MKSQUASHFS(1) User Commands MKSQUASHFS(1) NAME mksquashfs - tool to create and append to squashfs filesystems SYNOPSIS mksquashfs source1 source2 ... FILESYSTEM [OPTIONS] [-e list of exclude dirs/files] DESCRIPTION Squashfs is a highly compressed read-only filesystem for Linux. It uses either gzip/xz/lzo/lz4/zstd compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 1Mbytes (default block size 128K). Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. OPTIONS Filesystem compression options: -b BLOCK_SIZE set data block to BLOCK_SIZE. Default 128 Kbytes. Optionally a suf- fix of K or M can be given to specify Kbytes or Mbytes respectively. -comp COMP select COMP compression. Compressors available: gzip (default), lzo, lz4, xz, zstd, lzma. -noI do not compress inode table. -noId do not compress the uid/gid table (implied by -noI). -noD do not compress data blocks. -noF do not compress fragment blocks. -noX do not compress extended attributes. -no-compression do not compress any of the data or metadata. This is equivalent to specifying -noI -noD -noF and -noX. Filesystem build options: -tar read uncompressed tar file from standard in (stdin). -no-strip act like tar, and do not strip leading directories from source files. -tarstyle alternative name for -no-strip. -cpiostyle act like cpio, and read file pathnames from standard in (stdin). -cpiostyle0 like -cpiostyle, but filenames are null terminated. Can be used with find -print0 action. -reproducible build filesystems that are reproducible (default). -not-reproducible build filesystems that are not reproducible. -mkfs-time TIME set filesystem creation timestamp to TIME. TIME can be an unsigned 32-bit int indicating seconds since the epoch (1970-01-01) or a string value which is passed to the "date" command to parse. Any string value which the date command recognises can be used such as "now", "last week", or "Wed Feb 15 21:02:39 GMT 2023". -all-time TIME set all file timestamps to TIME. TIME can be an unsigned 32-bit int indicating seconds since the epoch (1970-01-01) or a string value which is passed to the "date" command to parse. Any string value which the date command recognises can be used such as "now", "last week", or "Wed Feb 15 21:02:39 GMT 2023". -root-time TIME set root directory time to TIME. TIME can be an unsigned 32-bit int indicating seconds since the epoch (1970-01-01) or a string value which is passed to the "date" command to parse. Any string value which the date command recognises can be used such as "now", "last week", or "Wed Feb 15 21:02:39 GMT 2023". -root-mode MODE set root directory permissions to octal MODE. -root-uid VALUE set root directory owner to specified VALUE, VALUE can be either an integer uid or user name. -root-gid VALUE set root directory group to specified VALUE, VALUE can be either an integer gid or group name. -all-root make all files owned by root. -force-uid VALUE set all file uids to specified VALUE, VALUE can be either an integer uid or user name. -force-gid VALUE set all file gids to specified VALUE, VALUE can be either an integer gid or group name. -pseudo-override make pseudo file uids and gids override -all-root, -force-uid and -force-gid options. -no-exports do not make filesystem exportable via NFS (-tar default). -exports make filesystem exportable via NFS (default). -no-sparse do not detect sparse files. -no-tailends do not pack tail ends into fragments (default). -tailends pack tail ends into fragments. -no-fragments do not use fragments. -no-duplicates do not perform duplicate checking. -no-hardlinks do not hardlink files, instead store duplicates. -keep-as-directory if one source directory is specified, create a root directory con- taining that directory, rather than the contents of the directory. Filesystem filter options: -p PSEUDO-DEFINITION add pseudo file definition. The definition should be quoted. -pf PSEUDO-FILE add list of pseudo file definitions from PSEUDO-FILE, use - for stdin. Pseudo file definitions should not be quoted. -sort SORT_FILE sort files according to priorities in SORT_FILE. One file or dir with priority per line. Priority -32768 to 32767, default priority 0. -ef EXCLUDE_FILE list of exclude dirs/files. One per line. -wildcards allow extended shell wildcards (globbing) to be used in exclude dirs/files. -regex allow POSIX regular expressions to be used in exclude dirs/files. -max-depth LEVELS descend at most LEVELS of directories when scanning filesystem. -one-file-system do not cross filesystem boundaries. If a directory crosses the boundary, create an empty directory for each mount point. If a file crosses the boundary ignore it. -one-file-system-x do not cross filesystem boundaries. Like -one-file-system option ex- cept directories are also ignored if they cross the boundary. Filesystem extended attribute (xattrs) options: -no-xattrs do not store extended attributes (default). -xattrs store extended attributes (unsupported). -xattrs-exclude REGEX exclude any xattr names matching REGEX. REGEX is a POSIX regular expression, e.g. -xattrs-exclude '^user.' excludes xattrs from the user namespace. -xattrs-include REGEX include any xattr names matching REGEX. REGEX is a POSIX regular expression, e.g. -xattrs-include '^user.' includes xattrs from the user namespace. -xattrs-add NAME=VAL add the xattr NAME with VAL to files. If an user xattr it will be added to regular files and directories (see man 7 xattr). Otherwise it will be added to all files. VAL by default will be treated as binary (i.e. an uninterpreted byte sequence), but it can be prefixed with 0s, where it will be treated as base64 encoded, or prefixed with 0x, where val will be treated as hexidecimal. Additionally it can be prefixed with 0t where this encoding is similar to binary en- coding, except backslashes are specially treated, and a backslash followed by 3 octal digits can be used to encode any ASCII charac- ter, which obviously can be used to encode control codes. The op- tion can be repeated multiple times to add multiple xattrs. Mksquashfs runtime options: -version print version, licence and copyright message. -exit-on-error treat normally ignored errors as fatal. -quiet no verbose output. -info print files written to filesystem. -no-progress do not display the progress bar. -progress display progress bar when using the -info option. -percentage display a percentage rather than the full progress bar. Can be used with dialog --gauge etc. -throttle PERCENTAGE throttle the I/O input rate by the given percentage. This can be used to reduce the I/O and CPU consumption of Mksquashfs. -limit PERCENTAGE limit the I/O input rate to the given percentage. This can be used to reduce the I/O and CPU consumption of Mksquashfs (alternative to -throttle). -processors NUMBER use NUMBER processors. By default will use number of processors available. -mem SIZE use SIZE physical memory for caches. Use K, M or G to specify Kbytes, Mbytes or Gbytes respectively. -mem-percent PERCENT use PERCENT physical memory for caches. Default 25%. -mem-default print default memory usage in Mbytes. Filesystem append options: -noappend do not append to existing filesystem. -root-becomes NAME when appending source files/directories, make the original root be- come a subdirectory in the new root called NAME, rather than adding the new source items to the original root. -no-recovery do not generate a recovery file. -recovery-path NAME use NAME as the directory to store the recovery file. -recover NAME recover filesystem data using recovery file NAME. Filesystem actions options: -action ACTION@EXPRESSION evaluate EXPRESSION on every file, and execute ACTION if it returns TRUE. -log-action ACTION@EXPRESSION as above, but log expression evaluation results and actions per- formed. -true-action ACTION@EXPRESSION as above, but only log expressions which return TRUE. -false-action ACTION@EXPRESSION as above, but only log expressions which return FALSE. -action-file FILE as action, but read actions from FILE. -log-action-file FILE as -log-action, but read actions from FILE. -true-action-file FILE as -true-action, but read actions from FILE. -false-action-file FILE as -false-action, but read actions from FILE. Tar file only options: -default-mode MODE tar files often do not store permissions for intermediate directo- ries. This option sets the default directory permissions to octal MODE, rather than 0755. This also sets the root inode mode. -default-uid UID tar files often do not store uids for intermediate directories. This option sets the default directory owner to UID, rather than the user running Mksquashfs. This also sets the root inode uid. -default-gid GID tar files often do not store gids for intermediate directories. This option sets the default directory group to GID, rather than the group of the user running Mksquashfs. This also sets the root inode gid. -ignore-zeros allow tar files to be concatenated together and fed to Mksquashfs. Normally a tarfile has two consecutive 512 byte blocks filled with zeros which means EOF and Mksquashfs will stop reading after the first tar file on encountering them. This option makes Mksquashfs ignore the zero filled blocks. Expert options (these may make the filesystem unmountable): -nopad do not pad filesystem to a multiple of 4K. -offset OFFSET skip OFFSET bytes at the beginning of FILESYSTEM. Optionally a suf- fix of K, M or G can be given to specify Kbytes, Mbytes or Gbytes respectively. Default 0 bytes. -o OFFSET synonym for -offset. Miscellaneous options: -fstime TIME alternative name for -mkfs-time. -always-use-fragments alternative name for -tailends. -root-owned alternative name for -all-root. -noInodeCompression alternative name for -noI. -noIdTableCompression alternative name for -noId. -noDataCompression alternative name for -noD. -noFragmentCompression alternative name for -noF. -noXattrCompression alternative name for -noX. -help output this options text to stdout. -h output this options text to stdout. -Xhelp print compressor options for selected compressor. PSEUDO FILE DEFINITION FORMAT -p "filename d mode uid gid" create a directory. -p "filename m mode uid gid" modify filename. -p "filename b mode uid gid major minor" create a block device. -p "filename c mode uid gid major minor" create a character device. -p "filename f mode uid gid command" create file from stdout of command. -p "filename s mode uid gid symlink" create a symbolic link. -p "filename i mode uid gid [s|f]" create a socket (s) or FIFO (f). -p "filename x name=val" create an extended attribute. -p "filename l linkname" create a hard-link to linkname. -p "filename L pseudo_filename" same, but link to pseudo file. -p "filename D time mode uid gid" create a directory with timestamp time. -p "filename M time mode uid gid" modify a file with timestamp time. -p "filename B time mode uid gid major minor" create block device with timestamp time. -p "filename C time mode uid gid major minor" create char device with timestamp time. -p "filename F time mode uid gid command" create file with timestamp time. -p "filename S time mode uid gid symlink" create symlink with timestamp time. -p "filename I time mode uid gid [s|f]" create socket/fifo with timestamp time. COMPRESSORS AVAILABLE AND COMPRESSOR SPECIFIC OPTIONS gzip (default): -Xcompression-level COMPRESSION-LEVEL COMPRESSION-LEVEL should be 1 .. 9 (default 9). -Xwindow-size WINDOW-SIZE WINDOW-SIZE should be 8 .. 15 (default 15). -Xstrategy strategy1,strategy2,...,strategyN Compress using strategy1,strategy2,...,strategyN in turn and choose the best compression. Available strategies: default, filtered, huff- man_only, run_length_encoded and fixed. lzo: -Xalgorithm ALGORITHM Where ALGORITHM is one of: lzo1x_1, lzo1x_1_11, lzo1x_1_12, lzo1x_1_15, lzo1x_999 (default). -Xcompression-level COMPRESSION-LEVEL COMPRESSION-LEVEL should be 1 .. 9 (default 8) Only applies to lzo1x_999 algorithm. lz4: -Xhc Compress using LZ4 High Compression. xz: -Xbcj filter1,filter2,...,filterN Compress using filter1,filter2,...,filterN in turn (in addition to no filter), and choose the best compression. Available filters: x86, arm, armthumb, powerpc, sparc, ia64. -Xdict-size DICT-SIZE Use DICT-SIZE as the XZ dictionary size. The dictionary size can be specified as a percentage of the block size, or as an absolute value. The dictionary size must be less than or equal to the block size and 8192 bytes or larger. It must also be storable in the xz header as either 2^n or as 2^n+2^(n+1). Example dict-sizes are 75%, 50%, 37.5%, 25%, or 32K, 16K, 8K etc. zstd: -Xcompression-level COMPRESSION-LEVEL COMPRESSION-LEVEL should be 1 .. 22 (default 15). lzma: (no options) (deprecated - no kernel support) ENVIRONMENT SOURCE_DATE_EPOCH If set, this is used as the filesystem creation timestamp. Also any file timestamps which are after SOURCE_DATE_EPOCH will be clamped to SOURCE_DATE_EPOCH. See https://repro- ducible-builds.org/docs/source-date-epoch/ for more information. EXAMPLES mksquashfs DIRECTORY IMAGE.SQFS Create a Squashfs filesystem from the contents of DIRECTORY, writing the output to IMAGE.SQSH. Mksquashfs will use the default compres- sor (normally gzip), and block size of 128 Kbytes. mksquashfs DIRECTORY FILE1 FILE2 IMAGE.SQFS Create a Squashfs filesystem containing DIRECTORY and FILE1 and FILE2. If multiple sources are specified on the command line they will be combined into a single directory. mksquashfs DIRECTORY IMAGE.SQFS -b 1M -comp zstd Use a block size of 1 Mbyte and Zstandard compression to create the filesystem. mksquashfs DIRECTORY IMAGE.SQFS -e file1 file2 Exclude file1 and file2 from DIRECTORY when creating filesystem. No wildcard matching of files. mksquashfs DIRECTORY IMAGE.SQFS -wildcards -e "*.gz" Exclude anything in DIRECTORY which matches the wildcard pattern "*.gz". mksquashfs DIRECTORY IMAGE.SQFS -wildcards -e "... *.gz" Exclude files which match the wildcard pattern "*.gz" anywhere within DIRECTORY and its sub-directories. The initial "..." indi- cates the wildcard pattern is "non-anchored" and will match any- where. Note: when passing wildcarded names to Mksquashfs, they should be quoted (as in the above examples), to ensure that they are not processed by the shell. Using pseudo file definitions mksquashfs DIRECTORY IMAGE.SQFS -p "build_dir d 0644 0 0" Create a directory called "build_dir" in the output filesystem. mksquashfs DIRECTORY IMAGE.SQFS -p "version.txt l /tmp/build/version" Create a reference called "version.txt" to a file outside DIRECTORY, which acts as if the file "/tmp/build/version" was copied or hard- linked into DIRECTORY before calling Mksquashfs. mksquashfs DIRECTORY IMAGE.SQFS -p "date.txt f 0644 0 0 date" Create a file called "date.txt" which holds the output (stdout) from running the "date" command. mksquashfs DIRECTORY IMAGE.SQFS -p "\"hello world\" f 0644 0 0 date" As above, but, showing that filenames can have spaces, if they are quoted. The quotes need to be blackslashed to protect them from the shell. mksquashfs - IMAGE.SQFS -p "input f 0644 root root dd if=/dev/sda1 bs=1024" -p "/ d 0644 0 0" Create a file containing the contents of partition /dev/sda1". Or- dinarily Mksquashfs given a device, fifo, or named socket will place that special file within the Squashfs filesystem, the above allows input from these special files to be captured and placed in the Squashfs filesystem. Note there are no other sources than the pseudo file, and so the command line source is "-". If there are no other sources than pseudo files, the root (/) directory must be de- fined too, as seen in this example. unsquashfs -pf - IMAGE.SQFS | mksquashfs - NEW.SQFS -pf - Transcode IMAGE.SQFS to NEW.SQFS by piping the pseudo file output from Unsquashfs to Mksquashfs using stdout and stdin. This can con- vert from earlier Squashfs filesystems or change compression algo- rithm, block size etc. without needing to unpack into an intermedi- ate directory or file. Note: pseudo file definitions should be quoted (as in the above examples), to ensure that they are passed to Mksquashfs as a single argument, and to ensure that they are not processed by the shell. Using extended attribute options mksquashfs DIRECTORY IMAGE.SQFS -no-xattrs Do not store any extended attributes in the Squashfs filesystem. Any extended attributes in the source files will be ignored. mksquashfs DIRECTORY IMAGE.SQFS -xattrs-include "^user." Filter the extended attributes in the source files, and only store extended attributes in the user namespace in the Squashfs filesys- tem. mksquashfs DIRECTORY IMAGE.SQFS -xattrs-exclude "^user." Filter the extended attributes in the source files, and don't store any extended attributes in the user namespace in the Squashfs filesystem. mksquashfs DIRECTORY IMAGE.SQFS -xattrs-add "user.comment=hello world" Add the extended attribute called "user.comment" with the content "hello world" to all files and directories in the Squashfs filesys- tem. mksquashfs DIRECTORY IMAGE.SQFS -xattrs-add "user.comment=0thello world\012" Add the extended attribute called "user.comment" to all files and directories, but in this case the contents of the extended attribute will be "hello world" with a trailing newline character (012 octal). mksquashfs DIRECTORY IMAGE.SQFS -xattrs-add "user.com- ment=0saGVsbG8gd29ybGQ=" Add the extended attribute called "user.comment" to all files and directories, where the value is given in base64 encoding, represent- ing "hello world". mksquashfs DIRECTORY IMAGE.SQFS -action "-xattrs-include(^user.) @ type(f)" Filter the extended attributes but only in regular files (type f), and only store extended attributes in the user namespace. mksquashfs DIRECTORY IMAGE.SQFS -p "hello_world x user.comment=0tsalve mundi\012" Add the extended attribute called "user.comment" to the file called "hello_world", with the contents of the extended attribute being "salve mundi" with a trailing newline character (012 octal). Using Actions to not compress, change attributes etc. mksquashfs DIRECTORY IMAGE.SQSH -action "uncompressed @ (name(*.jpg) || name(*.mpg) ) || (name(*.img) && filesize(+1G))" Specify that any files matching the wildcards "*.jpg" and "*.mpg" should not be compressed. Additionally, it also specifies any files matching the wildcard "*.img" and are larger than 1 Gigabyte should be uncompressed too. This shows test operators can be combined with logical expressions. mksquashfs DIRECTORY IMAGE.SQSH -action "chmod(o+r)@! perm(o+r)" If any files within DIRECTORY are not readable by "others", then make them readable by others in the Squashfs filesystem. mksquashfs DIRECTORY IMAGE.SQSH -action "uid(phillip)@! perm(o+r)" As previous, match on any files which are not readable by "others", but, in this case change the owner of the file to "phillip" in the Squashfs filesystem. mksquashfs DIRECTORY IMAGE.SQSH -action "prune @ type(l) && ! exists" Delete any symbolic link within DIRECTORY which points outside of DIRECTORY, i.e. will be unresolvable in the Squashfs filesystem. mksquashfs DIRECTORY IMAGE.SQSH -action "exclude @ depth(3)" Create a Squashfs filesystem containing the two top most levels (contents of DIRECTORY and immediate sub-directories), and exclude anything at level 3 or below. mksquashfs DIRECTORY IMAGE.SQFS -action "-xattrs-include(^user.) @ type(f)" Filter the extended attributes but only in regular files (type f), and only store extended attributes in the user namespace. Note: actions should be quoted (as in the above examples), to ensure that they are passed to Mksquashfs as a single argument, and to ensure that they are not processed by the shell. AUTHOR Written by Phillip Lougher <phillip@squashfs.org.uk> COPYRIGHT Copyright (C) 2023 Phillip Lougher <phillip@squashfs.org.uk> This program is free software; you can redistribute it and/or modify it un- der the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later ver- sion. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FIT- NESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. SEE ALSO unsquashfs(1), sqfstar(1), sqfscat(1) The README for the Squashfs-tools 4.6.1 release, describing the new fea- tures can be read here https://github.com/plougher/squashfs-tools/blob/mas- ter/README-4.6.1 The Squashfs-tools USAGE guide can be read here https://github.com/plougher/squashfs-tools/blob/master/USAGE-4.6 The ACTIONS-README file describing how to use the new actions feature can be read here https://github.com/plougher/squashfs-tools/blob/master/AC- TIONS-README mksquashfs version 4.6.1 August 2026 MKSQUASHFS(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | PSEUDO FILE DEFINITION FORMAT | COMPRESSORS AVAILABLE AND COMPRESSOR SPECIFIC OPTIONS | ENVIRONMENT | EXAMPLES | AUTHOR | COPYRIGHT | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mksquashfs&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>