit. -a* Conserve memory by making three passes over the DVI file instead of two and only loading those characters actually used. Generally only useful on machines with a very limited amount of memory. -A Print only the odd pages. This option uses TeX page numbers, not physi- cal page numbers. -b num Generate num copies of each page, but duplicating the page body rather than using the /#copiesPostScript variable. This can be useful in con- junction with a header file setting bop-hook to do color separations or other neat tricks. -B Print only the even pages. This option uses TeX page numbers, not phys- ical page numbers. -c num Generate num consecutive copies of every page, i.e., the output is un- collated. This merely sets the builtin PostScript variable /#copies. -C num Generate num copies, but collated (by replicating the data in the Post- Script file). Slower than the -c option, but easier on the hands, and faster than resubmitting the same PostScript file multiple times. -d num Set the debug flags, showing what Dvips (thinks it) is doing. See the Dvips manual, for the possible values of num. Use -d -1 as the first option for maximum output. -D num Set both the horizontal and vertical resolution to num, given in dpi (dots per inch). This affects the choice of bitmap fonts that are loaded and also the positioning of letters in resident PostScript fonts. Must be between 10 and 10000. This affects both the horizontal and vertical resolution. If a high resolution (something greater than 400 dpi, say) is selected, the -Z flag should probably also be used. If you are using fonts made with METAFONT, such as Computer Modern, makepk needs to know about the value for num that you use or METAFONT will fail. See the file modes.mf for a list of resolutions and mode names for most devices. -e num Maximum drift in pixels of each character from its "true" resolu- tion-independent position on the page. The default value of this para- meter is resolution dependent (it is the number of entries in the list [100, 200, 300, 400, 500, 600, 800, 1000, 1200, 1600, 2000, 2400, 2800, 3200, ...] that are less than or equal to the resolution in dots per inch). Allowing individual characters to "drift" from their correctly rounded positions by a few pixels, while regaining the true position at the beginning of each new word, improves the spacing of letters in words. -E* Generate an EPSF file with a tight bounding box. This only looks at marks made by characters and rules, not by any included graphics. In addition, it gets the glyph metrics from the TFM file, so characters that print outside their enclosing TFM box may confuse it. In addition, the bounding box might be a bit too loose if the character glyph has significant left or right side bearings. Nonetheless, this option works well enough for creating small EPSF files for equations or tables or the like. (Of course, Dvips output, especially when using bitmap fonts, is resolution-dependent and thus does not make very good EPSF files, especially if the images are to be scaled; use these EPSF files with care.) For multiple page input files, also specify -i to get each page as a separate EPSF file; otherwise, all the pages are overlaid in the single output file. -f* Read the DVI file from standard input and write the PostScript to stan- dard output. The standard input must be seekable, so it cannot be a pipe. If your input must be a pipe, write a shell script that copies the pipe output to a temporary file and then points Dvips at this file. It turns off the automatic sending of control-D if it was turned on with the -F option or in the configuration file; use -F after the -f to send it anyway. -F* Write control-D (ASCII code 4) as the very last character of the Post- Script file. This is useful when Dvips is driving the printer directly instead of working through a spooler, as is common on personal systems. On systems shared by more than one person, this is not recommended. -G Shift non-printing characters (ASCII 0-32, 127) to higher-numbered po- sitions. This was useful to work around bugs in old versions of Adobe's PDF reader. It's more likely to cause problems nowadays. -h name Prepend name as an additional header file, or, if name is -, suppress all header files. Any definitions in the header file get added to the PostScriptuserdict. -i* Make each section be a separate file; a section is a part of the docu- ment processed independently, most often created to avoid memory over- flow. The filenames are created replacing the suffix of the supplied output file name by a three-digit sequence number. This option is most often used in conjunction with the -S option which sets the maximum section length in pages; if -i is specified and -S is not, each page is output as a separate file. For instance, some phototypesetters cannot print more than ten or so consecutive pages before running out of steam; these options can be used to automatically split a book into ten-page sections, each to its own file. On the other hand, if your document uses very large fonts or very large included figures, Dvips might take it upon itself to split the output into unwanted sections, to try to avoid overflowing printer memory. -j* Download only needed characters from Type 1 fonts. This is the default. Some debugging flags trace this operation. You can also control partial downloading on a per-font basis. -k* Print crop marks. This option increases the paper size (which should be specified, either with a paper size special or with the -T option) by a half inch in each dimension. It translates each page by a quarter inch and draws cross-style crop marks. It is mostly useful with typesetters that can set the page size automatically. This works by downloading crop.pro. -K* Remove comments in included PostScript graphics, font files, and head- ers; only necessary to get around bugs in spoolers or PostScript post-processing programs. Specifically, the %%Page comments, when left in, often cause difficulties. Use of this flag can cause other graphics to fail, however, since the PostScript header macros from some software packages read portion the input stream line by line, searching for a particular comment. -l [=]num The last page printed will be the first one numbered num. Default is the last page in the document. If num is prefixed by an equals sign, then it (and the argument to the -p option, if specified) is treated as a physical (absolute) page number, rather than a value to compare with the TeX\count0 values stored in the DVI file. Thus, using -l =9 will end with the ninth page of the document, no matter what the pages are actually numbered. -m* Specify manual feed, if supported by the output device. -mode mode Use mode as the METAFONT device name for path searching and font gener- ation. This overrides any value from configuration files. With the de- fault paths, explicitly specifying the mode also makes the program as- sume the fonts are in a subdirectory named mode. -M* Turns off automatic font generation. -n num Print at most num pages. Default is 100000. -n num Print at most num pages. Default is 100000. -N* Turns off generation of structured comments such as %%Page; this may be necessary on some systems that try to interpret PostScript comments in weird ways, or on some PostScript printers. Beware: This also disables page movement, etc., in PostScript viewers such as GSview. -noomega Disable the use of Omega extensions when interpreting DVI files. By de- fault, the additional opcodes 129 and 134 are recognized by Dvips as Omega or pTeX extensions and interpreted as requests to set 2-byte characters. -noptex Disable the use of pTeX extensions when interpreting DVI files. By de- fault, the additional opcodes 130 and 135 are recognized by Dvips as Omega extensions and interpreted as requests to set 3-byte characters, and 255 as request to change the typesetting direction. The only drawback is that the virtual font array will (at least tem- porarily) require 65536 or more positions instead of the default 256 positions, i.e., the memory requirements of Dvips will be somewhat larger. If you find this unacceptable or encounter another problem with the Omega or pTeX extensions, you can switch off the pTeX extension by -noptex, or both by -noomega. -o name Send output to the file name. If -o is specified without name, the de- fault is file.ps where the input DVI file was file.dvi. If -o isn't given at all, the configuration file default is used. If name is -, output goes to standard output. If the first character of name is ! or |, then the remainder will be used as an argument to popen; thus, specifying |lpr as the output file will automatically queue the file for printing as usual. Dvips will print to the local printer device PRN when name is |lpr and a program by that name cannot be found. -o turns off the automatic sending of control-D. See the -f option for how to override this. -O x-offset,y-offset Move the origin by x-offset,y-offset, a comma-separated pair of dimen- sions such as .1in,-.3cm. The origin of the page is shifted from the default position (of one inch down, one inch to the right from the up- per left corner of the paper) by this amount. This is usually best specified in the printer-specific configuration file. This is useful for a printer that consistently offsets output pages by a certain amount. You can use the file testpage.tex to determine the correct value for your printer. Be sure to do several runs with the same O value-some printers vary widely from run to run. If your printer offsets every other page consistently, instead of every page, your best recourse is to use bop-hook (see the Dvips manual for more information). -p [=]num The first page printed will be the first one numbered num. Default is the first page in the document. If num is prefixed by an equals sign, then it (and the argument to the -l option, if specified) is treated as a physical (absolute) page number, rather than a value to compare with the TeX\count0 values stored in the DVI file. Thus, using -p =3 will start with the third page of the document, no matter what the pages are actually numbered. -pp first-last Print pages first through last; equivalent to -p first -l last, except that multiple -pp options accumulate, unlike -p and -l. The - separator can also be :. -P printer Read the configuration file config.printer, which can set the output name (most likely o |lpr -Pprinter), resolution, METAFONT mode, and perhaps font paths and other printer-specific defaults. It works best to put sitewide defaults in the one master config.ps file and only things that vary printer to printer in the config.printer files; con- fig.ps is read before config.printer. A configuration file for eventual creation of Adobe PDF files is pro- vided in config.pdf and thus can be loaded with -Ppdf. It will try to include Type 1 outline fonts into the PostScript file. -q* Run quietly. Don't chatter about pages converted, etc. to standard out- put; report no warnings (only errors) to standard error. -r* Output pages in reverse order. By default, page 1 is output first. -R Run securely. -R2 disables both shell command execution in \special (via `) and config files (via the E), pipes as output files, and open- ing of any absolute or ..-relative filenames. -R1, the default, for- bids shell escapes but allows absolute filenames. -R0 allows both. -s* Enclose the output in a global save/restore pair. This causes the file to not be truly conformant, and is thus not recommended, but is useful if you are driving a deficient printer directly and thus don't care too much about the portability of the output to other environments. -S num Set the maximum number of pages in each "section". This option is most commonly used with the -i option; see its description above for more information. -t papertype Set the paper type to papertype, usually defined in one of the configu- ration files, along with the appropriate PostScript code to select it. You can also specify a papertype of landscape, which rotates a document by 90 degrees. To rotate a document whose paper type is not the de- fault, you can use the -t option twice, once for the paper type, and once for landscape. In general, you should not use any -t option when using a papaersize special, which some LaTeX packages (e.g., hyperref) insert One exception is when using a nonstandard paper size that is not al- ready defined in config.ps; in this case, you need to specify -t un- known. Another exception is when producing multi-page files for further pro- cessing; use -t nopaper to omit any paper size information in the out- put. (If you just have a single page document, you can use -E to get pure EPSF output.) -T hsize,vsize Set the paper size to (hsize,vsize), a comma-separated pair of dimen- sions such as .1in,-.3cm. It overrides any paper size special in the DVI file. Be careful, as the paper size will stick to a predefined size if there is one close enough. To disable this behavior, use -tunknown -u psmapfile Set psmapfile to be the file that Dvips uses for looking up PostScript font aliases. If psmapfile starts with a + character, then the rest of the name is used as the name of the map file, and the map file is ap- pended to the list of map files (instead of replacing the list). In ei- ther case, if the name has no extension, .map is added at the end. -U* Disable a PostScript virtual memory-saving optimization that stores the character metric information in the same string that is used to store the bitmap information. This is only necessary when driving the Xerox 4045 PostScript interpreter, which has a bug that puts garbage on the bottom of each character. Not recommended unless you must drive this printer. -v Print the Dvips version number and exit. -V* Download non-resident PostScript fonts as bitmaps. This requires use of makepk to generate the required bitmap fonts. The bitmap must be put into psfonts.map as the downloadable file for that font. This is useful only for those fonts for which you do not have real outlines, being downloaded to printers that have no resident fonts, i.e., very rarely. -x num Set the x magnification ratio to num/1000. Overrides the magnification specified in the DVI file. Must be between 10 and 100000. It is recom- mended that you use standard magstep values (1095, 1200, 1440, 1728, 2074, 2488, 2986, and so on) to help reduce the total number of PK files generated. num may be a real number, not an integer, for in- creased precision. -X num Set the horizontal resolution in dots per inch to num. -y num Set the y magnification ratio to num/1000. See -x above. -Y num Set the vertical resolution in dots per inch to num. -z* Pass html hyperdvi specials through to the output for eventual distil- lation into PDF. This is not enabled by default to avoid including the header files unnecessarily, and use of temporary files in creating the output. -Z* Compress bitmap fonts in the output file, thereby reducing the size of what gets downloaded. Especially useful at high resolutions or when very large fonts are used. May slow down printing, especially on early 68000-based PostScript printers. Generally recommend today, and can be enabled in the configuration file. ENVIRONMENT MIKTEX_TRACE Comma-separated list of trace stream names (see Chapter 9, Trace Streams). If this variable is set, then MiKTeX programs will write trace messages into the configured log sink. MiKTeX 25.4 April 18, 2025 MIKTEX-DVIPS(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=miktex-dvips&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>